Kernow Oils - Lubricant Solutions

Industrial

Total Carter SY 320 - Synthetic lubricant (polyglycol) - 112371

Total Carter SY 320 - Synthetic lubricant (polyglycol) - 112371

 

Applications:

  • Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).
  • Lubrication of worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • NF-ISO 6743-6 category CKS/CKT

Manufacturers: DAVID BROWN, CMD

 

Advantages:

  • Very high and shear stable viscosity index.
  • Low coefficient of friction: greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil.
  • Excellent thermal stability: extended oil lifetime.
  • Very good foaming behaviour.
  • Excellent extreme pressure and anti-wear properties.
  • Very high level corrosion protection (tested with sea and acidic water).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter SY 460 - Synthetic lubricant (polyglycol) - 112373

Total Carter SY 460 - Synthetic lubricant (polyglycol) - 112373

 

Applications:

  • Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).
  • Lubrication of worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • NF-ISO 6743-6 category CKS/CKT

Manufacturers: DAVID BROWN, CMD

 

Advantages:

  • Very high and shear stable viscosity index.
  • Low coefficient of friction: greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil.
  • Excellent thermal stability: extended oil lifetime.
  • Very good foaming behaviour.
  • Excellent extreme pressure and anti-wear properties.
  • Very high level corrosion protection (tested with sea and acidic water).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Cirkan C 220 - Lubrication - 112404

Total Cirkan C 220 - Lubrication - 112404

 

High quality oils for moving parts.

 

Applications:

CIRKAN C oils are pure mineral oils with appropriate viscosities for loss lubrication of:
- moving parts
- swivels
- journals
- chains

Specifications:

  • ISO 11158 Category HH
  • ISO 6743/4 Category HH

 

Advantages:

  • High natural viscosity index
  • Compatible with seals
  • High ignition point
  • Benefits from advanced refining: almost transparent in appearance.

 

Pack sizes available - 208L drums

Discover More +
Total Finavestan A 210 B - Medicinal White Oils - 112414

Total Finavestan A 210 B - Medicinal White Oils - 112414

 

Applications:

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:
  • Polymer: plasticizer & external lubricant for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
  • Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
  • Paper: cut and slit lubricant.
  • Dust binder, defoamer, furniture polishes.
The application is subject to the applicable laws and regulations in each country.
  • CAS number: 8042-47-5
  • EINECS number: 232-455-8
  • INCI number (EU): Paraffinum Liquidum

 

Specifications:

 

FINAVESTAN white oils meet the requirements of the following specifications:
  • European Pharmacopoeia, most recent edition
  • US Pharmacopoeia, most recent edition
  • US FDA, 21 CFR 178.3620(a), White Mineral Oil
  • European Regulation 2011/10/CE relating to plastic materials and articles intended to come into contact with foodstuffs.
  • FINAVESTAN white oils are NSF H1 registered, suitable for incidental food contact.

 

Advantages:

  • FINAVESTAN white oils are obtained from petroleum through several important refining stages that guaranty their extremely high purity.
  • FINAVESTAN are transparent and colourless oils. They are also odourless and tasteless.
  • As medicinal grades, FINAVESTAN white oils meet the requirements of the cosmetic, pharmaceutical and food-related industry subject to the regulations in each country.

 

Pack sizes available - 208L drums

Discover More +
Total Azolla DZF 46 - Hydraulic Oil - 112419

Total Azolla DZF 46 - Hydraulic Oil - 112419

 

Detergent anti-wear hydraulic oils.

 

Applications:

  • Any hydraulic circuits where significant amounts of water are unavoidably introduced and when it is impossible to drain off the water (for instance on circuits that work around the clock).
  • Any hydraulic circuits working under loaded conditions : lubrication of stamping presses for example (Müller Weingarten approval).

 

Specifications:

ISO 6743/4
DIN 51 524 p 2, HLP (except desemulsibility)
AFNOR NF E 48 603 HM (except desemulsibility)
MAN N 698 H-LPD
MÜLLER WEINGARTEN

 

Advantages:

  • Detergent characteristics allowing the fluid to absorb large quantities of water while preserving its properties.
  • High thermal stability giving the fluid good resistance at high operating temperatures.
  • Excellent antiwear capacity ensuring an extended life time of product.
  • Excellent level of resistance to foaming (silicon free defoamer) together with rapid air release.
  • Specially formulated to provid good filterability even in presence of high water content.

 

Pack sizes available - 208L drums, 1000L IBC

Discover More +
Total Lunaria FR 32 - Compressor Oil - 112427

Total Lunaria FR 32 - Compressor Oil - 112427

 

Wax free naphtenic mineral oils for refrigerating compressors.

 

Applications:

  • Lubrication of cylinders, bearing and seals of all types of refrigerating compressors.
  • Lubrication of rotary screw compressors:

               - parallel screw
               - single screw with Zimmern type gear.

  • The LUNARIA FR are compatible with most of chlorofluorinated refrigerant gases and with ammonia in compatible service conditions (evaporator temperature higher than - 15 °C). For refrigerating applications with low temperature ammonia, it is recommended to use the specific lubricants LUNARIA NH or LUNARIA SH.

 

Specifications:

  • ISO 6743-3 : DRA.

OEM Approvals - APV, BOCK, BITZER, GRAM, CARRIER, GRASSO, HOWDEN, J&E HALL, SABROE, YORK.

 

Advantages:

  • High chemical stability with refrigerants.
  • Absence of copper plating.
  • Very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (evaporator temperature higher than - 15 °C).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Lunaria NH 68 - Compressor Oil - 112440

Total Lunaria NH 68 - Compressor Oil - 112440

 

Additive enhanced hydrocracked mineral oil for ammonia (R 717) refrigerating compressors.

 

Applications:

  • Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
  • Hydrocracked technology of base oils to improve oil drain interval.
  • Field of application: evaporator temperature down to -30°C.

 

Specifications:

OEM Approvals - APV, BOCK, J&E HALL, GRAM, GRASSO, HOWDEN, SABROE.

 

Advantages:

  • High resistance to oxidation in the presence of ammonia. Base oils and additivation system specillay selected to avoid the formation of black sludges (reaction between oil and ammonia).
  • Low pour point, eliminating the risk of any residual lubricant freezing in the evaporator, thereby providing excellent heat exchange.
  • Very high flash point given the low volatility of LUNARIA NH oils: oil consumption is reduced by 30 to 50 % compared with conventional oils.
  • Good compatibility with common elastomers (chloroprene, NBR….).

 

Warning: Must be kept in storage to avoid the presence of water within the oil. Water could block the evaporator.

 

Pack sizes available - 208L drums

Discover More +
Total Lunaria SH 46 - Compressor Oil - 112445

Total Lunaria SH 46 - Compressor Oil - 112445

 

Full-synthetic PAO based oil for ammonia (R 717) refrigerating compressors.

 

Applications:

  • Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
  • PAO (polyalphaolefin) base oils to improve oil drain interval and ensure good performances even at very low temperature.
  • Field of application: evaporator temperature down to -50°C.

 

Specifications:

  • OEM Approvals - APV, BOCK, J&E HALL, GRAM, GRASSO, HOWDEN, SABROE.
  • NSF-H1 registered certificate number: 139826: LUNARIA SH 46

 

Advantages:

  • High resistance to oxidation in the presence of ammonia. Synthetic base oils and additivation system specially selected to avoid the formation of black sludges (reaction between oil and ammonia).
  • Low pour point, eliminating the risk of any residual lubricant freezing in the evaporator, thereby providing excellent heat exchange.
  • Very high flash point given the low volatility of LUNARIA SH oils: oil consumption is reduced by 30 to 50 % compared with conventional oils.
  • Good compatibility with common elastomers (chloroprene, NBR….).

 

Warning: Must be kept in storage to avoid the presence of water within the oil. Water could block the evaporator.

 

Pack sizes available - 208L drums

Discover More +
Total Azolla VTR 32 - Hydraulic transmission fluid - 112450

Total Azolla VTR 32 - Hydraulic transmission fluid - 112450

 

Hydraulic transmission fluid for turbo transmissions.

 

Applications:

AZOLLA VTR 32 is formulated for the use in turbo-transmissions with hydraulic couplings, converters and retarders and for the lubrication of all included mechanical parts : bearings and gearboxes. Especially designed for the use in VOITH TURBO transmissions. AZOLLA VTR 32 can be also used as a high performance hydraulic oil, with well balanced detergent and dispersant properties.

 

Specifications:

VOITH TURBO Specifications 3.90-8e 2/97 – Approval list 3.285 – 149 version 2.1 / Sept 2002

 

Advantages:

  • Excellent thermal oxidation stability.
  • Superior anti-wear characteristics.
  • Quick air release and good anti-foam properties.
  • Good behaviour towards system components.
  • Good detergent and dispersant properties
  • Good behaviour towards elastomers.
  • Low pour point.

 

Pack sizes available - 208L drums

Discover More +
Total Equivis XV 32 - Hydraulic Oils - 112451

Total Equivis XV 32 - Hydraulic Oils - 112451

 

Very high viscosity index anti-wear hydraulic oils with high shear resistance.

 

Applications:

Equivis XV is a range of anti-wear hydraulic fluids recommended for all kind of hydraulic circuits operating within a very wide temperature range. Their excellent viscosimetric properties and their high shear resistance make the oils especially suitable for the use in mobile machines hydraulic systems intended for cold regions or which have to work in low temperature environments such as cold stores.

 

Advantages:

  • Very high viscosity index (VI > 250).
  • Very high shear stability to ensure proper working of the hydraulic system in a very wide temperature range even under extreme shear rate conditions.
  • Easy low temperature operation due to a very low pour point and an exceptional viscosimetric behaviour.
  • High protection against wear insuring maximum equipment life.
  • Superior thermal and hydrolysis stability.
  • Good oxidation stability ensuring a long service life of the fluid
  • Excellent protection against rust and corrosion.
  • Good anti-foam, air release and desemulsibility properties.
  • Good behaviour towards current elastomers.

 

Pack sizes available - 208L drums

Discover More +