Kernow Oils - Lubricant Solutions

Industrial

Total Planetelf ACD 100 FY - Compressor Oil - 112608

Total Planetelf ACD 100 FY - Compressor Oil - 112608

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Preslia SE JET - Synthetic oil for aeroderivatives turbines - 112610

Total Preslia SE JET - Synthetic oil for aeroderivatives turbines - 112610

 

Applications:

Lubrication and regulation of extremely high-performance aeroderivatives turbines.

 

Specifications:

Preslia SE JET is approved according to the following international standards on turbines manufacturers:
- MIL-PRF-23699F
- ALLISON ROLLS ROYCE (USA)
- GENERAL ELECTRIC
- ROLLS ROYCE (UK)
- TURBOMECA

 

 

Advantages: 

Preslia SE JET owns all the properties required to ensure the lubrication of the aeroderivative turbines working in the most difficult conditions:

  • Very high viscosity index
  • Excellent ability to withsand high temperatures
  • Excellent anti-oxidant capability
  • Excellent ability to withstand low temperatures
  • Very high anti-corrosion anti-foaming properties.

 

Pack sizes available - 208ltr drums

Discover More +
Total Planetelf ACD 32 - Compressor Oil - 112622

Total Planetelf ACD 32 - Compressor Oil - 112622

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +
Total Planetelf ACD 46 - Compressor Oil - 112623

Total Planetelf ACD 46 - Compressor Oil - 112623

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +
Total Planetelf ACD 68 - Compressor Oil - 112624

Total Planetelf ACD 68 - Compressor Oil - 112624

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +
Total Osyris DWX 3000 - Metalworking - 115840

Total Osyris DWX 3000 - Metalworking - 115840

 

Applications:

Fluidised protection fluid with superior water displacement capability.
Osyris DWX 3000 is a water-repellent fluid that effectively eliminates all traces of water from metal surfaces. Coating the surface with a thin film to give medium-term protection.
Osyris DWX 3000 complies with Standard ISO 6743/8 (1987) : REE category.

Osyris DWX 3000 may be applied:

  • with a brush,
  • by spraying,
  • by immersion.

The film may be eliminated by:

  • diluted alkaline detergents,
  • solvents (liquid or vapour phase),
  • mechanical action.

 

Advantages:

  • Osyris DWX 3000 widely recommended for use throughout the metal rocessing industry or in electroplating applications for temporary storage.
  • Very good water-repellent capability.
  • Osyris DWX 3000 deposits a thin layer of a soft, non-drying, protective film.
  • Provides protection for six months during indoor storage and two months during outdoor, sheltered storage.
  • Rapid solvent evaporation.
  • Good resistance to humid air.

 

Pack sizes available - 19ltrs

Discover More +
Total Osyris DWX 5000 - Metalworking - 115843

Total Osyris DWX 5000 - Metalworking - 115843

 

Applications:

  • Osyris DWX 5000 is a water-repellent protective fluid, leaving an oily film on parts, providing medium-term protection.
  • Osyris DWX 5000 satisfies ISO standard 6743/8 (1987): category REE.
  • Temporary storage in the mechanical engineering industry.
  • Protection following surface treatment.

 

Advantages:

  • Very high water-repellent capability.
  • Medium protection from 8 to 10 months indoors and 3 months outdoors.
  • Osyris DWX 5000 is easily applied by soaking, spraying or with a brush owing to its high fluidity. The protective film can be removed using alkaline detergents or by solvents in the liquid or vapour phase.

 

Pack sizes available - 19ltrs

Discover More +
Total Planetelf ACD 150 FY - Compressor Oil - 125883

Total Planetelf ACD 150 FY - Compressor Oil - 125883

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +

Total Planetelf ACD 220 FY - Compressor Oil - 125884

 

Synthetic polyolester oils for refrigerating compressors using HFC refrigerants.

 

Applications:

  • Compatible with all kinds of HFC refrigerants: R134a, R404A, R407C, R410A, R507, R23…
  • Planetelf ACD 32, 46 and 68 are suitable for piston compressors.
  • Planetelf ACD 68, 100FY, 150FY and 220FY are suitable for rotary compressors (screw or centrifugal).

 

Specifications:

International Specification - ISO 6743-3: DRD
OEM's: AERZEN, BOCK, FRASCOLD, GRAM, GRASSO, HOWDEN, MCQUAY, SABROE, SULZER, YORK.

 

Advantages:

  • ASHRAE thermal stability tests confirm the excellent behavior of the lubricant at high temperature in presence of refrigerant, water and metallic components.
  • Neutral behaviour with the refrigerating equipments (Anti-rust, anti-corrosion properties with copper metals, compatibility with varnishes, elastomers and paints, high resistance to hydrolysis)
  • Low dilution of refrigerant in oil for the high viscosity grades (Planetelf ACD FY range), for good lubricity and oil separation properties (low carry-over)
  • The good miscibility of the fluid viscosities of Planetelf ACD allows a good oil return property, specially in dry-ex equipments.

 

Pack sizes available - 20ltr

Discover More +
Total Nevastane Silicone Safegard - Multipurpose Silicone Oil - 127665

Total Nevastane Silicone Safegard - Multipurpose Silicone Oil, suitable for incidental food contact. - 127665

 

Multipurpose Silicone Oil, suitable for incidental food contact. In aerosol (207 ml net) with Safegard Spray System.

 

Applications:

  • Nevastane Silicone Safegard contains a high viscosity silicone oil with excellent stability to provide maximum lubrication.
  • Nevastane Silicone Safegard is multipurpose with a wide operating temperature range (-40°C to +200°C): small machines and chains subject to extreme temperatures, shrink oven chains, conveyors and rails…
  • Nevastane Silicone Safegard is recommended for the lubrication of numerous applications in food processing industries.

 

Specifications:

  • The formulation of Nevastane Silicone Safegard complies with the FDA, 21 CFR, 178.3570.
  • Nevastane Silicone Safegard is NSF H1 registered: No 123529.
  • Nevastane Silicone Safegard is Kosher certified.
  • Nevastane Silicone Safegard is a biostable product, it does not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane silicone safegard is recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Very good insulating, anti-rust and anti-corrosion properties.
  • Very wide temperature range.
  • Safegard technology - spray without propellant gas: environmentally friendly.
  • Can be sprayed upside down.

 

Pack sizes available - 12x216ml

Discover More +