Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Brand...

Industrial

Total Azolla ZS 46 - Hydraulic oil - 110477

Total Azolla ZS 46 - Hydraulic oil - 110477

 

Very high performance anti-wear hydraulic oils.

 

Applications:

Designed for use in all kind of hydraulic sytems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment. Also used in many other applications, where an universal high performance anti-wear lubricant is the first choice : low charged gears, sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.

 

Specifications:

AFNOR NF E 48-603 HM
ISO 6743/4 HM
DIN 51524 P2 HLP
CINCINNATI MILACRON P68, P69, P70
VICKERS M-2950S, -I-286
DENISON HF0, HF1, HF2 (T6H20C)

 

Advantages:

  • High protection against wear insuring maximum equipment life.
  • Superior thermal stability avoiding formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • Remarkable filterability even in the presence of water.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Good demulsibility ensuring rapid water separation
  • Reduced maintenance and operating costs.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Equivis ZS 46 - Hydraulic Oils - 110573

Total Equivis ZS 46 - Hydraulic Oils - 110573

 

High viscosity index anti-wear hydraulic oils.

 

Applications:

The Equivis ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points). Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside. Provides easy start up at low temperature (-30°C) and regular operating in all seasons for civil engineering, agriculture, marine, transport and other industrial applications.

 

Specifications:

  • AFNOR NF E 48-603 HV
  • ISO 6743/4 HV
  • DIN 51524 P3 HVLP
  • CINCINNATI MILACRON P68, P69, P70
  • VICKERS M-2950S, -I-286

 

Advantages:

  • Very high viscosity index
  • Good shear stability.
  • Superior thermal stability avoiding the formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • High protection against wear insuring maximum equipment life.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Remarkable filterability even in the presence of water.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Very low pour point.
  • Good demulsibility ensuring rapid water separation.

 

Pack sizes available - 3x5L, 20L, 208L drums, 1000L IBC, bulk delivery

Discover More +
Total Azolla DZF 46 - Hydraulic Oil - 112419

Total Azolla DZF 46 - Hydraulic Oil - 112419

 

Detergent anti-wear hydraulic oils.

 

Applications:

  • Any hydraulic circuits where significant amounts of water are unavoidably introduced and when it is impossible to drain off the water (for instance on circuits that work around the clock).
  • Any hydraulic circuits working under loaded conditions : lubrication of stamping presses for example (Müller Weingarten approval).

 

Specifications:

ISO 6743/4
DIN 51 524 p 2, HLP (except desemulsibility)
AFNOR NF E 48 603 HM (except desemulsibility)
MAN N 698 H-LPD
MÜLLER WEINGARTEN

 

Advantages:

  • Detergent characteristics allowing the fluid to absorb large quantities of water while preserving its properties.
  • High thermal stability giving the fluid good resistance at high operating temperatures.
  • Excellent antiwear capacity ensuring an extended life time of product.
  • Excellent level of resistance to foaming (silicon free defoamer) together with rapid air release.
  • Specially formulated to provid good filterability even in presence of high water content.

 

Pack sizes available - 208L drums, 1000L IBC

Discover More +
Total Equivis XV 46 - Hydraulic Oils - 112452

Total Equivis XV 46 - Hydraulic Oils - 112452

 

Very high viscosity index anti-wear hydraulic oils with high shear resistance.

 

Applications:

Equivis XV is a range of anti-wear hydraulic fluids recommended for all kind of hydraulic circuits operating within a very wide temperature range. Their excellent viscosimetric properties and their high shear resistance make the oils especially suitable for the use in mobile machines hydraulic systems intended for cold regions or which have to work in low temperature environments such as cold stores.

 

Advantages:

  • Very high viscosity index (VI > 250).
  • Very high shear stability to ensure proper working of the hydraulic system in a very wide temperature range even under extreme shear rate conditions.
  • Easy low temperature operation due to a very low pour point and an exceptional viscosimetric behaviour.
  • High protection against wear insuring maximum equipment life.
  • Superior thermal and hydrolysis stability.
  • Good oxidation stability ensuring a long service life of the fluid
  • Excellent protection against rust and corrosion.
  • Good anti-foam, air release and desemulsibility properties.
  • Good behaviour towards current elastomers.

 

Pack sizes available - 208L drums

Discover More +
Total Hydransafe HFC 146 - Fire resistant hydraulic fluid - 112455

Total Hydransafe HFC 146 - Fire resistant hydraulic fluid - 112455

 

Applications:

  • HYDRANSAFE HFC 146 is a high performance synthetic water-polymer, fire resistant hydraulic fluid.
  • Regulation and hydraulic circuits of Furnaces, Continuous Casting Units in the Steel and Aluminium Industry, Heat-treat Ovens for quenching operations, Drying Furnace and other applications in fire risk areas, as in the mining industry…
  • Hydraulic systems of mould injection machines.
  • Operating temperature range is from -20 °C to + 60 °C.
  • When changing from mineral oil based hydraulic system components and apply an appropriate cleaning of the hydraulic system.

 

Specifications:

  • ISO 6743/4 HFC
  • ISO 12922 HFC
  • Fulfill the requirements according the 7. Lux. Report. Tested by LABORATOIRE ATEST.

 

Advantages:

  • Excellent anti-wear performance, insuring a log life of the equipment.
  • Very good corrosion protection properties.
  • Good air release and good anti-foam properties.
  • Thanks to its formulation, HYDRANSAFE HFC 146 has a long service life and provides reduction in maintenance costs.
  • Excellent fire resistance due to high water content.
  • It is miscible with the other HFC type fluids, nevertheless, a compatibility test is advised.
  • The very good filterability of HYDRANSAFE HFC 146 permit fine filtration.

 

Pack sizes available - 208L drums

Discover More +
Total Lunaria FR 46 - Compressor Oil - 112588

Total Lunaria FR 46 - Compressor Oil - 112588

 

Wax free naphtenic mineral oils for refrigerating compressors.

 

Applications:

  • Lubrication of cylinders, bearing and seals of all types of refrigerating compressors.
  • Lubrication of rotary screw compressors:

               - parallel screw
               - single screw with Zimmern type gear.

  • The LUNARIA FR are compatible with most of chlorofluorinated refrigerant gases and with ammonia in compatible service conditions (evaporator temperature higher than - 15 °C). For refrigerating applications with low temperature ammonia, it is recommended to use the specific lubricants LUNARIA NH or LUNARIA SH.

 

Specifications:

  • ISO 6743-3 : DRA.

OEM Approvals - APV, BOCK, BITZER, GRAM, CARRIER, GRASSO, HOWDEN, J&E HALL, SABROE, YORK.

 

Advantages:

  • High chemical stability with refrigerants.
  • Absence of copper plating.
  • Very good miscibility behaviour with refrigerants allowing a good oil return to the compressor (evaporator temperature higher than - 15 °C).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Dacnis SH 46 - PAO Synthetic oils for rotary air compressors - 112595

Total Dacnis SH 46 - PAO Synthetic oils for rotary air compressors - 112595

 

Applications:

Lubrication and cooling of the following types of air compressors:

  • Rotary screw compressors (ISO VG 32, 46, 68)
  • Reciprocating compressors (ISO VG 100).

Recommended whenever the discharge temperature exceeds 90°C and/or the discharge pressure exceeds 10 bars.

 

Specifications:

  • ISO 6743 classified DAJ for heavy duty applications.

 

Advantages:

The properties of DACNIS SH:

  • Avoids the carbon build up
  • Allows a good oil/air and oil/condensates separation
  • Protects the screws against wear and corrosion.

The use of DACNIS SH allows real cuts in the operating costs of the compressed air production facility by:

  • Optimising the compressor efficiency
  • Extending the drain intervals. The possible achieved drain intervals can be:

                 - from 4000 to 6000 hours for fixed compressors in standard use
                 - up to 8000 hours with lubricant analysis monitoring.

  • Extending the service life of the separating filter elements. The DACNIS SH have an anti-clogging property that ensures the efficiency of the filters during a long period (up to 8000 hours).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Dacnis SE 46 - Synthetic ester oils for air compressors - 112609

Total Dacnis SE 46 - Synthetic ester oils for air compressors - 112609

 

Applications:

DACNIS SE is a high performance lubricant developed for lubrication and cooling of the following types of air compressors:
- high pressure reciprocating air compressor (ISO VG 100)
- screw and rotary vane air compressor (ISO VG 46, 68 or 100)
- turbocompressors (ISO VG 68)
- vacuum pumps (ISO VG 100).

 

Specifications:

  • ISO 6743 classified DAC and DAJ for heavy duty applications.
  • DACNIS SE meets the DIN 51 506 VDL requirements.

 

Advantages:

  • Excellent thermal stability of the lubricant under high temperature conditions.
  • Low foaming tendency for turbocompressor applications.
  • Low volatility.
  • Low vanish and carbon deposits.
  • Protection against rust and corrosion.
  • Compressor start up by - 20°C.
  • Operating conditions at discharge temperature up to 250°C and discharge pressure up to 200 bars.

 

Pack sizes available - 20L drums

Discover More +
Total MEP Hydraulic Oil ISO 46 - Quality Hydraulic Oil - 152659

Total MEP Hydraulic Oil ISO 46 - Quality Hydraulic Oil - 152659

 

Applications:

  • A good quality hydraulic oil.
  • Manufactured from highly refined base oils.
  • Incorporates modern additive technology.

 

Specifications:

  • ISO ISO 6743/4 HM 46
  • DIN 51524 part 2

 

Advantages:

  • Good viscosity index.
  • Good antiwear, anticorrosion, antirust and antifoaming properties.
  • Low pour point.
  • Low air retention.
  • Good filtration even in the presence of water.

 

Pack sizes available - 20L, 205L drums, bulk delivery

Discover More +
Total Hydransafe HFDU 46 - Biodegradable fire resistant hydraulic fluid - 156782

Total Hydransafe HFDU 46 - Biodegradable fire resistant hydraulic fluid - 156782

 

Applications:

  • HYDRANSAFE HFDU 46 is recommended for hydraulic equipment operating in locations comprising a fire risk such as iron and steel works (coking plants, blast furnaces, continuous casting), mines, etc…
  • The use of HYDRANSAFE HFDU 46 lessens the serious risks presented by recourse to a mineral oil on the occasion of rupture of a hose or when a leak gives rise to oil mist, in the immediate vicinity of a flame, a part in the process of melting or a switch cupboard.
  • Thanks to its biodegradability, HYDRANSAFE HFDU 46 is especially recommended when there is a possibility of water contamination: offshore, mines.

 

Specifications:

  • ISO 6743/4 HFDU
  • ISO 12922
  • FACTORY MUTUAL in accordance with FM Approval Standard 6930 - “Flammability classification of Industrial Fluids”.

 

Advantages:

  • Considerable fire resistance properties.
  • High flash point and high spontaneous ignition temperature.
  • Protection against wear and therefore a longer service life of the hydraulic components.
  • Very good anticorrosion properties.
  • Very high natural viscosity index guaranteeing a viscosity constantly adapted to the temperature range in which the fluid must be used.
  • Low pour-point providing good performances at low temperature.
  • Biodegradable.
  • Limit temperature of use 120°C.

 

Pack sizes available - 208L drums, 1000L IBC

Discover More +