Kernow Oils - Lubricant Solutions

Industrial

Total Drosera MS 32 - Machine Tool Oils - 110552

Total Drosera MS 32 - Machine Tool Oils - 110552

 

High performance multifunctional zinc free oils for machine tools.

 

Applications:

  • Machine tool slide ways under all conditions of speed and load (grades 68 to 320).
  • Hydraulic circuits for hydraulic pumps and motors (grades 32 and 46).
  • Gear boxes and feed mechanisms of all types with or without wet electro magnetic clutches (grades 68 to 320).
  • High speed machine spindles (grades 5, 10, 15 and 22 ) and very high speed (grade 2).
  • Hydrodynamic lubrication of mill roll stands during grinding (VG 460).
  • Particularly suitable for centralized lubrication systems.
  • One single comprehensive range of lubricating products for all parts of machine tools (hydraulics, slides, gears).
  • Simplification of storage and maintenance, cost reduction.
  • Viscosity grades 68 to 150 are also well suited to cold heading applications.

 

Specifications:

  • ISO 6743/2 : FD2 ; FD5 ; FD10 ; FD 22 ; FD 32
  • ISO 6743/4 : HG32 ; HG46
  • ISO 6743/13 : GA68 ; GA100 ; GA150 ; GA220 ; GA320 ; GA 460
  • DIN 51502 : CGLP46 ; CGLP68 ; CGLP100 ; CGLP150 ; CGLP220 ; CGLP320 ; CGLP 460
  • DIN51517 Part 3 , CLP 46 ; CLP 68 ; CLP 100 ; CLP 150 ; CLP 220 ; CLP 320 ; CLP 460
  • CINCINNATI MACHINE : P65-P62-P47-P50-P53-P45.

 

Advantages:

  • Excellent extreme-pressure properties
  • Excellent anti-stick-slip properties.
  • Strong stickiness grades 68 to 320.
  • Very low coefficient of friction.
  • Antioilmist properties.
  • High viscosity index.
  • Total compatibility with seals.
  • Low pour point.
  • Very good foaming resistance.
  • Very good oxidation resistance
  • Very good protection against rust
  • Very good anti-wear properties.
  • Good filterability.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Equivis ZS 15 - Hydraulic Oils - 110568

Total Equivis ZS 15 - Hydraulic Oils - 110568

 

High viscosity index anti-wear hydraulic oils.

 

Applications:

The Equivis ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points). Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside. Provides easy start up at low temperature (-30°C) and regular operating in all seasons for civil engineering, agriculture, marine, transport and other industrial applications.

 

Specifications:

  • AFNOR NF E 48-603 HV
  • ISO 6743/4 HV
  • DIN 51524 P3 HVLP
  • CINCINNATI MILACRON P68, P69, P70
  • VICKERS M-2950S, -I-286

 

Advantages:

  • Very high viscosity index
  • Good shear stability.
  • Superior thermal stability avoiding the formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • High protection against wear insuring maximum equipment life.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Remarkable filterability even in the presence of water.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Very low pour point.
  • Good demulsibility ensuring rapid water separation.

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Equivis ZS 32 - Hydraulic Oils - 110570

Total Equivis ZS 32 - Hydraulic Oils - 110570

 

High viscosity index anti-wear hydraulic oils.

 

Applications:

The Equivis ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points). Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside. Provides easy start up at low temperature (-30°C) and regular operating in all seasons for civil engineering, agriculture, marine, transport and other industrial applications.

 

Specifications:

  • AFNOR NF E 48-603 HV
  • ISO 6743/4 HV
  • DIN 51524 P3 HVLP
  • CINCINNATI MILACRON P68, P69, P70
  • VICKERS M-2950S, -I-286

 

Advantages:

  • Very high viscosity index
  • Good shear stability.
  • Superior thermal stability avoiding the formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • High protection against wear insuring maximum equipment life.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Remarkable filterability even in the presence of water.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Very low pour point.
  • Good demulsibility ensuring rapid water separation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Equivis ZS 46 - Hydraulic Oils - 110573

Total Equivis ZS 46 - Hydraulic Oils - 110573

 

High viscosity index anti-wear hydraulic oils.

 

Applications:

The Equivis ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points). Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside. Provides easy start up at low temperature (-30°C) and regular operating in all seasons for civil engineering, agriculture, marine, transport and other industrial applications.

 

Specifications:

  • AFNOR NF E 48-603 HV
  • ISO 6743/4 HV
  • DIN 51524 P3 HVLP
  • CINCINNATI MILACRON P68, P69, P70
  • VICKERS M-2950S, -I-286

 

Advantages:

  • Very high viscosity index
  • Good shear stability.
  • Superior thermal stability avoiding the formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • High protection against wear insuring maximum equipment life.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Remarkable filterability even in the presence of water.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Very low pour point.
  • Good demulsibility ensuring rapid water separation.

 

Pack sizes available - 3x5L, 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Equivis ZS 68 - Hydraulic Oils - 110576

Total Equivis ZS 68 - Hydraulic Oils - 110576

 

High viscosity index anti-wear hydraulic oils.

 

Applications:

The Equivis ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points). Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside. Provides easy start up at low temperature (-30°C) and regular operating in all seasons for civil engineering, agriculture, marine, transport and other industrial applications.

 

Specifications:

  • AFNOR NF E 48-603 HV
  • ISO 6743/4 HV
  • DIN 51524 P3 HVLP
  • CINCINNATI MILACRON P68, P69, P70
  • VICKERS M-2950S, -I-286

 

Advantages:

  • Very high viscosity index
  • Good shear stability.
  • Superior thermal stability avoiding the formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • High protection against wear insuring maximum equipment life.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Remarkable filterability even in the presence of water.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Very low pour point.
  • Good demulsibility ensuring rapid water separation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Ceran WR 2 - Grease - 111562

Total Ceran WR 2 - Grease - 111562

 

Extreme pressure water resistant high temperature calcium sulfonate complex grease.

 

Applications:

CERAN WR 2 is a multi purpose extreme pressure grease, formulated for the lubrication of all kinds of industrial, marine and off shore applications, operating under the most severe conditions. (water,heat, dust and other pollution). CERAN WR 2 is also suitable as EP multi purpose grease, in “off road” applications where water is in frequent contact with the grease. Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

 

Specifications:

  • Performances meet all Voith VN 108 requirements (soap is not lithium but calcium sulfonate complex).
  • ISO 6743-9: L-XBFIB 2
  • DIN 51 502: KP2R -25
  • Marine standard STM 310A (NATO G 460)

 

Advantages:

  • Thanks to its very sophisticated formula and performance reserves, CERAN WR 2 meets the most stringent industrial requirements.Its range of applications is extensive, as a result it can replace and outclass numerous conventional greases.
  • Excellent thermal stability. It regains its original texture after cooling to ambient temperature.
  • Remarkable load resistance thanks to its naturally high extreme pressure and anti-wear properties.
  • Extraordinary water resistance, no significant loss of consistency is observed even with high amounts of water entering the grease.
  • Excellent anti-oxidation and anti-corrosion properties thanks to the very nature of the calcium sulfonates, also in the presence of sea water.
  • CERAN WR 2 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 24x425g, 18kg, 50kg, 180kg, bulk delivery

Discover More +
Total Cirkan C 100 - Lubrication - 111679

Total Cirkan C 100 - Lubrication - 111679

 

High quality oils for moving parts.

 

Applications:

CIRKAN C oils are pure mineral oils with appropriate viscosities for loss lubrication of:
- moving parts
- swivels
- journals
- chains

 

 

Specifications: 

  • ISO 11158 Category HH
  • ISO 6743/4 Category HH

 

Advantages:

  • High natural viscosity index
  • Compatible with seals
  • High ignition point
  • Benefits from advanced refining: almost transparent in appearance.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Kassilla GMP 320 - Lubrication - 112211

Total Kassilla GMP 320 - Lubrication - 112211

 

Mineral oil with solid lubricants for enclosed gears.

 

Applications:

KASSILLA GMP has been specially formulated for lubricating enclosed gears operating under heavy and with shocks loads:

  • bevel and spur gears
  • bearings and gear couplings
  • worm gears

KASSILLA GMP is particularly recommended for use in the iron and steel, cementmaking, papermaking, mining, quarrying and similar industries.

 

Specifications:

  • DIN 51517 Part 3 Group CLP
  • API GL4
  • ISO 6743-6 Category CKE

Manufacturers - CINCINNATI MILACRON

 

Advantages:

  • Very high anti-wear and extreme-pressure properties due to the presence of graphite and molybdenum disulphide: better oil film resistance ensuring greater protection for heavily loaded gears exposed to substantial shocks and against wear due to “micropitting”.
  • Very high oxidation resistance: longer oil bath life.
  • Lower energy consumption.

 

Pack sizes available - 208L drums

Discover More +
Total Azolla ZS 10 - Hydraulic oil - 112332

Total Azolla ZS 10 - Hydraulic oil - 112332

 

Very high performance anti-wear hydraulic oils.

 

Applications:

Designed for use in all kind of hydraulic sytems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment. Also used in many other applications, where an universal high performance anti-wear lubricant is the first choice : low charged gears, sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.

 

Specifications:

AFNOR NF E 48-603 HM
ISO 6743/4 HM
DIN 51524 P2 HLP
CINCINNATI MILACRON P68, P69, P70
VICKERS M-2950S, -I-286
DENISON HF0, HF1, HF2 (T6H20C)

 

Advantages:

  • High protection against wear insuring maximum equipment life.
  • Superior thermal stability avoiding formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • Remarkable filterability even in the presence of water.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Good demulsibility ensuring rapid water separation
  • Reduced maintenance and operating costs.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Equivis ZS 100 - Hydraulic Oils - 112339

Total Equivis ZS 100 - Hydraulic Oils - 112339

 

High viscosity index anti-wear hydraulic oils.

 

Applications:

The Equivis ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points). Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside. Provides easy start up at low temperature (-30°C) and regular operating in all seasons for civil engineering, agriculture, marine, transport and other industrial applications.

 

Specifications:

  • AFNOR NF E 48-603 HV
  • ISO 6743/4 HV
  • DIN 51524 P3 HVLP
  • CINCINNATI MILACRON P68, P69, P70
  • VICKERS M-2950S, -I-286

 

Advantages:

  • Very high viscosity index
  • Good shear stability.
  • Superior thermal stability avoiding the formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • High protection against wear insuring maximum equipment life.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Remarkable filterability even in the presence of water.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Very low pour point.
  • Good demulsibility ensuring rapid water separation.

 

Pack sizes available - 20L, 208L drums

Discover More +