Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Brand...

Industrial

Total Finavestan A 360 B - Medicinal White Oils - 110317

Total Finavestan A 360 B - Medicinal White Oils - 110317

 

Applications:

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:
  • Polymer: plasticizer & external lubricant for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
  • Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
  • Paper: cut and slit lubricant.
  • Dust binder, defoamer, furniture polishes.
 
The application is subject to the applicable laws and regulations in each country.
  • CAS number: 8042-47-5
  • EINECS number: 232-455-8
  • INCI number (EU): Paraffinum Liquidum

 

Specifications:

 

FINAVESTAN white oils meet the requirements of the following specifications:
  • European Pharmacopoeia, most recent edition.
  • US Pharmacopoeia, most recent edition.
  • US FDA, 21 CFR 178.3620(a), White Mineral Oil.
  • European Regulation 2011/10/CE relating to plastic materials and articles intended to come into contact with foodstuffs.
  • FINAVESTAN white oils are NSF H1 registered, suitable for incidental food contact.

 

Advantages:

  • FINAVESTAN white oils are obtained from petroleum through several important refining stages that guaranty their extremely high purity.
  • FINAVESTAN are transparent and colorless oils. They are also odourless and tasteless.
  • As medicinal grades, FINAVESTAN white oils meet the requirements of the cosmetic, pharmaceutical and food-related industry subject to the regulations in each country.

 

Pack sizes available - 20L, 208L drums, 1000L IBC

Discover More +
Total Azolla ZS 68 - Hydraulic oil - 110480

Total Azolla ZS 68 - Hydraulic oil - 110480

 

Very high performance anti-wear hydraulic oils.

 

Applications:

Designed for use in all kind of hydraulic sytems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment. Also used in many other applications, where an universal high performance anti-wear lubricant is the first choice : low charged gears, sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.

 

Specifications:

AFNOR NF E 48-603 HM
ISO 6743/4 HM
DIN 51524 P2 HLP
CINCINNATI MILACRON P68, P69, P70
VICKERS M-2950S, -I-286
DENISON HF0, HF1, HF2 (T6H20C)

 

Advantages:

  • High protection against wear insuring maximum equipment life.
  • Superior thermal stability avoiding formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • Remarkable filterability even in the presence of water.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Good demulsibility ensuring rapid water separation
  • Reduced maintenance and operating costs.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 68 - Mineral oils for enclosed gears - 110497

Total Carter EP 68 - Mineral oils for enclosed gears - 110497

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Equivis ZS 68 - Hydraulic Oils - 110576

Total Equivis ZS 68 - Hydraulic Oils - 110576

 

High viscosity index anti-wear hydraulic oils.

 

Applications:

The Equivis ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points). Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside. Provides easy start up at low temperature (-30°C) and regular operating in all seasons for civil engineering, agriculture, marine, transport and other industrial applications.

 

Specifications:

  • AFNOR NF E 48-603 HV
  • ISO 6743/4 HV
  • DIN 51524 P3 HVLP
  • CINCINNATI MILACRON P68, P69, P70
  • VICKERS M-2950S, -I-286

 

Advantages:

  • Very high viscosity index
  • Good shear stability.
  • Superior thermal stability avoiding the formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • High protection against wear insuring maximum equipment life.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Remarkable filterability even in the presence of water.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Very low pour point.
  • Good demulsibility ensuring rapid water separation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Lunaria NH 68 - Compressor Oil - 112440

Total Lunaria NH 68 - Compressor Oil - 112440

 

Additive enhanced hydrocracked mineral oil for ammonia (R 717) refrigerating compressors.

 

Applications:

  • Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
  • Hydrocracked technology of base oils to improve oil drain interval.
  • Field of application: evaporator temperature down to -30°C.

 

Specifications:

OEM Approvals - APV, BOCK, J&E HALL, GRAM, GRASSO, HOWDEN, SABROE.

 

Advantages:

  • High resistance to oxidation in the presence of ammonia. Base oils and additivation system specillay selected to avoid the formation of black sludges (reaction between oil and ammonia).
  • Low pour point, eliminating the risk of any residual lubricant freezing in the evaporator, thereby providing excellent heat exchange.
  • Very high flash point given the low volatility of LUNARIA NH oils: oil consumption is reduced by 30 to 50 % compared with conventional oils.
  • Good compatibility with common elastomers (chloroprene, NBR….).

 

Warning: Must be kept in storage to avoid the presence of water within the oil. Water could block the evaporator.

 

Pack sizes available - 208L drums

Discover More +
Total Lunaria SH 46 - Compressor Oil - 112445

Total Lunaria SH 46 - Compressor Oil - 112445

 

Full-synthetic PAO based oil for ammonia (R 717) refrigerating compressors.

 

Applications:

  • Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
  • PAO (polyalphaolefin) base oils to improve oil drain interval and ensure good performances even at very low temperature.
  • Field of application: evaporator temperature down to -50°C.

 

Specifications:

  • OEM Approvals - APV, BOCK, J&E HALL, GRAM, GRASSO, HOWDEN, SABROE.
  • NSF-H1 registered certificate number: 139826: LUNARIA SH 46

 

Advantages:

  • High resistance to oxidation in the presence of ammonia. Synthetic base oils and additivation system specially selected to avoid the formation of black sludges (reaction between oil and ammonia).
  • Low pour point, eliminating the risk of any residual lubricant freezing in the evaporator, thereby providing excellent heat exchange.
  • Very high flash point given the low volatility of LUNARIA SH oils: oil consumption is reduced by 30 to 50 % compared with conventional oils.
  • Good compatibility with common elastomers (chloroprene, NBR….).

 

Warning: Must be kept in storage to avoid the presence of water within the oil. Water could block the evaporator.

 

Pack sizes available - 208L drums

Discover More +
Total Cirkan RO 68 - Lubrication - 112519

Total Cirkan RO 68 - Lubrication - 112519

 

R and O type machine oils.

 

Applications:

CIRKAN RO oils are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions:
- fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.
- viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties.

 

Specifications:

  • ISO 6743/4 Category HL
  • ISO 6743/6 Category CKB
  • ISO 11158 Category ISHL
  • ISO 12925-1 Category CKB

Advantages:

  • High natural viscosity index.
  • Good compatibility with seals.
  • Very good demulsification properties.
  • Excellent anti-foaming, anti-corrosion and anti-oxidation properties.

 

Pack sizes available - 20L

Discover More +
Total Lunaria FR 68 - Compressor Oil - 112589

Total Lunaria FR 68 - Compressor Oil - 112589

 

Wax free naphtenic mineral oils for refrigerating compressors.

 

Applications:

  • Lubrication of cylinders, bearing and seals of all types of refrigerating compressors.
  • Lubrication of rotary screw compressors:

               - parallel screw
               - single screw with Zimmern type gear.

  • The LUNARIA FR are compatible with most of chlorofluorinated refrigerant gases and with ammonia in compatible service conditions (evaporator temperature higher than - 15 °C). For refrigerating applications with low temperature ammonia, it is recommended to use the specific lubricants LUNARIA NH or LUNARIA SH.

 

Specifications:

  • ISO 6743-3 : DRA.

OEM Approvals - APV, BOCK, BITZER, GRAM, CARRIER, GRASSO, HOWDEN, J&E HALL, SABROE, YORK.

 

Advantages:

  • High chemical stability with refrigerants.
  • Absence of copper plating.
  • Very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (evaporator temperature higher than - 15 °C).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Dacnis SH 68 - PAO Synthetic oils for rotary air compressors - 112594

Total Dacnis SH 68 - PAO Synthetic oils for rotary air compressors - 112594

 

Applications:

Lubrication and cooling of the following types of air compressors:

  • Rotary screw compressors (ISO VG 32, 46, 68)
  • Reciprocating compressors (ISO VG 100).

Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.

 

Specifications:

  • ISO 6743 classified DAJ for heavy duty applications.

 

Advantages:

The properties of DACNIS SH:

  • Avoids the carbon build up
  • Allows a good oil/air and oil/condensates separation
  • Protects the screws against wear and corrosion.

The use of DACNIS SH allows real cuts in the operating costs of the compressed air production facility by:

  • Optimising the compressor efficiency
  • Extending the drain intervals. The possible achieved drain intervals can be:

                 - from 4000 to 6000 hours for fixed compressors in standard use
                 - up to 8000 hours with lubricant analysis monitoring.

  • Extending the service life of the separating filter elements. The DACNIS SH have an anti-clogging property that ensures the efficiency of the filters during a long period (up to 8000 hours).

 

Pack sizes available - 20L

Discover More +
Total Dacnis SE 68 - Synthetic ester oils for air compressors - 121890

Total Dacnis SE 68 - Synthetic ester oils for air compressors - 121890

 

Applications:

DACNIS SE is a high performance lubricant developed for lubrication and cooling of the following types of air compressors:
- high pressure reciprocating air compressor (ISO VG 100)
- screw and rotary vane air compressor (ISO VG 46, 68 or 100)
- turbocompressors (ISO VG 68)
- vacuum pumps (ISO VG 100).

 

Specifications:

  • ISO 6743 classified DAC and DAJ for heavy duty applications.
  • DACNIS SE meets the DIN 51 506 VDL requirements.

 

Advantages:

  • Excellent thermal stability of the lubricant under high temperature conditions.
  • Low foaming tendency for turbocompressor applications.
  • Low volatility.
  • Low vanish and carbon deposits.
  • Protection against rust and corrosion.
  • Compressor start up by - 20°C.
  • Operating conditions at discharge temperature up to 250°C and discharge pressure up to 200 bars.

 

Pack sizes available - 20L drums, 208L drums

Discover More +