Kernow Oils - Lubricant Solutions

Industrial

Total MEP Hydraulic Oil ISO 46 - Quality Hydraulic Oil - 152659

Total MEP Hydraulic Oil ISO 46 - Quality Hydraulic Oil - 152659

 

Applications:

  • A good quality hydraulic oil.
  • Manufactured from highly refined base oils.
  • Incorporates modern additive technology.

 

Specifications:

  • ISO ISO 6743/4 HM 46
  • DIN 51524 part 2

 

Advantages:

  • Good viscosity index.
  • Good antiwear, anticorrosion, antirust and antifoaming properties.
  • Low pour point.
  • Low air retention.
  • Good filtration even in the presence of water.

 

Pack sizes available - 20L, 205L drums, bulk delivery

Discover More +
Total Biomoldol 4 - Demoulding - 153012

Total Biomoldol 4 - Demoulding - 153012

 

Biodegradable concrete demoulding oil.

 

Applications:

Delayed biodegradable demoulding oil to be used pure by spraying on metallic, wooden and plastic form linings.

 

Advantages:

  • Easy concrete mould release, due to chemical reactivity.
  • Clean release properties and good surface finishing, free of bubbles and stains,
  • Lower consumption compared with petroleum product
  • Based on vegetables oils, this product is completely biodegradable.

 

Pack sizes available - 20L

Discover More +
Total Copal OGL 2 - Grease - 156085

Total Copal OGL 2 - Grease - 156085

 

Extreme pressure adhesive aluminium complex grease with solid lubricants for heavy-duty applications.

 

Applications:

COPAL OGL 2 is predominantly designed for use on open gears, in cases where an NLGI 2 grade is required. COPAL OGL 2 can be used as a priming lubricant for gears of kilns, mills etc. COPAL OGL 2 can be used as well in plain bearings highly loaded in the most severe conditions. (shocks,high loads, high amount of water,…) or for application requiring a highly adhesive grease (fifth wheel,…). Preferably use a pneumatic pump system. COPAL OGL 2 can be applied by hand with brushes, or other adapted tools. A good cleanliness of tools is recommended for optimal lubrication.

 

 

Specifications: 

  • ISO 6743-9: L-XBDEB 2
  • DIN 51502: OGPF2N-15

 

Advantages:

  • Excellent adhesiveness, associated with the very good resistance to high loads and repeated shock loadings, COPAL OGL 2, gives a high protection level against wear on gear teeth and plain bearings, increasing significantly the service life of the equipment.
  • COPAL OGL 2 contains solid lubricants, decreasing friction coefficient, limitating wear particularly near the tooth crest and tooth base, decreasing energy consumption.
  • Good behaviour in presence of water even under pressure.
  • COPAL OGL 2 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 18kg

Discover More +
Total Copal OGL 0 - Grease - 156088

Total Copal OGL 0 - Grease - 156088

 

Extreme-pressure adhesive aluminium complex grease with solid lubricants for loaded open gears.

 

Applications:

COPAL OGL 0 is predominantly designed for the use on open gears of rotary drum drives, single / double pinion kilns and mill drives, working under severe circumstances (for example in cement plants, paper mills,…). COPAL OGL 0 can be used as well on gear teeth and open gears commonly used in the sugar industry, steel industry, and for windmills (yaw systems). Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump/spray system well adjusted to optimize the quantities of grease sprayed and prevent from any lack of lubrication. Pick-up lubrication is possible with COPAL OGL 0.

 

Specifications:

  • ISO 6743-9: L-XBDHB 0
  • DIN 51 502: OGPF0N - 20

 

Advantages:

  • Adhesion properties, and remarkable load and shocks resistance of COPAL OGL 0 protect gear teeth, increasing reliability and service life of the equipment.
  • COPAL OGL 0 contains solid lubricants, decreasing friction coefficient, limitating wear particularly near the tooth crest and tooth base, decreasing energy consumption.
  • Very good water resistance.
  • Excellent anti-oxidation and anti-corrosion properties thanks to the carefully selected additives.
  • COPAL OGL 0 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 18kg

Discover More +
Total Ceran ST 2 - Grease - 156540

Total Ceran ST 2 - Grease - 156540

 

Extreme pressure adhesive and water resistant calcium sulfonate complex grease.

 

Applications:

  • CERAN ST 2 is a highly, adhesive, extreme pressure and water resistant grease, designed for the lubrication of all kinds of industrial (coilers, rolling mills,…), marine (wire ropes, open gears, hinges, turnbuckles) and offshore applications, operating under the most severe conditions. (water,heat, dust and other pollution).
  • CERAN ST 2 is also suitable as an EP multi purpose grease, in “off road” applications where water is in frequent contact with the grease.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

 

Specifications:

  • ISO 6743-9: L-XBFIB 2
  • DIN 51 502: KP2R -25

 

Advantages:

  • Strong adhesion to surfaces increasing the regreasing intervals and reducing the time spent on preventive maintenance.
  • Excellent thermal stability. It regains its original texture after cooling to ambient temperature.
  • Remarkable load resistance thanks to its naturally high extreme pressure and anti-wear properties.
  • Extraordinary water resistance, even under sea water wash off, no significant loss of consistency is observed even with high amounts of water in contact with the grease.
  • Excellent anti-oxidation and anti-corrosion properties thanks to the nature of the calcium sulfonates and its specific additivation, also in the presence of sea water.
  • CERAN ST 2 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 18kg

Discover More +
Total Carter XEP 460 - High performance gear lubricant - 156656

Total Carter XEP 460 - High performance gear lubricant - 156656

 

High performance lubricant for enclosed gears.

 

Applications:

CARTER XEP is a new generation of high-performance lubricant for heavily loaded reducers. The severest technical specifications were taken into account during the development of this product especially regarding micropitting protection and anticorrosion properties.

 

Specifications:

  • DIN 51517 Part 3 ⇒ CLP group
  • ISO 12925 CKD category
  • AGMA 9005 - D94
  • US STEEL 224
  • DAVID BROWN

 

Advantages:

  • Excellent extreme-pressure performances, remarkable protection of heavily loaded toothing against micropitting.
  • Excellent anti-corrosion properties protecting gears in critical environments (sea water or acidic water contamination).
  • Very good thermal stability ensuring a longer service life than conventional lubricants.
  • Strengthened foaming protection. Good demulsification behaviour.

 

Pack sizes available - 208L drums

Discover More +
Total Carter XEP 150 - High performance gear lubricant - 156657

Total Carter XEP 150 - High performance gear lubricant - 156657

 

High performance lubricant for enclosed gears.

 

Applications:

CARTER XEP is a new generation of high-performance lubricant for heavily loaded reducers. The severest technical specifications were taken into account during the development of this product especially regarding micropitting protection and anticorrosion properties.

 

Specifications:

  • DIN 51517 Part 3 ⇒ CLP group
  • ISO 12925 CKD category
  • AGMA 9005 - D94
  • US STEEL 224
  • DAVID BROWN

 

Advantages:

  • Excellent extreme-pressure performances, remarkable protection of heavily loaded toothing against micropitting.
  • Excellent anti-corrosion properties protecting gears in critical environments (sea water or acidic water contamination).
  • Very good thermal stability ensuring a longer service life than conventional lubricants.
  • Strengthened foaming protection. Good demulsification behaviour.

 

Pack sizes available - 208L drums

Discover More +
Total Carter XEP 680 - High performance gear lubricant - 156659

Total Carter XEP 680 - High performance gear lubricant - 156659

 

High performance lubricant for enclosed gears.

 

Applications:

CARTER XEP is a new generation of high-performance lubricant for heavily loaded reducers. The severest technical specifications were taken into account during the development of this product especially regarding micropitting protection and anticorrosion properties.

 

Specifications:

  • DIN 51517 Part 3 ⇒ CLP group
  • ISO 12925 CKD category
  • AGMA 9005 - D94
  • US STEEL 224
  • DAVID BROWN

 

Advantages:

  • Excellent extreme-pressure performances, remarkable protection of heavily loaded toothing against micropitting.
  • Excellent anti-corrosion properties protecting gears in critical environments (sea water or acidic water contamination).
  • Very good thermal stability ensuring a longer service life than conventional lubricants.
  • Strengthened foaming protection. Good demulsification behaviour.

 

Pack sizes available - 208L drums

Discover More +
Total Carter XEP 320 - High performance gear lubricant - 156759

Total Carter XEP 320 - High performance gear lubricant - 156759

 

High performance lubricant for enclosed gears.

 

Applications:

CARTER XEP is a new generation of high-performance lubricant for heavily loaded reducers. The severest technical specifications were taken into account during the development of this product especially regarding micropitting protection and anticorrosion properties.

 

Specifications:

  • DIN 51517 Part 3 ⇒ CLP group
  • ISO 12925 CKD category
  • AGMA 9005 - D94
  • US STEEL 224
  • DAVID BROWN

 

Advantages:

  • Excellent extreme-pressure performances, remarkable protection of heavily loaded toothing against micropitting.
  • Excellent anti-corrosion properties protecting gears in critical environments (sea water or acidic water contamination).
  • Very good thermal stability ensuring a longer service life than conventional lubricants.
  • Strengthened foaming protection. Good demulsification behaviour.

 

Pack sizes available - 208L drums

Discover More +
Total Hydransafe HFDU 46 - Biodegradable fire resistant hydraulic fluid - 156782

Total Hydransafe HFDU 46 - Biodegradable fire resistant hydraulic fluid - 156782

 

Applications:

  • HYDRANSAFE HFDU 46 is recommended for hydraulic equipment operating in locations comprising a fire risk such as iron and steel works (coking plants, blast furnaces, continuous casting), mines, etc…
  • The use of HYDRANSAFE HFDU 46 lessens the serious risks presented by recourse to a mineral oil on the occasion of rupture of a hose or when a leak gives rise to oil mist, in the immediate vicinity of a flame, a part in the process of melting or a switch cupboard.
  • Thanks to its biodegradability, HYDRANSAFE HFDU 46 is especially recommended when there is a possibility of water contamination: offshore, mines.

 

Specifications:

  • ISO 6743/4 HFDU
  • ISO 12922
  • FACTORY MUTUAL in accordance with FM Approval Standard 6930 - “Flammability classification of Industrial Fluids”.

 

Advantages:

  • Considerable fire resistance properties.
  • High flash point and high spontaneous ignition temperature.
  • Protection against wear and therefore a longer service life of the hydraulic components.
  • Very good anticorrosion properties.
  • Very high natural viscosity index guaranteeing a viscosity constantly adapted to the temperature range in which the fluid must be used.
  • Low pour-point providing good performances at low temperature.
  • Biodegradable.
  • Limit temperature of use 120°C.

 

Pack sizes available - 208L drums, 1000L IBC

Discover More +