Kernow Oils - Lubricant Solutions

Industrial

Total Biohydran RS 38 B - Biodegradable hydraulic oil - 112707

Total Biohydran RS 38 B - Biodegradable hydraulic oil - 112707

 

Applications:

  • BIOHYDRAN RS 38 B is a vegetable oil based biodegradable hydraulic fluid.
  • Applied as a replacement of hydraulic mineral oils in activities such as civil engineering, construction, quarrying, gravel plies,…
  • BIOHYDRAN RS 38 B is particularly recommended when there is a possible contamination of water : forestry operations, off-shore, river dredging, winter sport,…
  • BIOHYDRAN RS 38 B can replace mineral oils after a complete drain of the circuit followed by a replacement of the filter.

 

Specifications:

VDMA 24568 TYP HETG

 

Advantages:

  • Outstanding anti-wear properties which provide a long live time for all moving parts.
  • Good protection against rust and corrosion.
  • Miscible with most mineral and biodegradable oils.
  • Outstanding viscosimetric performances offering a very wide range of operating temperatures. Very high natural viscosity index.
  • Very good shear stability, permitting the best optimum working conditions for hydraulic equipment.

 

Pack sizes available - 208L drums

Discover More +
Total Lactuca LT 3000 - Metalworking - 115806

Total Lactuca LT 3000 - Metalworking - 115806

 

Macro-emulsion for copper alloys and medium carbon steels machining.

 

Applications:

  • LACTUCA LT 3000 is specially designed for traditional machining of copper alloys and bar turning.
  • LACTUCA LT 3000 provides also full satisfaction for all operations on fine carbon steels.
  • Recommended rate of use: from 3 to 7%.
  • Protection of machined and non machined surfaces, mechanical parts that must be protected temporarily and for which the protective product must be easily eliminated.

 

Specifications:

  • ISO 6743/7
  • ISO-L MAA

 

Advantages:

  • LACTUCA LT 3000 is very easy to use, simply by pouring it into good quality water.
  • Excellent cooling and lubricant power.
  • Efficient protection of machined parts and machines against corrosion.
  • Good mechanical performances, providing:

               - Reduced cutting efforts
               - Extended tool lifetime
               - Very good surface finish to parts.

  • Properties in service:

               - Excellent stability over time increases drain intervals;
               - Cuttings have low rate of humidity;
               - Good anti-foaming properties.

  • Resist to the development of bacteria and mould very well,so is more environmentally and operator friendly.
  • Very multifunctional.

 

Health and Safety:

  • Does not contain: formaldehyde liberators or boron.
  • Is free of: chlorine, PTBB, nitrite, NPE and DEA.

 

Pack sizes available - 20L

Discover More +
Total Martol EP 65 CF - Extreme pressure stamping oil - 115809

Total Martol EP 65 CF - Extreme pressure stamping oil - 115809

 

Applications:

  • Cutting, stamping, forming.
  • Spinning connecting shaft.
  • Steel wiredrawing.
  • Product is particularly suitable for stamping that must not come into contact with chlorinated products.
  • Allows stamping operations in several passes without regreasing.
  • Meet the automotive industry requirements.

 

Advantages:

  • Doped fluid mineral oil without any additive containing chlorine.
  • Excellent spreading of oil film.
  • This original formulation takes into account the need to improve working conditions and additional convenience for users.
  • Lubricity, anti-wear and extreme-pressure doping give improved tool edge retention and extremely good surface finish - factors which all contribute towards reducing production costs.
  • Good stamping capacity.
  • Removal: degrease using normal solvents and hot alkaline lyes.
  • We have formulated chlorine-free products in response to the need to protect the environment and the requirements of certain industries.
  • This oil offers performance completely comparable to that obtained using an equivalent chlorinated product that has the advantage of not causing pollution as well as less expensive disposal.
  • Very good anticorrosion properties.

 

Pack sizes available - 20L

Discover More +
Total Martol LVG 15 CF - Pressing oil evanescent fluid - 115850

Total Martol LVG 15 CF - Pressing oil evanescent fluid - 115850

 

Applications:

  • Fine pressing of aluminium.

 

Advantages:

  • Colourless mineral oil.
  • Excellent wettability on aluminium.
  • Odourless.
  • This original formulation takes into account the need to improve working conditions and additional convenience for users.
  • Lubricity, anti-wear and extreme-pressure doping give improved tool edge retention and extremely good surface finish - factors which all contribute towards reduced production costs.
  • We have formulated chlorine-free products in response to the need to protect the environment and the requirements of certain industries.
  • Residue < 0.05 % by mass after passage through stove at 200°C for two hours.
  • Does not leave marks on aluminium.
  • This oil offers performance completely comparable to that obtained using an equivalent chlorinated product that has the advantage of not causing pollution as well as less expensive disposal.
  • This oil contains selected petroleum bases and additives designed to guarantee:

                       - residue < 0.05 % by mass.

                       - excellent wettability on aluminium.

                       - no marks on aluminium during heat treatment of aluminium.

                       - product does not contain chlorine.

 

 

Pack sizes available - 208L drums

Discover More +
Total Martol LVG 25 CF - Metalworking - 115852

Total Martol LVG 25 CF - Metalworking - 115852

 

Applications:

  • MARTOL LVG 25 is an evaporating oil for low and medium severe drawing on steel and non-iron metals.
  • MARTOL LVG 25 can be applied with a brush by spraying or with a roller.

 

Advantages:

MARTOL LVG 25 CF is characterised by:

  • Its evaporating character.
  • A good wetability of the lubricant which assure an excellent surface covering.
  • Can be used in certain cases on coated metal.
  • Leaves a thin film and degreasing operation is most of the time unnecessary.

 

Pack sizes available - 208L drums

Discover More +
Total DIEL MS 7000 - Electro Discharge Machine Fluid - 115858

Total DIEL MS 7000 - Electro Discharge Machine Fluid - 115858

 

Applications:

Multifunctional fluid particularly suitable for semi finishing and finishing operations when the shapes are complex and with very accurate dimensions.

 

Specifications:

  • CHARMILLES TECHNOLOGIES (Switzerland)
  • ONA (Spain and France)
  • INGERSOLL (France)
  • INGERSOLL HANSEN (France)
  • AGIE (Switzerland and France)

 

Advantages:

  • Very clear fluid mineral oil.
  • Good resistance to oxidation.
  • High flash point.
  • This product was chosen for its very narrow petroleum cut (low volatility).
  • Very low aromatics content.
  • Low pour point, possibility of storage outside.

 

Pack sizes available - 208L drums

Discover More +
Total Lactuca MS 7000 - Metalworking - 115883

Total Lactuca MS 7000 - Metalworking - 115883

 

Chlorine-free macro-emulsion for difficult machining processes.

 

Applications:

  • LACTUCA MS 7000 is specially designed for the lubrication of difficult and extremely difficult machining operations.
  • LACTUCA MS 7000 is intended for the machining of ferrous and non-ferrous metals: cast iron, hard steels, alloy steels, stainless steels, aluminium and alloys.
  • Recommended proportions:

              - severe machining : 6 to 9%
              - very severe machining : 7 to 12%

 

Specifications:

  • ISO 6743/7
  • ISO-L MAD

 

Advantages:

  • The excellent cooling properties and the inclusion of new generation extreme-pressure additives reduce cutting forces, thus extending tool life and improving the surface finish of machined parts.
  • Very easy to use: simply pour LACTUCA MS 7000 into good quality water.
  • Excellent stability over time.
  • Good corrosion protection of machined parts and machines.
  • Non-foaming.

 

Health and safety:

  • LACTUCA MS 7000 has no particular smell and contains no phenols, nitrites, PTBB, chlorine or diethanolamine (DEA).
  • LACTUCA MS 7000 satisfies the German TRGS 611 legislation (technical rules governing the handling of hazardous substances).

 

Pack sizes available - 208L drums

Discover More +
Total Cortis MS 150 - Ashless anti-wear mineral circulating oil - 119663

Total Cortis MS 150 - Ashless anti-wear mineral circulating oil - 119663

 

Applications:

CORTIS MS is a multi purpose anti-wear circulating oil. CORTIS MS is meeting the technical requirements of hydrodynamic MORGOIL and DANIELI bearings used in rolling mills.

 

Specifications:

  • DANIELI® BGV and ESS bearings
  • MORGOIL® Standart Lubricant - SN 180 Part 3
  • MORGOIL® Advanced Lubricant - SN 180 Part 4

 

Advantages:

  • Excellent oxidation and thermal stability: extended drain intervals.
  • Very good desemulsibility behaviour at high and low temperature. Pass the UEC dynamic desemulsibility endurance test.
  • Very good anti-wear properties.
  • Non EP lubricant offering good rust and corrosion protection at high temperature.
  • Ashless additivation with high hydrolytic stability: preventing deposits and maintaining good filtrabilty properties.

 

Pack sizes available - 208L drums

Discover More +
Total Carter SH 1000 - Synthetic oil - 120615

Total Carter SH 1000 - Synthetic oil - 120615

 

Synthetic oil (PAO) for enclosed gears.

 

Applications:

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.
- bevel and spur gears
- Heavily loaded bearings and gear couplings.

 

Specifications:

  • DIN 51517 Part 3 ⇒group CLP
  • NF-ISO 6743-6 category CKD

Manufacturers Approval:

  • AISI 224
  • CINCINNATI MILACRON
  • DAVID BROWN
  • FLENDER
  • USINOR FT 161
  • MÜLLER WEINGARTEN
  • AGMA 9005 - E02

 

Advantages:

  • Very high protection (high and low temperatures) from micropitting scuffing wear (GFT - class: high).
  • Excellent extreme-pressure performance: protection against high loads.
  • Very high natural viscosity index: (shear stable) and low friction coefficient.
  • Very low pour point: operation at very low temperatures.
  • Very good resistance to oxidation: operation at high temperatures, and lifetime increased by a factor of 2 to 4.
  • Compatible with seals and metals containing copper.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter SH 460 - Synthetic oil - 120616

Total Carter SH 460 - Synthetic oil - 120616

 

Synthetic oil (PAO) for enclosed gears.

 

Applications:

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.
- bevel and spur gears
- Heavily loaded bearings and gear couplings.

 

Specifications:

  • DIN 51517 Part 3 ⇒group CLP
  • NF-ISO 6743-6 category CKD

Manufacturers Approval:

  • AISI 224
  • CINCINNATI MILACRON
  • DAVID BROWN
  • FLENDER
  • USINOR FT 161
  • MÜLLER WEINGARTEN
  • AGMA 9005 - E02

 

Advantages:

  • Very high protection (high and low temperatures) from micropitting scuffing wear (GFT - class: high).
  • Excellent extreme-pressure performance: protection against high loads.
  • Very high natural viscosity index: (shear stable) and low friction coefficient.
  • Very low pour point: operation at very low temperatures.
  • Very good resistance to oxidation: operation at high temperatures, and lifetime increased by a factor of 2 to 4.
  • Compatible with seals and metals containing copper.

 

Pack sizes available - 20L, 208L drums, 1000L IBC

Discover More +