Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Brand...

Industrial

Total Carter EP 680 - Mineral oils for enclosed gears - 110499

Total Carter EP 680 - Mineral oils for enclosed gears - 110499

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter XEP 680 - High performance gear lubricant - 156659

Total Carter XEP 680 - High performance gear lubricant - 156659

 

High performance lubricant for enclosed gears.

 

Applications:

CARTER XEP is a new generation of high-performance lubricant for heavily loaded reducers. The severest technical specifications were taken into account during the development of this product especially regarding micropitting protection and anticorrosion properties.

 

Specifications:

  • DIN 51517 Part 3 ⇒ CLP group
  • ISO 12925 CKD category
  • AGMA 9005 - D94
  • US STEEL 224
  • DAVID BROWN

 

Advantages:

  • Excellent extreme-pressure performances, remarkable protection of heavily loaded toothing against micropitting.
  • Excellent anti-corrosion properties protecting gears in critical environments (sea water or acidic water contamination).
  • Very good thermal stability ensuring a longer service life than conventional lubricants.
  • Strengthened foaming protection. Good demulsification behaviour.

 

Pack sizes available - 208L drums

Discover More +
Total CYL C 680 - Ashless Circulating Oil - 159056

Total CYL C 680 - Ashless Circulating Oil - 159056

 

Applications:

CYL C oils are compounded mineral oils for lubricating steam engine cylinders whenever condensate is not recycled. Used for lubricating heavy, open machinery exposed to high temperatures.

 

Specifications:

  • ISO 6743/0Z

 

Advantages:

  • High natural viscosity index.
  • Good seals compatibility.
  • High ignition point.
  • Very high lubricating power ensuring a very tough oil film at high pressures and temperatures.
  • Very high resistance to water washout.

 

Pack sizes available - 208L drums

Discover More +
Total Carter SY 680 - Synthetic lubricant (polyglycol) - 157531

Total Carter SY 680 - Synthetic lubricant (polyglycol) - 157531

 

Applications:

  • Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).
  • Lubrication of worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • NF-ISO 6743-6 category CKS/CKT

Manufacturers: DAVID BROWN, CMD

 

Advantages:

  • Very high and shear stable viscosity index.
  • Low coefficient of friction: greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil.
  • Excellent thermal stability: extended oil lifetime.
  • Very good foaming behaviour.
  • Excellent extreme pressure and anti-wear properties.
  • Very high level corrosion protection (tested with sea and acidic water).

 

Pack sizes available - 20L

Discover More +