Kernow Oils - Lubricant Solutions

Automotive

Total Lical EP 2 - Grease - 110203

Total Lical EP 2 - Grease - 110203

 

Multi purpose extreme pressure lithium/calcium grease.

 

Applications:

  • LICAL EP 2 is a multi purpose extreme pressure grease, formulated for the lubrication of all kinds of industrial applications, operating in wet and dusty and/or dry conditions.
  • LICAL EP 2 is also suitable as EP multi purpose grease, in “off road” applications where water is in frequent contact with the grease, e.g. Pin-bushings, crown, and caterpillar wheels on excavators.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

 

Specifications:

  • ISO 6743-9: L-XBDHB 2
  • DIN 51 502: KP2K -25

 

Advantages:

  • Because of its true Multi Purpose character LICAL EP 2 may replace a wide range of greases, allowing stock rationalisation and simplification of maintenance.
  • Forms a durable lubrication film, resulting in reduction of maintenance and down-time costs.
  • Miscible with most other conventional soap greases.
  • Excellent mechanical stability avoiding ejection or loss of consistency during operation.
  • Excellent adhesion to metal.
  • Good thermal stability, leading to high resistance to temperature variations.
  • LICAL EP 2 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 50kg

Discover More +
Total Ceran HV - Grease - 110293

Total Ceran HV - Grease - 110293

 

Extreme-pressure water resistant high temperature calcium sulfonate complex grease.

 

Applications:

CERAN HV is a heavy duty extreme pressure grease, pre-eminently designed for the lubrication of industrial bearings working under high temperatures and high loads in the steel industry. CERAN HV is also suitable as EP multi purpose grease, in various other industrial applications where water is in frequent contact with the grease. Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system.

 

Specifications:

  • ISO 6743-9: L-XBFHB 1/2
  • DIN 51 502: KP1/2R -25
  • Performances meet all Voith VN108 requirements for wet end and dryer part.

 

Advantages:

  • Thanks to its very sophisticated formula and performance reserves, CERAN HV meets the most stringent industrial requirements set by industrial bearing manufacturers.
  • Excellent thermal and mechanical stability. It regains its original texture after cooling to ambient temperature.
  • Remarkable load resistance thanks to its naturally high extreme pressure and anti-wear properties.
  • Extraordinary water resistance, no significant loss of consistency is observed even with high amounts of water entering the grease.
  • Excellent anti-oxidation and anti-corrosion properties thanks to the very nature of the calcium sulfonates, also in the presence of sea water.
  • CERAN HV does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 18kg, 50kg, 180kg, Bulk delivery

Discover More +
Total ATF 33 - Automatic Transmission Fluid - 110465

Total ATF 33 - Automatic Transmission Fluid - 110465

 

Applications:

Can be mixed only with fluids meeting the same specification.
- Automatic or semi-automatic transmissions when a fluid meeting "type F" FORD M2C-33F (SQM-2C-9004BA) or "type G" FORD M2C-33G (SQM-2C-9007AA) is required by the manufacturer:

  • Passenger car transmissions : Ford (C3, C4, FMW before sept.80), Austin Morris*, Jaguar, Mazda, Saab*                    *BORG-WARNER transmissions
  • Powershift transmissions Shuttle (JCB).

- Can also be used as power steering or torque converter fluid when the manufacturer requires a fluid of this type.

 

Performance:

FORD M2C-33G ( former licence n° 3PE-77225 )

 

Advantages:

  • High viscosity index.
  • Very low pour point.
  • Very good thermal stability.
  • Excellent resistance to oxidation.
  • Friction properties specific to the requirements of some FORD transmissions.

 

Pack sizes available - 20L

Discover More +
Total Fluide ATX - Automatic Transmission Fluid - 110585

Total Fluide ATX - Automatic Transmission Fluid - 110585

 

Applications:

  • Automatic or semi-automatic transmissions and torque converters of passenger cars, light commercial vehicles and industrial vehicles, when the manufacturer requires an ATF (Automatic Transmission Fluid) GM DEXRON-IID. Not suitable when a fluid type FORD M2C-33F or G is required.
  • Manual gear boxes when an ATF fluid is required.
  • Hydrostatic transmissions.
  • Power steering.
  • Hydraulic systems when a fluid type GM DEXRON-IID is required.

 

Properties:

  • Very high viscosity index linked with an excellent viscosity stability in operation.
  • Very low pour point.
  • Very good thermal stability.
  • Excellent resistance to oxidation.
  • Friction properties specific to the requirements of GENERAL MOTORS Hydramatic.
  • Viscosity adapted to MERCEDES requirements MBApproval 236.6.

 

Performance:

  • BMW group 23 - 3.0 and 24 - 3.0
  • FORD MERCON
  • DEXRON-IID
  • MAN 339 type Z-1 (ex MAN 339 type D)
  • MAN 339 type V-1 (ex MAN 339 type D)
  • MB-Approval 236.6
  • VOITH H 55.6335
  • PSA PEUGEOT CITROËN S71 2102
  • ZF TE-ML 03D, 04D, 09, 11A, 14A, 17C

 

Pack sizes available - 18x1L, 20L, 208L drums, bulk delivery

Discover More +
Total Fluide II D - Fluid for automatic transmissions and hydraulic systems - 11

Total Fluide II D - Fluid for automatic transmissions and hydraulic systems - 110594

 

Applications:

  • Automatic or semi-automatic transmissions and torque converters of passenger cars, light commercial vehicles and industrial vehicles, when the manufacturer requires an ATF (Automatic Transmission Fluid) GM DEXRON-IID.
  • Manual gear boxes when an ATF fluid is required.
  • Hydrostatic transmissions.
  • Power steering.
  • Hydraulic systems when a fluid type GM DEXRON-IID is required.

 

Properties:

  • Very high viscosity index linked with an excellent viscosity stability in operation.
  • Very low pour point.
  • Very good thermal stability.
  • Excellent resistance to oxidation.
  • Friction properties specific to the requirements of GENERAL MOTORS Hydramatic.

 

Performance:

Homologated - MAN 339 Type Z-1 & V-1, VOITH H 55.633535, ZF TE-ML 04D, 09, 14A, 17C, MB-Approval 236.9

Meets the specific requirements - GM DEXRON IID, FORD MERCON

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total LHM Plus - Mineral Hydraulic Fluid - 110629

Total LHM Plus - Mineral Hydraulic Fluid - 110629

 

Applications:

  • Hydraulic systems of Citroen XM, Xantia, BX, CX, SM, GS.
  • Hydraulic systems of Citroen ID and DS vehicles manufactured since September 1966 (parts painted in green).
  • Hydraulic systems on Citroen vans N, P and C35.
  • Brake circuits on Ami 8, Ami Super, Dyane and Mehari since September 1977 and on 2CV since July 1982.
  • Level adjuster on Peugeot 405 X4.
  • Not miscible and not compatible with synthetic fluids including synthetic fluids DOT3, DOT4, DOT5 and former Citroen fluids of LHS 2 type.

 

 

Performance: 

  • PSA Peugeot Citroen B71 2710

 

Advantages:

  • Exceptionally high viscosity index.
  • Very low pour point.
  • High stability.
  • Excellent lubricating properties.
  • High boiling temperatures and not sensitive to moisture (non hygroscopic product).
  • Very good protection against corrosion.

 

Pack sizes available - 16x1L, 20L, 208L drums

Discover More +
Total Ceran WR 2 - Grease - 111562

Total Ceran WR 2 - Grease - 111562

 

Extreme pressure water resistant high temperature calcium sulfonate complex grease.

 

Applications:

CERAN WR 2 is a multi purpose extreme pressure grease, formulated for the lubrication of all kinds of industrial, marine and off shore applications, operating under the most severe conditions. (water,heat, dust and other pollution). CERAN WR 2 is also suitable as EP multi purpose grease, in “off road” applications where water is in frequent contact with the grease. Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

 

Specifications:

  • Performances meet all Voith VN 108 requirements (soap is not lithium but calcium sulfonate complex).
  • ISO 6743-9: L-XBFIB 2
  • DIN 51 502: KP2R -25
  • Marine standard STM 310A (NATO G 460)

 

Advantages:

  • Thanks to its very sophisticated formula and performance reserves, CERAN WR 2 meets the most stringent industrial requirements.Its range of applications is extensive, as a result it can replace and outclass numerous conventional greases.
  • Excellent thermal stability. It regains its original texture after cooling to ambient temperature.
  • Remarkable load resistance thanks to its naturally high extreme pressure and anti-wear properties.
  • Extraordinary water resistance, no significant loss of consistency is observed even with high amounts of water entering the grease.
  • Excellent anti-oxidation and anti-corrosion properties thanks to the very nature of the calcium sulfonates, also in the presence of sea water.
  • CERAN WR 2 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 24x425g, 18kg, 50kg, 180kg, bulk delivery

Discover More +
Total CYL 1000 - Steam engine cylinders - 112021

Total CYL 1000 - Steam engine cylinders - 112021

 

Applications:

  • CYL oils are pure mineral oils for lubricating steam engine cylinders where condensate is recycled:

                      - saturated steam: grades 460 and 680.
                      - superheated steam: grade 100.

  • They are also used for lubricating heavy machinery exposed to high temperatures.

 

Specifications:

  • ISO 6743/0Z

 

Advantages:

  • High natural viscosity index.
  • Good compatibility with seals.
  • High ignition point.
  • Benefits from advanced refining.

 

Pack sizes available - 208L drums

Discover More +
Total Multis Complex EP 2 - Lithium complex grease - 110369

Total Multis Complex EP 2 - Lithium complex grease - 110369

 

Multi purpose extreme pressure high temperature lithium complex grease.

 

Applications:

  • MULTIS COMPLEX EP 2 is designed for the lubrication various applications in all types of operating conditions, but particularly where the operation temperature is high and the use of conventional lithium greases is limited.
  • MULTIS COMPLEX EP 2 is a true multi purpose grease, formulated for lubrication of loaded slide-,ball-, and roller-bearings, wheelbearings, universal joints, chassis, and various shock loaded or vibrating applications in transport, agriculture and off road vehicles.
  • Suitable as general purpose grease for industrial applications requiring a NLGI 2 grade Extreme Pressure grease, resistant to elevated temperatures.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

 

Specifications: 

  • ISO 6743-9: L-XBEHB 2
  • DIN 51502: KP2P- 20

 

Advantages: 

  • Thanks to its sophisticated formulation MULTIS COMPLEX EP 2 meets a wide variety of requirements. Its range of applications is extensive, allowing stock rationalisation and simplification of maintenance.
  • Fulfills the requirements of most automotive Original Equipment Manufacturers.
  • Forms a lubricating film which is durable, and resistant to humidity, temperature variations and pollution, and hence reduces maintenance and costs.
  • Miscible with most other conventional soap greases.
  • MULTIS COMPLEX EP 2 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 24x400g, 12.5kg, 18kg, 50kg, 180kg drums

Discover More +
Total Multis EP 1 - Grease - 110378

Total Multis EP 1 - Grease - 110378

 

Multi purpose extreme pressure lithium/calcium grease.

 

Applications:

  • MULTIS EP 1 is a true multi purpose grease, formulated for lubrication of loaded slide-ball and roller-bearings, wheelbearings, universal joints, chassis, and various shock loaded or vibrating applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.
  • Suitable as general purpose grease for industrial applications requiring a NLGI 1 grade Extreme Pressure grease.
  • Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump system or cartridges.

 

Specifications:

  • ISO 6743-9: L-XBCEB 1
  • DIN 51 502: KP1K -30

 

Advantages:

  • Because of its true Multi Purpose character MULTIS EP 1 may replace a wide range of greases, allowing stock rationalisation and simplification of maintenance.
  • Forms a durable lubrication film, resulting in reduction of maintenance and down-time costs.
  • Miscible with most other conventional soap greases.
  • Excellent mechanical stability avoiding ejection or loss of consistency during operation.
  • Excellent adhesion to metal.
  • Good thermal stability, leading to high resistance to temperature variations.
  • MULTIS EP 1 does not contain lead, or other heavy metals considered harmful to human health and the environment.

 

Pack sizes available - 24x400g, 12.5kg, 18kg, 50kg, 180kg

Discover More +