Castrol EDGE Professional Longlife III 5w-30
VISCOSITY - SAE 5w-30
Castrol EDGE Professional Longlife III 5w-30 Stronger Under Pressure
Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine’s performance. Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most. Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine, in accordance with the BSI PAS 2060 specification
Castrol EDGE Professional LongLife III 5W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3 5W-30 lubricant. It is also approved for use in vehicles that require a Porsche C30, VW 504 00/ 507 00 specification 5W-30 lubricant.
Please refer to your owner’s handbook.
Castrol EDGE Professional LongLife III 5W-30 is the natural choice for drivers who demand maximum engine performance from today’s sophisticated vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE Professional LongLife III 5W-30:
- Independently tested at the highest standards
- Recommended by world-leading car manufacturers
- Protects the engine for the entire drain interval even under extreme pressure
- Proven performance across a variety of driving conditions and temperatures
Name | Method | Units | Castrol EDGE Professional LongLife III 5W-30 |
Density @ 15C, Relative | ASTM D4052 | g/ml | 0.8513 |
Viscosity, Kinematic 100C | ASTM D445 | mm²/s | 12.0 |
Viscosity, CCS -30C | ASTM D5293 | mPa.s (cP) | 5800 |
Viscosity, Kinematic 40C | ASTM D445 | mm²/s | 70 |
Viscosity Index | ASTM D2270 | None | 169 |
Pour Point | ASTM D97 | °C | -42 |
Flash Point, PMCC | ASTM D93 | °C | 202 |
Ash, Sulphated | DIN 51575 | % wt | 0.64 |
ACEA C3
Porsche C30
VW 504 00/ 507 00
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
Request a quote for this product
"*" indicates required fields