Kernow Oils - Lubricant Solutions

Industrial

Total Valona MS 7023 - Chlorine-free neat cutting oil - 115757

Total Valona MS 7023 - Chlorine-free neat cutting oil for heavy duty machinings. - 115757

 

Applications:

  • Valona MS 7023 is a chlorine-free neat cutting oil dedicated to both ferrous and non-ferrous metals.
  • Valona MS 7023 is widely used on cutting operations on hard and very hard steels (bearing steels), on special, stainless and refractory steels (NIMONIC and Vaspalloy) and on titanium alloys (aviation and medical applications). It can also be used on low carbon steels and copper alloys.
  • Machinings lubricated : turning, screwcutting, milling, threading, tapping, sawing, deep drilling.

 

Advantages:

  • Very good antiwear and extreme pressure performances:

                 - increases the tool lifetime,
                 - prevents ridging,
                 - very good surface finish,
     (it contributes towards reducing production costs).

  • Very good behaviour on a large scale of cutting parameters.
  • Low treatment cost (swarf, diatomated earth, chip treatment).
  • Low mist oil formation which improves the work conditions.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Scilia MS 7046 - Chlorine-free neat cutting oil - 115779

Total Scilia MS 7046 - Chlorine-free neat cutting oil - 115779

 

Chlorine-free neat cutting oil for heavy duty machiningsand for machine tool lubrication.

 

Applications:

Scilia MS 7046 is a chlorine-free neat cutting oil dedicated to both ferrous and non-ferrous metals and to the lubrication of various machine parts: bearings, gears, sideways. Precautions to take on all lubrication machine circuits: it is mandatory to use new and fresh oil for topping up. Scilia MS 7046 is widely used on cutting operations on hard and very hard steels (bearing steels), on special, stainless and refractory steels (Nimonic and Vaspalloy) and on titanium alloys (aviation and medical applications). It can also be used on low carbon steels and copper alloys.
Machinings lubricated: turning, screwcutting, milling, horizontal broaching, threading, tapping.

 

Advantages:

  • Very good antiwear and extreme pressure performances:

                - increases the tool lifetime,
                - prevent ridging,
                - very good surface finish.
(contributes towards reducing production costs).

  • Avoids problems in case of lubrication oil leakages: Eliminates the risk of mixing and diluting the cutting oil with the oil from the crankcase.
  • Very good behaviour on a large scale of cutting parameters.
  • Low treatment cost (swarf, diatomated earth, chip treatment).
  • Low mist oil formation which improves the work conditions.

 

Pack sizes available - 208ltr drums

Discover More +
Total Spirit MS 5000 - Multipurpose chlorine-free micro-emulsion - 115810

Total Spirit MS 5000 - Multipurpose chlorine-free micro-emulsion - 115810

 

Applications:

  • Spirit MS 5000 is recommended in workshops handling many different machining operations and materials.
  • Particularly suitable for difficult machining processes.
  • Machining ferrous and non-ferrous metals.
  • Spirit MS 5000 gives very good results in plane, cylindrical or centerless grinding.
  • Recommended proportions:

                 - grinding : 4%
                 - moderate machining : 5 to 7%
                 - severe machining : 6 to 9%.

 

Specifications:

  • ISO 6743/7
  • ISO-L MAE

 

Advantages:

  • Excellent corrosion protection properties.
  • Very wide range of applications.
  • Excellent wetting and cooling capability.
  • Very easy to use: simply pour SPIRIT MS 5000 into good quality water.
  • Excellent stability over time increases drain intervals.
  • Non-foaming.
  • Good resistance to bacterial growth.

 

Pack sizes available - 208ltr drums

Discover More +
Total Specis CU - Anti-seize grease with copper - 124680

Total Specis CU - Anti-seize grease with copper - 124680

 

Applications:

  • For use when assembling components which are susceptible to corrosion or oxidation and are subsequently difficult to dismantle.
  • The grease is effective on any mechanism or component which is subject to corrosion such as those in contact with sea water and also in the mechanical brake linkages of vehicles.
  • The grease was developed for engine exhaust manifold nuts which frequently seize due to the high temperatures involved.

 

 

Specifications: 

  • ISO-L-X BGBB 1
  • DIN 51502 MPF1U -20

 

Advantages:

  • Will ease disassembly of threaded components in wet and humid environments, e.g. Bolts, nuts and brake linkages.
  • Can be used to prevent thread stripping on exhaust manifold nuts and other high temperature applications.
  • Water resistant

 

Pack sizes available - 12x1Kg, 18kg

Discover More +
Total Tifora PG - Grease - 133582

Total Tifora PG - Heavy metal free special high performance grease for tubing/casing. - 133582

 

Applications:

  • Tifora PG is an innovative heavy metal-free lubricating grease specifically developped for both protection and "make up" of ‘premium’ (casing/tubing) connections. Tifora PG has been specially designed for Carbon-Steel and 13Cr connections. It can be used in API and semi-premium connections.
  • It can be used to replace the heavy metal API dopes (traditionally leaded).
  • It may also be used for applications where good anti-seizure properties are required such as drilling in non-severe conditions (water,…).
  • If an anti-corrosion product is demanded, Tifora PG can be proposed as an alternative, and is particularly suited when in a environment exposed to salt spray, such as on offshore, marine and dockyard equipment (open gears,…).
  • Always avoid contamination of the grease by dust and/or dirt when applying. Please observe recommendations API RP 5C1 for handling and running.

 

Specifications:

  • Approved by: VALLOUREC and MANNESMANN tubes (TSLI 441), SUMITOMO.
  • Referenced TOTAL EP : ref GS EP FP 330.

 

Advantages:

  • Corrective coefficient of friction: 1 (similar to an API thread compound).
  • Long term protection with enhanced anti-corrosive properties.
  • Environmentally safe.
  • Storage stability even in hostile environments, (pipe yards, barges, etc...).
  • Clean and safe handling.
  • Easy application (by brush) and removal (solvent, degreaser) within a wide range of temperature.
  • Cost saving considering its light density (0,910) and subsequently lower consumption.
  • Safe and easy use for both rig staff and repair shop staff.
  • Grease without heavy metals (Zn, Cu, Pb) and powdered graphite.
  • Maintains its orginal consistancy without drying out.

 

Pack sizes available - 18kg

Discover More +
Total Tifora TJ - Grease - 145338

Total Tifora TJ - Grease - 145338

 

Aluminium complex grease for tool joint threads.

 

Applications:

  • Tifora TJ is specially formulated to grease tool joint threads.
  • Tifora TJ is primarily applied to the threading of oil drilling equipment.

Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or brush.

 

Specifications:

  • ISO 6743-9: L-XBGHB1
  • Complies with: API BUL 7A1

 

Advantages:

  • Contains a large amount of solid lubricants which help prevent metal thread seizure and marking when very high torsional stresses are developed during tightening.
  • Ensures proper sealing and forestalls any increase in capillary leakage, even when internal pressures are very high.
  • Adhers well to metal.
  • Very resistant to water wash-off.
  • Can be easily applied by brush.

 

Pack sizes available - 15kg

Discover More +
Total Vulsol MSF 7200 - Synthetic cutting fluid - 157664

Total Vulsol MSF 7200 - Synthetic cutting fluid - 157664

 

Applications:

  • Vulsol MSF 7200 is recommended for machining and grinding steel and its alloys as well as non ferrous metals.
  • Vulsol MSF 7200 is also designed for machining plastic materials as well as for machining and polishing special optical lenses.
  • Recommended rates of use:

                  - grinding: 3 - 4%
                  - machining: 4 - 7%

 

Specifications:

  • ISO 6743/7
  • ISO-L MAH

 

Advantages:

  • Vulsol MSF 7200 is very easy to use, simply by pouring it into good quality water.
  • Excellent cooling and lubricant power.
  • Efficient protection of machined parts and machines against corrosion.
  • Good mechanical performances, providing:

                   - Reduced cutting efforts
                   - Extended tool lifetime
                   - Very good surface finish to parts.

  • Properties in service:

                   - Excellent stability over time increases drain intervals;
                   - Cuttings have low rate of humidity;
                   - Good anti-foaming properties.

  • Resist to the development of bacteria and mould very well, so is more environmentally and operator friendly.
  • Very multifunctional.
  • Very good separation of tramp oils and settling of sludges.
  • Very good detergent power.

 

Pack sizes available - 208ltr drums

Discover More +
Total Spirit WBF 7200 - Metalworking - 157813

Total Spirit WBF 7200 - Metalworking - 157813

 

Micro-emulsion for difficult machining operations on a wide range of metals.

 

Applications:

  • Spirit WBF 7200 is specially designed for difficult and very difficult machining operations.
  • Spirit WBF 7200 is intended for machining ferrous and non ferrous metals, hard steels, steel alloys, stainless steels, titanium, aluminium and alloys.
  • Recommended rate of use:

               - heavy machining: 5 to 7%
               - very heavy machining: 7 to 10%.

 

Specifications:

  • ISO 6743/7
  • ISO-L MAF

 

Advantages:

  • Spirit WBF 7200 is very easy to use, simply by pouring it into good quality water.
  • Excellent cooling and lubricant power.
  • Efficient protection of machined parts and machines against corrosion.
  • Good mechanical performances, providing:

               - Reduced cutting efforts
               - Extended tool lifetime
               - Very good surface finish to parts.

  • Properties in service:

               - Excellent stability over time increases drain intervals;
               - Cuttings have low rate of humidity;
               - Good anti-foaming properties.

  • Resist to the development of bacteria and mould very well, so is more environmentally and operator friendly.
  • Very multifunctional.
  • Very difficult cutting operations.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Seriola 22 - Heat Transfer Oil - 157834

Total Seriola 22 - Heat Transfer Oil - 157834

 

Applications:

Indirect heating systems requiring a mineral oil transfer medium such as:

  • Production of steam and hot water
  • Heat exchanges
  • Autoclaves
  • Reactors
  • Ovens
  • Dry tunnels at temperatures of up to 200°C in closed systems

 

Advantages:

  • High viscosity Index allows wide range of application.
  • Good thermal stability.
  • High flash point.
  • Excellent resistance to oxidation leads to longer life at high temperatures.

 

Pack sizes available - 20ltr, 208ltr drums, bulk delivery

Discover More +
Total Seriola 2100 - Heat Transfer Oil - 157843

Total Seriola 2100 - Heat Transfer Oil - 157843

 

Applications:

Indirect heating systems requiring a mineral oil transfer medium such as:

  • Production of steam and hot water
  • Heat exchanges
  • Autoclaves
  • Reactors
  • Ovens
  • Dry tunnels at temperatures of up to 200°C in closed systems

 

Advantages:

  • High viscosity Index allows wide range of application.
  • Good thermal stability.
  • High flash point.
  • Excellent resistance to oxidation leads to longer life at high temperatures.

 

Pack sizes available - 20ltr, 208ltr drums, bulk delivery

Discover More +