Kernow Oils - Lubricant Solutions

Industrial

Total Dacnis 150 - Compressor Oil - 162126

Total Dacnis 150 - Compressor Oil - 162126

 

Mineral oils for rotary and reciprocating air compressors.

 

Applications:

  • Mineral oils with specific high performance additives designed to lubricate screw and reciprocating air compressors:

                - For screw compressors - DACNIS 32, 46, or 68
                - For reciprocating compressors - DACNIS 68, 100 or 150.

  • For use in conditions where the discharge temperature does not exceed 100°C, otherwise, the use of synthetic oils is preferred.

 

Specifications:

  • ISO 6743-3 classified DAG & DAB for heavy duty applications.
  • DIN 51 506 VD-L for the use of DACNIS 100 & 150 in reciprocating air compressors.
  • Depending on the viscosity grades, DACNIS meet the requirements of: BAUER, CIRRUS, COMPAIR, DRESSER RAND, NEUENHAUSER, SAUER & SOHN, SULZER BURCKHARDT, TANABE…

 

Advantages:

  • The properties of DACNIS:

                     - avoid the carbon build up
                     - allow a good oil/air and oil/condensates separation
                     - protect components against wear and corrosion.

  • The use of DACNIS allows real cuts in the operating costs of the compressed air production facility by optimising the compressor efficiency.
  • Extending the service life of the separating filter elements. The DACNIS oils have an anticlogging property that ensures the efficiency of the filters during a long period.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Biohydran TMP 32 - Hydraulic oil - 163320

Total Biohydran TMP 32 - Hydraulic oil - 163320

 

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

 

Applications:

BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with re-enforced anti-wear properties. BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc…

 

Specifications:

  • ISO 15380: HEES
  • Registration number : FR / 27 / 02 AFNOR CERTIFICATION.

Reduced harm for water and soil during use. Reduced CO2 emissions.
For more information on the European Ecolabel, please consult: http://ec.europa.eu/environment/ecolabel/

 

Advantages:

  • Produced with renewable raw materials, BIOHYDRAN TMP contributes to CO2-emission reduction.
  • High natural viscosity index gives BIOHYDRAN TMP a wide temperature operating window (-20°C to 80°C).
  • The very high shear stability of BIOHYDRAN TMP will ensure the hydraulic equipment is kept to an optimum efficiency during the fluid service life.
  • The good lubricating properties, as well as the very good wear and corrosion protection, will extend the life of the hydraulic system’s moving components.

 

Pack sizes available - 208L drums

Discover More +
Total Biohydran TMP 46 - Hydraulic oil - 163330

Total Biohydran TMP 46 - Hydraulic oil - 163330

 

Biodegradable Hydraulic Fluid complying with the European Ecolabel criteria.

 

Applications:

BIOHYDRAN TMP is a biodagradable synthetic hydraulic fluid offering good lubricating properties. It was designed for demanding hydraulic systems requiring hydraulic fluids with re-enforced anti-wear properties. BIOHYDRAN TMP is recommended for use when incidental spillage in environmentally sensitive areas can occur, eg : forestry works, navigation, off-shore, water catchment areas, ski resorts, hydroelectric stations etc…

 

Specifications:

  • ISO 15380: HEES
  • Registration number : FR / 27 / 02 AFNOR CERTIFICATION.

Reduced harm for water and soil during use. Reduced CO2 emissions.
For more information on the European Ecolabel, please consult: http://ec.europa.eu/environment/ecolabel/

 

Advantages:

  • Produced with renewable raw materials, BIOHYDRAN TMP contributes to CO2-emission reduction.
  • High natural viscosity index gives BIOHYDRAN TMP a wide temperature operating window (-20°C to 80°C).
  • The very high shear stability of BIOHYDRAN TMP will ensure the hydraulic equipment is kept to an optimum efficiency during the fluid service life.
  • The good lubricating properties, as well as the very good wear and corrosion protection, will extend the life of the hydraulic system’s moving components.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Biohydran SE 32 - High thermal stability biodegradable hydraulic fluid - 1

Total Biohydran SE 32 - High thermal stability biodegradable hydraulic fluid - 163337

 

High thermal stability biodegradable hydraulic fluid.

 

Applications:

  • Based on saturated synthetic esters BIOHYDRAN SE is designed for demanding hydraulic systems requiring hydraulic fluids with a high thermal stability and good lubricating properties.
  • The excellent biodegradability and low eco toxicity make BIOHYDRAN SE particularly suitable when incidental spillages in environmentally sensitive areas can occur : forestry works, public works, water navigation, off-shore, water catchments areas, ski resorts, etc…

 

Specifications:

  • ISO 15380 : HEES
  • DENISON : HF1, HF2 & HF6 approved
  • Registration number : FR/27/02 AFNOR CERTIFICATION. Reduced harm for water and soil during use. Reduced CO2 emissions. For more information on the European Ecolabel, please consult: http://ec.europa.eu/environment/ecolabel/
  • Meet the requirements of the Swedish Standard SS 15 54 34.

 

Advantages:

  • BIOHYDRAN SE has a natural high and stable viscosity index. No viscosity loss due to shear is observed. This stable viscosity level ensures an optimum hydraulic efficiency during all the fluid life.
  • The good lubricating properties and corrosion protection will extend the component life of hydraulic systems.
  • The excellent oxidation stability of BIOHYDRAN SE offers extended drain intervals compared to classical mineral hydraulic fluids.
  • The very low foaming tendency and fast air release limit air contamination in the circuit.
  • BIOHYDRAN SE is miscible with classical HM and HV mineral hydraulic fluids.

 

Precautions:

  • It is recommended to check with the equipment supplier to see whether the installation is suitable for the use of synthetic ester based hydraulic fluids. BIOHYDRAN SE has a good compatibility level with NBR, HNBR, AU and FPM seals.
  • Contact TOTAL technical services for advice changing from HM or HV fluids to BIOHYDRAN SE.

 

Pack sizes available - 20L

Discover More +
Total Biohydran SE 46 - High thermal stability biodegradable hydraulic fluid - 1

Total Biohydran SE 46 - High thermal stability biodegradable hydraulic fluid - 163338

 

High thermal stability biodegradable hydraulic fluid.

 

Applications:

  • Based on saturated synthetic esters BIOHYDRAN SE is designed for demanding hydraulic systems requiring hydraulic fluids with a high thermal stability and good lubricating properties.
  • The excellent biodegradability and low eco toxicity make BIOHYDRAN SE particularly suitable when incidental spillages in environmentally sensitive areas can occur : forestry works, public works, water navigation, off-shore, water catchments areas, ski resorts, etc…

 

Specifications:

  • ISO 15380 : HEES
  • DENISON : HF1, HF2 & HF6 approved
  • Registration number : FR/27/02 AFNOR CERTIFICATION. Reduced harm for water and soil during use. Reduced CO2 emissions. For more information on the European Ecolabel, please consult: http://ec.europa.eu/environment/ecolabel/
  • Meet the requirements of the Swedish Standard SS 15 54 34.

 

Advantages:

  • BIOHYDRAN SE has a natural high and stable viscosity index. No viscosity loss due to shear is observed. This stable viscosity level ensures an optimum hydraulic efficiency during all the fluid life.
  • The good lubricating properties and corrosion protection will extend the component life of hydraulic systems.
  • The excellent oxidation stability of BIOHYDRAN SE offers extended drain intervals compared to classical mineral hydraulic fluids.
  • The very low foaming tendency and fast air release limit air contamination in the circuit.
  • BIOHYDRAN SE is miscible with classical HM and HV mineral hydraulic fluids.

 

Precautions:

  • It is recommended to check with the equipment supplier to see whether the installation is suitable for the use of synthetic ester based hydraulic fluids. BIOHYDRAN SE has a good compatibility level with NBR, HNBR, AU and FPM seals.
  • Contact TOTAL technical services for advice changing from HM or HV fluids to BIOHYDRAN SE.

 

Pack sizes available - 208L drums

Discover More +
Total Nevastane Grease Aerosol - Water Resistant Grease - 164120

Total Nevastane Grease Aerosol - Water Resistant Grease - 164120

 

Water resistant Grease for incidental food contact. In aerosol 405 ml (300 ml net).

 

Applications:

  • NEVASTANE GREASE AEROSOL is a very adhesive and translucent Aluminium Complex grease.
  • NEVASTANE GREASE AEROSOL can be used for multi-purpose applications based on its wide operating temperature range (-20°C to +150°C).
  • NEVASTANE GREASE AEROSOL is recommended for the lubrication of applications operating under the most severe conditions encountered in food processing industries - bearings, hinges, springs, chains, rails and tools.

 

Specifications:

  • The formulation of NEVASTANE GREASE AEROSOL complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE GREASE AEROSOL is NSF H1 registered: No 141724.
  • NEVASTANE GREASE AEROSOL is recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.

 

Advantages:

  • Excellent resistance to water and steam.
  • Exceptional adhesion on metal surfaces.
  • Insensitive to detergents.
  • Odour-free and colourless grease.
  • Reduces friction between plastic and metal pieces.
  • Provides good corrosion protection.
  • Delivers a powerful and precise spray pattern thanks to the mini-jet diffuser of the aerosol.

 

Pack sizes available - 12x300ml

Discover More +
Total Merkan 23 - Water resistant calcium grease - 164669

Total Merkan 23 - Water resistant calcium grease - 164669

 

Applications:

  • MERKAN 23 is pre-eminently designed for the lubrication of slow rotating slide bearings and articulations used in marine applications such as stern tubes, and ‘industrial’ applications such as conveyor belts.
  • MERKAN 23 is also suitable as a non “EP” general purpose grease in a wide range of ‘outdoor’ applications where water is in frequent contact with the grease.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

 

Specifications:

  • ISO 6743-9: L-XBAHA 2/3
  • DIN 51502 : M2/3C-20

 

Advantages:

  • MERKAN 23 is insoluble in water, leading to a remarkable resistance to water washout.
  • Because of the smooth and fluid structure MERKAN 23 is easily pumpable and therefore suitable for centralised lubrication systems.
  • MERKAN 23 contains no lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 10kg

Discover More +
Total Agritraite 68 - Milking machine vacuum pumps oil - 164800

Total Agritraite 68 - Milking machine vacuum pumps oil - 164800

 

Applications:

Lubrication of specific vacuum pumps used in milking machines:
• Vane pumps.
• Screw pumps.
• Roots pumps.

 

Performance:

  • No shear.
  • Very good anti-wear properties.
  • Anti-corrosion, anti-rust, anti-foam properties.
  • No air retention.
  • Excellent desemulsibility.
  • Very good seal compatibility.

 

Pack sizes available - 3x5L

Discover More +
Total Multis Complex SHD 00 - Lithium complex, Extreme-pressure grease - 165886

Total Multis Complex SHD 00 - Lithium complex, Extreme-pressure grease - 165886

 

Synthetic high-performance lithium complex, Extreme-pressure grease.

 

Applications:

  • MULTIS COMPLEX SHD 00 is a very high performance synthetic grease recommended for the lubrication of industrial applications under heavy loads and high temperature. More specially suitable in case lithium soap or conventional complex lithium soap do not provide sufficient lubricant life.
  • MULTIS COMPLEX SHD 00 is a grease offering excellent protection for bearings working under high loads and slow to moderate rotational speeds. Is suitable under wet conditions. Could be used in case of plastic contacts.
  • MULTIS COMPLEX SHD 00 is a grease which helps to reduce friction between metal and which is suitable in case of low temperature.
  • MULTIS COMPLEX SHD 00 is recommended for temperatures between -50°C and +160°C.

 

Specifications:

  • ISO 6743-9: L-XEEHB 00
  • DIN 51502: KP00P- 50

 

Advantages:

  • MULTIS COMPLEX SHD 00 meets the lubrication requirements for very different types of equipment.
  • It slow traction coefficient makes it possible to anticipate energy gains and an increase in the service life of the bearings.
  • Miscible with most conventional soap greases (consult TOTAL Lubrifiants).
  • Very good resistance to water, variations in temperatuire and pollution. Permits longer lubrication intervals.
  • MULTIS COMPLEX SHD 00 contains no lead or any other heavy metal deemed harmful to human health or environment.

 

Pack sizes available - 17kg

Discover More +
Total Lactuca MSF 5200 - Metalworking - 166131

Total Lactuca MSF 5200 - Metalworking - 166131

 

Macro-emulsion for aluminium alloys, low and medium carbon steels machining.

 

Applications:

  • LACTUCA MSF 5200 is particularly recommended for machining aluminium alloys and ferrous metals.
  • LACTUCA MSF 5200 has good lubricity and cooling power for carrying out the most difficult machining operations: sawing, etc.
  • Recommended use rates: from 5 to 8 %.

 

 

Specifications: 

  • ISO 6743/7
  • ISO-L MAA

 

Advantages:

  • LACTUCA MSF 5200 is very easy to use, simply by pouring it into good quality water.
  • Excellent cooling and lubricant power.
  • Efficient protection of machined parts and machines against corrosion.
  • Good mechanical performances, providing:

               - Reduced cutting efforts
               - Extended tool lifetime
               - Very good surface finish to parts.

  • Properties in service:

               - Excellent stability over time increases drain intervals;
               - Cuttings have low rate of humidity;
               - Good anti-foaming properties.

  • Resist to the development of bacteria and mould very well,so is more environmentally and operator friendly.
  • Very multifunctional.
  • Very good lubricity.

 

Health and safety:

  • Free of: formaldehyde liberators and boron.
  • Does not contain: chlorine, PTBB, nitrite, NPE or DEA.

 

Pack sizes available - 20L, 208L drums

Discover More +