Castrol Alphasyn T 10

Castrol Alphasyn T 10 synthetic lubricant is based on polyalpha-olefin (PAO) fluids and sulphur/phosphorus antiwear additive technology providing outstanding thermal stability and good load-carrying capacity.

Castrol Alphasyn T 10 has been formulated for use in spindle and central lubrication systems with high thermal loads. It has a very low pour point and excellent viscosity/temperature characteristics.

The outstanding oxidation and thermal stability of Alphasyn T 10 allows oil change intervals to be extended in circumstances where extreme temperatures result would result in a short service if conventional mineral oil based lubricants were used. This allows cost savings to be made by reducing the level of maintenance required.

Alphasyn T 10 is fully compatible with nitrile, silicone and fluropolymer seal materials.

Castrol Alphasyn T 10 Lubricant Advantages:

• Good thermal and oxidative stability provides reliable operation and extended operating life when compared to mineral oil-based products.
• The inherently high viscosity index makes the product suitable for operations operating over a wide temperature range.
• Good water separation and demulsification characteristics mean reduced down time through prolonged lubricant life and increased equipment reliability.
• PAO-based lubricant provides good compatibility with seals, paints and mineral oil-based lubricants.

All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings. Castrol Alphasyn T 10 should not be stored above 60°C, exposed to hot sun or freezing conditions.

Download Technical Data Sheet

Download Safety Data Sheet

Contact Us