Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Brand...

Transmission & Gear

Total EP 80W-90 - Gear Oil - 117261

Total EP 80W-90 - Gear Oil - 117261

 

Applications:

  • Synchronized and non-synchronized gearboxes, mild loaded axles, transfer boxes.
  • All gears requiring MIL-L-2105 or API GL-4 level.
  • Approved by ZF for the lubrication of their gearboxes (without Intarder) with standard drain interval.

 

Properties:

  • High viscosity index, allowing enough fluidity at low temperature to keep the functionality of the gearbox in cold start conditions, while maintaining enough oil film thickness for optimal bearing protection.
  • High Extreme-Pressure and antiwear properties for an enhanced durability of gears and synchromeshes.
  • Good antiwear, antioxidant, antifoam, anticorrosive and antirust properties.

 

Specifications:

  • API GL-4
  • MAN 341 type E-1 / Z-2
  • ZF TE-ML 02A, 16A, 17A,19A

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Dynatrans DA 80W-90 - Lubricant - 154941

Total Dynatrans DA 80W-90 - Lubricant - 154941

 

Lubricant for axles equipped with limited slip disc self-locking differential systems.

 

Applications:

  • Lubrication of axles equipped with limited slip self-locking differential systems for worksite equipment and agricultural machinery and also for 4 wheel drive passenger cars.
  • May also be used in traditional hypoid axles not equipped with limited slip axles.

 

Performance:

Classifications - API : GL-5-LS, MIL.L. : 2105D

Manufacturers Approvals - ZF : TE-ML 05C / 12C / 21C

Meets Manufacturers Specifications:

  • Worksite equipment: LIEBHERR, TEREX, VOLVO, CASE, JCB …
  • Agricultural tractors: CLAAS-RENAULT, DEUTZ, FORD M2C 104A, STEYR…
  • 4 Wheel Drive passengers cars and all roads vehicles

 

Advantages:

  • Guarantees the high cleanliness of the limited slip discs installed in the axle.
  • Prevents noise and vibration under intensive use.
  • Thanks to its specific Extreme Pressure additives, it provides maximum protection of very highly loaded gears and gears subject to shocks.
  • Excellent compatibility with the disk friction materials.
  • Excellent performance with respect to seals.

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Castrol Syntrax Universal 80W-90 - Universal fluid for manual transmissions and

Castrol Syntrax Universal 80W-90 - Universal fluid for manual transmissions and axles - 1823

 

Castrol Syntrax Universal 80W-90 is a part-synthetic SAE 80W-90 multipurpose manual transmission and final drive lubricant. It is particularly recommended for use in highly loaded final drives and differentials of commercial vehicles where API GL-5 performance is required and it carries a number of approvals. Additionally it may be used in synchronised manual transmissions requiring API GL-4 or GL-5 fluids.

 

Advantages:

  • A single product for transmissions and final drives reducing inventory and the potential for misapplication
  • High temperature stability gives superior performance and extended drain potential.
  • Proven performance as a problem solver in differentials operating in hot climates under arduous conditions.
  • Optimised synchroniser performance gives smooth gear shifting at all temperatures.
  • High shear stability maintains performance over the life of the lubricant.
  • Excellent wear protection particularly at high temperatures extends component life and reduces maintenance costs

 

Product Performance Claims:

  • API GL-4/GL-5
  • MAN 341 Typ E2 M 3343 Typ M
  • MB-Approval 235.0
  • Scania STO 1:0
  • ZF - TE-ML 02B
  • ZF - TE-ML 05A
  • ZF - TE-ML 12E
  • ZF - TE-ML 16C
  • ZF - TE-ML 17B
  • ZF - TE-ML 19B
  • ZF - TE-ML 21A

 

Pack sizes available - 20ltr, 208ltr, bulk delivery

Discover More +
Castrol Manual EP 80W-90 - Manual Transmission Fluid - 1896

Castrol Manual EP 80W-90 - Manual Transmission Fluid - 1896

 

Castrol Manual EP 80W-90 is a mineral based fluid suitable for use in applications where API GL-4 performance is required. Approved for use in ZF manual transmissions.

 

  • High thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission.
  • Good antiwear and load carrying characteristics extend the life of components.

 

Product Performance Claims:
API GL-4
ZF TE-ML 02B, 16A, 17A, 19A

 

Pack sizes available - 12x1ltr, 20ltr, 208ltr drums

Discover More +
Total Transmission TM Multigrade 80W-90 - Gear Oil - 110861

Total Transmission TM Multigrade 80W-90 - Gear Oil - 110861

 

Applications:

  • Oil specially adapted to very stringent requirements; when very high Extreme-Pressure and antiwear levels are aimed in high temperature conditions.
  • Manual gear boxes, transfer boxes, rear axles and differentials when an oil API GL-5 is required.
  • Passenger cars, light commercial, industrial vehicles and trucks.

 

Specifications:

  • API GL-5

 

Advantages:

  • SAE 80W-90 super multigrade: Total Transmission TM Multigrade viscosity is especially low at cold temperatures which leeds to a super SAE 80W (at -26°C its viscosity is 40 000 mPa.s to be compared with 150 000 mPa.s maxi for the 80W grade).
  • Very high viscosity index providing an excellent lubrication and allowing easy gear changes at low temperatures as well as at high temperatures.
  • Very high Extreme-Pressure properties.
  • Exceptional stability in operation.
  • Excellent resistance to oxidation.
  • Excellent antiwear, antifoam, anticorrosion and antirust properties.

 

Pack sizes available - 18x1ltr, 3x5ltr, 20ltr, 208ltr drum, 1000ltr IBC, bulk delivery

Discover More +
Total Transmission RS FE 80W-90 - Semi-Synthetic Gearbox and Axle Oil - 120724

Total Transmission RS FE 80W-90 - Semi-Synthetic Gearbox and Axle Oil - 120724

 

Applications:

  • Semi-synthetic oil with a high viscosity index for the lubrication of gears under severe conditions of use.
  • Designed to meet the challenge of the T.D.L. (Total Drive Line) concept: high performance lubrication of hypoid axles as well as synchronized gearboxes, to simplify maintenance without any compromise on components durability.
  • Is recommended for use on manual gearboxes, rear axles, or any gear assembly requiring API GL-4, API GL-5, API MT-1 or SAE J2360 levels of performance.
  • Allows extended service intervals up to 160 000 km on ZF axles and gearboxes (without Intarder), and more generally on all commercial vehicles hypoid axles.
  • Suitable for use on Scania gearboxes.

 

Specifications:

  • MAN 3343 type M (ex MAN 3343 type ML)
  • ZF TE-ML 02B, 05A, 07A, 12E, 16B, 17B,19B, 21A

Meets the performance requirements of the following international specifications :

  • API GL-4
  • API GL-5
  • API MT-1
  • MIL-PRF-2105E / SAE J2360

 

Advantages:

  • Very good low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Very high extreme-pressure performance for optimal protection of gears and bearings against scoring and scuffing.
  • Excellent antiwear, anticorrosion and antirust properties for the durability of components including gearbox synchronizers.
  • Semi synthetic formulation, very resistant to oxidation and allowing extended drain intervals (up to 160 000 kms) compared to standard mineral.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Transmission X4 80W-90 - Multigrade Oil - 166276

Total Transmission X4 80W-90 - Multigrade Oil for limited slip differential, axle and transfer gear box - 166276

 

Applications:

  • Total Transmission X4 is an oil specially designed for the lubrification of axles equipped with limited slip differentials, some classical axles and transfer gear boxes.
  • Suitable for use in all passenger cars and light commercial vehicles when the manufacturer requires an oil with specific friction properties.
  • Total Transmission X4 is recommended by PSA for use in Citroen and Peugeot 4 wheel drive cars and vans.

 

 

Specifications: 

  • API GL-5
  • PSA PEUGEOT CITROEN B71 2375

 

Advantages:

  • High viscosity index.
  • Special friction properties.
  • Very high Extreme-Pressure properties.
  • High heat stability.
  • Excellent wear reducing properties, high oxydation resistance and antirust properties.

 

Pack sizes available - 18x1ltr

Discover More +
Total Transmission Dual 8 FE 80w/90 - Transmission Oil - 201875

Total Transmission Dual 8 FE 80w/90 - Transmission Oil - 201875

 

TOTAL TRANSMISSION DUAL 8 FE 80W-90 is an oil of synthetic based technology with a high viscosity index for the lubrication of gears under severe conditions of use.

 

Applications:

TOTAL TRANSMISSION DUAL 8 FE 80W-90 is designed to meet the challenge of the T.D.L. (Total Drive Line) concept: high performance lubrication of hypoid axles as well as synchronized gearboxes, to simplify maintenance without any compromise on components durability.

TOTAL TRANSMISSION DUAL 8 FE 80W-90 is recommended for use on manual gearboxes, rear axles, or any gear assembly requiring API GL-4, API GL-5, API MT-1 or SAE J2360 levels of performance.

TOTAL TRANSMISSION DUAL 8 FE 80W-90 is suitable for the manual transmission of several OEMs such as MAN, DAF, IVECO and RENAULT TRUCKS with extended drain intervals.

 

International Standards:

  • API GL-4
  • API GL-5
  • API MT-1
  • SAE J2360

 

Manufacturers Approvals:

  • MAN 341 TYPE E2, Z2
  • MAN 342 TYPE M2
  • ZF TE-ML 02B, 05A, 12L, 12M, 16B, 17B, 19B, 21A

 

Advantages:

  • Reduced fuel consumption in comparison with standard lubricants due to TOTAL’s Fuel Economy technology.
  • Reduced cost of maintenance: specially formulated to reach the drain intervals recommended by the manufacturer.
  • Suitable for multi-brand fleet customers: this lubricant adapted for gearboxes and axles of several OEM, thus enabling customers to use this lubricant for the whole fleet.
  • Improved protection of axles and manual gearboxes against wear and corrosion due to extreme-pressure properties of oil.
  • Improved driver start up experience: low temperature fluidity due to a high viscosity index, generating benefits during cold starts and limiting drag losses and fuel consumption.
  • Improved stability in operation due to high viscosity index.
  • High compatibility with oil filters due to antifoam properties.

 

Pack sizes available - 208ltr barrels, 20ltr drums

Discover More +
Total Transmission Gear 7 80w/90 - Transmission Oil - 201293

Total Transmission Gear 7 80w/90 - Transmission Oil - 201293

 

Applications:

TOTAL TRANSMISSION GEAR 7 80W-90 is designed for synchronized and non-synchronized gearboxes, mild loaded axles, transfer boxes and all gears requiring MIL-L-2105 or API GL-4 level.

TOTAL TRANSMISSION GEAR 7 80W-90 is approved by ZF for the lubrication of their gearboxes (without Intarder) with standard drain interval.

 

International Standards:

  • API GL-4

 

Manufacturers Approvals:

  • MAN 341 type E-1 / Z-2
  • ZF TE-ML 16A, 17A, 19A

 

Advantages:

  • Efficient protection of gears against wear and corrosion due to stable extreme-pressure properties.
  • High compatibility with oil filters due to antifoam properties.
  • Efficient stability in operation due to high viscosity index.

 

Pack sizes available - 208ltr barrels, 20ltr drums

Discover More +
Total Transmission Axle 7 80w/90 - Transmission Oil for Axles - 201286

Total Transmission Axle 7 80w/90 - Transmission Oil for Axles - 201286

 

TOTAL TRANSMISSION AXLE 7 80W-90 is extreme pressure mineral oil for the lubrication of highly loaded gears (axles, final drives, transfer cases, planetary gearboxes) when an API GL-5 level of performance is required.

 

Applications:

TOTAL TRANSMISSION AXLE 7 80W-90 is specially recommended for ZF and MAN hypoid gears, with standard drain interval.

 

International Standards:

  • API GL-5

 

Manufacturers Approvals:

  • ZF TE-ML 12E, 17B, 19B
  • MAN 342 type M-1

 

Advantages:

  • Efficient protection of gears against wear and corrosion due to stable extreme-pressure properties.
  • High compatibility with oil filters due to antifoam properties.
  • Efficient stability in operation due to high viscosity index.

 

Pack sizes available - 208ltr barrels, 20ltr drums, 1000ltr IBC's, bulk, 18x1ltr pack, 3x5ltr pack

Discover More +