Kernow Oils - Lubricant Solutions

Industrial

Total Martol EP 100 CF - Stamping oil - 167671

Total Martol EP 100 CF - Stamping oil - 167671

 

Applications:

  • Cutting, stamping, extrusion and drawing of low-to medium-carbon steels.
  • This product is particularly well-suited to materials that must not be in contact with chlorinated products.

 

Advantages:

  • Doped fluid mineral oil free of any chlorinated additives.
  • Excellent spreading of the oil film.
  • Good stamping and drawing capacity.
  • The originality of the formulation takes into account the improvement in the operative conditions thus ensuring additional comfort to users.
  • The oiliness, anti-wear and extreme-pressure dopings provide better tool resistance and a very good surface state, which elements contribute to a reduction in production costs.
  • Elimination: degreasing by the usual solvents and hot alkaline lyes.
  • The need to protect the environment together with the demand on the part of certain industries have led us to formulate chlorine-free products.
  • This oil achieves performances wholly comparable to those obtained with chlorinated products while at the same time offering the advantage of not causing pollution and of being able to be eliminated at least cost.

 

Pack sizes available - 208L drums

Discover More +
Total MEP Chainsaw Oil - 167839

Total MEP Chainsaw Oil - 167839

 

Applications:

  • Lubricating cutter bar of chainsaws.

 

Advantages:

  • Anti fling formulation.
  • Deep penetration of links.
  • Economical in use.
  • Approved by all major chain manufacturers.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Nateria MP 40 - Gas engine oil - 174096

Total Nateria MP 40 - Gas engine oil - 174096

 

New generation low ash lubricant, specifically developed to extend oil drain interval, and to protect natural gas engines.

 

Applications:

  • Lubrication of engines in power generation plants, with or without cogeneration, when the manufacturer requires an oil ash content up to 0.5%.
  • Developed for the most severe conditions: fast engines, high temperatures, small oil sump capacity.

 

Specifications:

NATERIA MP 40 performances are recognised by all major manufacturers who tested it successfully in real conditions:

  • MWM
  • Rolls-Royce
  • Meets the requirements, among others, of GE-Jenbacher and Wärtsilä.

 

Advantages:

  • Increases significantly oil drain interval, lowering the number of engine stops and the running cost.
  • Very low deposits-forming ensuring an excellent cleanliness of hot engine parts.
  • High anti-wear properties for an optimal protection of the most stressed parts.

 

Pack sizes available - 208L drums

Discover More +
Total Drosera MS 2 - Machine Tool Oils - 176747

Total Drosera MS 2 - Machine Tool Oils - 176747

 

High performance multifunctional zinc free oils for machine tools.

 

Applications:

  • Machine tool slide ways under all conditions of speed and load (grades 68 to 320).
  • Hydraulic circuits for hydraulic pumps and motors (grades 32 and 46).
  • Gear boxes and feed mechanisms of all types with or without wet electro magnetic clutches (grades 68 to 320).
  • High speed machine spindles (grades 5, 10, 15 and 22 ) and very high speed (grade 2).
  • Hydrodynamic lubrication of mill roll stands during grinding (VG 460).
  • Particularly suitable for centralized lubrication systems.
  • One single comprehensive range of lubricating products for all parts of machine tools (hydraulics, slides, gears).
  • Simplification of storage and maintenance, cost reduction.
  • Viscosity grades 68 to 150 are also well suited to cold heading applications.

 

Specifications:

  • ISO 6743/2 : FD2 ; FD5 ; FD10 ; FD 22 ; FD 32
  • ISO 6743/4 : HG32 ; HG46
  • ISO 6743/13 : GA68 ; GA100 ; GA150 ; GA220 ; GA320 ; GA 460
  • DIN 51502 : CGLP46 ; CGLP68 ; CGLP100 ; CGLP150 ; CGLP220 ; CGLP320 ; CGLP 460
  • DIN51517 Part 3 , CLP 46 ; CLP 68 ; CLP 100 ; CLP 150 ; CLP 220 ; CLP 320 ; CLP 460
  • CINCINNATI MACHINE : P65-P62-P47-P50-P53-P45.

 

Advantages:

  • Excellent extreme-pressure properties
  • Excellent anti-stick-slip properties.
  • Strong stickiness grades 68 to 320.
  • Very low coefficient of friction.
  • Antioilmist properties.
  • High viscosity index.
  • Total compatibility with seals.
  • Low pour point.
  • Very good foaming resistance.
  • Very good oxidation resistance
  • Very good protection against rust
  • Very good anti-wear properties.
  • Good filterability.

 

Pack sizes available - 208L drums

Discover More +
Total Ceran XM 220 - Grease - 179302

Total Ceran XM 220 - Grease - 179302

 

Extreme-pressure water resistant high temperature “NEW GENERATION” calcium sulfonate complex grease.

 

Application:

CERAN XM 220 is made of the NEW GENERATION calcium sulfonate complex soap designed by TOTAL Lubrifiants. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, anticorrosion properties while keeping a very high level of pumpability and ability to lubricate well in case of high speeds. CERAN XM 220 is suitable for the lubrication of all kinds of components subject to high loads, shocks, working in conditions where the grease is in frequent contact with water (even sea water due to enhanced antirust performances). CERAN XM 220 is suitable for the lubrication of continuous castings and rolling mills in steel plants, bearings in wet and dry (felt rolls) sections of paper mills and all industrial applications under severe conditions (wet, loaded, high temperature, dust,…). CERAN XM 220 is suitable for use in centralized greasing systems. Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

 

Specifications:

  • ISO 6743-9: L-XBFIB 1/2
  • DIN 51 502: KP1/2R -30

 

Advantages:

  • The NEW GENERATION of calcium sulfonate complex soap developed by TOTAL Lubrifiants allows CERAN XM 220 to work well in bearings even if rotation speeds are high. CERAN XM 220 presents outstanding performances even at high nDm where the NEW GENERATION keeps all benefits in terms of corrosion protection, bearings lifetime, high loads and thermal resistance.
  • Excellent anti-oxidation and anti-corrosion properties thanks to the excellent behaviour of the calcium sulfonates, also in the presence of sea water.
  • The NEW GENERATION of calcium sulfonate complex soap allows to keep outstanding CERAN XM 220 performances even in case of high speed applications where normally polyurea or lithium complex greases are requested.
  • CERAN XM 220 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 24x425g cartridges, 24x400g lube shuttles, 50kg

Discover More +
Total Bioadhesive Plus - Biodegradable calcium grease - 180921

Total Bioadhesive Plus - Biodegradable calcium grease - 180921

 

Biodegradable calcium grease. Excellent adhesiveness and water resistance.

 

Applications:

  • BIOADHESIVE PLUS is especially designed for the protection of metallic pieces in presence of water (including sea water).
  • BIOADHESIVE PLUS is used in marine applications and dam for lubrication and protection on slide rails, metal cables, wire ropes, winches, chains…
  • BIOADHESIVE PLUS is adapted for the static protection of spare parts.
  • BIOADHESIVE PLUS is suitable for loss lubrication in environmental sensitive areas.
  • BIOADHESIVE PLUS can be applied by hand with a brush or other adapted tool. For optimal lubrication and performances, keep the applying tools as clean as possible.

 

Specifications:

ISO 6743-9: L-XBBIA 1
DIN 51502: ME1E-20

 

Advantages:

  • BIOADHESIVE PLUS is insoluble in water, leading to a remarkable resistance to water wash-out.
  • BIOADHESIVE PLUS has excellent anti-corrosion properties even in the presence of sea water.
  • BIOADHESIVE PLUS has very good adhesion on metallic pieces in general.
  • BIOADHESIVE PLUS does not contain lead or other heavy metals considered as harmful to human health and to the environment.
  • BIOADHESIVE PLUS is an ultimately biodegradable grease (>60% according to OECD 301B test).

 

Pack sizes available - 18kg

Discover More +
Total Chainlub Aerosol - Spray - 183658

Total Chainlub Aerosol - Spray - 183658

 

Lubricant for chains, cables and different mechanisms.

 

Applications:

  • Lubrication of chain from industrial devices in textil or printing industries or in forklift trucks.
  • Winch, crane and brake cables lubrication.
  • Joint and various mechanisms : locks, hinges, wipers bearings, dynamos, alternators, domestic devices…
  • Hard to reach applications.

 

Advantages: 

  • Strong stickiness thanks to dedicated additives.
  • High penetrating power.
  • Good oxidantion resistance.
  • Anticorrosion properties improved.

 

Pack sizes available - 4x435g

Discover More +
Total Moldol VOC Free - Concrete Mould Release Oil - 188919

Total Moldol VOC Free - Concrete Mould Release Oil - 188919

 

Applications:

Emission friendly, low viscosity mould release oil for concrete, concrete roof tiles, bricks and railway sleepers.

 

Specifications:

  • Contains a VOC Free solvent.

  

Advantages:  

  • Can be sprayed or applied by swab or brush.
  • Suitable for new wood surfaces on the mould.
  • Gives good surface coverage and good surface finish.

 

Pack sizes available - 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Hydransafe HFAE 3 - Water-emulsifying hydraulic fluid - 190330

Total Hydransafe HFAE 3 - Water-emulsifying hydraulic fluid - 190330

 

Water-emulsifying hydraulic fluid concentrate without formaldehyde.

 

Applications:

  • HYDRANSAFE HFAE is a water emulsifying hydraulic fluid concentrate.
  • HYDRANSAFE HFAE is dedicated to the lubrication of hydraulic circuits when for safety reasons fire resistant HFA type fluids are required (furnaces, mould injection machines, continuous casting units, mines, steel mills, foundries…).
  • Recommended proportions : 3 to 5% in a soft water (TH < 10°F).
  • Operating temperature range : + 5 to + 55°C.

 

Specifications:

  • ISO 6743/4 - HFAE
  • ISO 12922

 

Advantages:

  • Very easy implementation by pouring HYDRANSAFE HFAE into a good quality water.
  • Forms with water a very stable milky emulsion. Excellent stability over time.
  • Good antiwear properties.
  • Excellent anti foam properties.
  • Good anti-corrosion, anti-rust properties even with a soft water.
  • Good resistance to bacterial growth.

 

Pack size available - 208L drums

Discover More +
Total DEM BC - Concrete Mould Release Oil - 308273

Total DEM BC - Concrete Mould Release Oil - 308273

 

Concrete mould release oil used on plastic and large steel moulds.

 

Applications:

Concrete mould oil for decorative concrete for beams and floor slabs , where the surface finish is part of the architectural feature.

 

Advantages:

  • Good release in steel moulds particularly when concrete is left to react in the moulds.
  • Easily applied by brush or spray.
  • High flash point.

 

Pack sizes available - bulk delivery

Discover More +