Castrol EDGE 0w-30 A3/B4
01736 757002VISCOSITY - SAE 0w-30
Castrol EDGE 0w-30 A3/B4 Boosted with TITANIUM FST™ - Strength for Maximum Performance
Castrol EDGE boosted with TITANIUM FST™, provides outstanding oil strength, giving you the confidence to demand maximum engine performance from today’s modern, higher revving sports, performance and luxury vehicles requiring lower viscosity and higher-performance oils.
Castrol EDGE is our strongest and most advanced range of engine oils. Its TITANIUM FST™ gives up to double the strength against oil film breakdown while reducing friction between metal surfaces.
Castrol EDGE with TITANIUM FST™: helping your engine perform at its best.
Castrol EDGE 0W-30 A3/B4 is suitable for use in automobile, gasoline and diesel engines where the manufacturer recommends an ACEA A3/B3, A3/B4, API SN/CF or earlier specification 0W-40 lubricant. Castrol EDGE 0W-30 A3/B4 is approved for use in vehicles from leading manufacturers please refer to the specifications section and your owner’s handbook.
Castrol EDGE 0W-30 A3/B4 gives you the confidence to demand maximum engine performance from today’s modern, higher revving sports, performance and luxury vehicles requiring a high level of protection and higher performance low viscosity oils.
Castrol EDGE 0W-30 A3/B4
- Maximises short and long-term engine performance
- Improves engine efficiency, independently qualified
- Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
- Reduces engine deposits to help maximise engine response
- Exceed high performance standards set by premium car manufacturers including all FPV models, modern
- European and Japanese prestige vehicles
| Name | Method | Units | Castrol EDGE 0W-40 A3/B4 |
| Density @ 15C, Relative | ASTM D4052 | g/ml | 0.844 |
| Viscosity, Kinematic 100C | ASTM D445 | mm²/s | 12.2 |
| Viscosity, CCS -35C (0W) | ASTM D5293 | mPa.s (cP) | 5850 |
| Viscosity, Kinematic 40C | ASTM D445 | mm²/s | 63 |
| Viscosity Index | ASTM D2270 | None | 197 |
| Pour Point | ASTM D97 | °C | -45 |
| Flash Point, PMCC | ASTM D93 | °C | 203 |
| Ash, Sulphated | ASTM D874 | % wt | 1.13 |
ACEA A3/B3, A3/B4
API CF/SN
Meets Ford WSS-M2C937-A
MB-Approval 229.3/ 229.5
Porsche A40
VW 502 00 / 505 00
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, or exposed to hot sun or freezing conditions.
