Kernow Oils - Lubricant Solutions

Marine

Castrol Hyspin HVI 15 - High viscosity index anti-wear hydraulic oils - 6035

Castrol Hyspin HVI 15 - High viscosity index anti-wear hydraulic oils - 6035

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +
Castrol Spheerol LMM - Lithium based extreme pressure grease - 9056

Castrol Spheerol LMM - Lithium based extreme pressure grease - 9056

 

Designed for normal and heavily loaded bearings operating at low and medium speeds and those subject to shock loading. Applications also include pivot pins, cams and screws.

 

ISO Viscosity Grades and pack sizes available
SPHEEROL LMM - 18KG KEG

 

DESCRIPTION
Spheerol LMM is an NLGI 2 lithium based grease, containing molybdenum disulphide solid lubricant to enhance its load carrying properties under conditions of high or shock loading or to prevent scuffing or fretting. It contains oxidation and corrosion inhibitors, antiwear additives, has good mechanical stability and can be used in the presence of moisture.

 

APPLICATION
Spheerol LMM may be used in plain and roller elements bearings including heavily loaded bearings at low and medium speeds, and those subject to shock loading and excessive vibrations.

 

ADVANTAGES
• Excellent EP and anti-wear performance - protects equipment against extreme loading and helps minimise bearing and component wear.
• Resistance to scuffing and fretting- provides protection against fretting that can occur on parts subject to reciprocating and sliding motion.
• High mechanical stability – the grease keeps its consistency in service ensuring long lubricant life.
• Good adhesion – continuous lubrication and reduced consumption as film stays between lubricated surfaces.
• Good water resistance – the grease film remains on the surface even in the presence of water.
• Resists the corrosion of both copper and steel – helps prevent rust and oxidation on metal surfaces.

Discover More +
Castrol Spheerol FG 00 EP - Semi-fluid Gear Grease - 9020

Castrol Spheerol FG 00 EP - Semi-fluid Gear Grease - 9020

 

Semi-fluid Gear Grease for the lubrication of industrial spur, bevel and helical enclosed gears.

 

ISO Viscosity Grades and pack sizes available
SPHEEROL FG 00 EP - 12.5 KG BKT & 50 KILO KEG

 

DESCRIPTION
SpheerolTM FG 00 EP is a semi-fluid EP (extreme pressure) grease, based on polymer thickened mineral oil. The Extreme Pressure properties required by heavily loaded steel gears are provided by a thermally stable sulphurphosphorus additive. The oxidation inhibitor ensures a long and trouble free service life. This grease is fully compatible with ferrous and non-ferrous metals normally used in gear systems, and with conventional sealing materials.

 

APPLICATION
This grease finds extensive use in industrial spur, bevel, worm and helical enclosed gears. It has been designed to reduce leakage risk and to provide excellent shear stability, load-carrying ability and the 'coating' characteristics that eliminate the risk of dry start-up.
Spheerol FG 00 EP is approved for use by Bauer Esslingen, Opperman Gears and Electropower Gears Limited. It has a working range from -10 °C to 100 °C. The fill quantities stipulated by manufacturers recommending Spheerol FG 00 EP should be properly observed. In the absence of other instructions, the gear-box should be filled to the normal oil level, run under no-load conditions, then stopped and immediately topped-up to the level mark.

 

ADVANTAGES
• Reduced leakage of lubricant
• Elimination of dry start-up
• Suitable for a wide range of gearbox applications, irrespective of the attitude in which the gearbox is mounted
• Allow extended maintenance periods
• Reduced noise generation
• Excellent protection of gears against wear and corrosion.

Discover More +
Castrol Biotac EP 2 - Environmentally friendly Multipurpose EP Grease - 1601

Castrol Biotac EP 2 - Environmentally friendly Multipurpose EP Grease - 1601

 

Introduction

Castrol BioTac EP 2 is a grease based on a synthetic ester and a lithium/ calcium soap as thickener. It is a multipurpose lubricant formulated with a base oil which is readily biodegradable based on the OECD 301 B method.

 

Applications

Castrol BioTac EP 2 is suitable for the lubrication of both rolling and plain element bearings, as well as the general lubrication of mobile and fixed industrial equipment. It's biodegradability is of particular benefit where there is a risk of environmental contamination due to leakage in total loss lubrication systems.
This grease possesses a high degree of mechanical stability and highly effective water resistance. It also contains a specially selected system of additives to enhance corrosion protection, increase its resistance to oxidation and provide very good load carrying capability.
The inclusion of a synthetic base fluid enables good low temperature pumpability in central lubrication systems.
Recommended operating temperature range: -30 to +120 °C.

 

Benefits

  • Biodegradable. Ideal for applications where grease contamination of the environment may occurr
  • Very good low temperature pumpability
  • Excellent resistance to water.
  • Very good EP protection contributing to extended component life and reduced maintenance.
  • Biodegradable (> 80%) in CEC L-33-A-93
Discover More +
Castrol High Temperature Grease No.2 - Multipurpose High Temperature Grease - 16

Castrol High Temperature Grease No.2 - Multipurpose High Temperature Grease - 1604

 

Description

Castrol High Temperature Grease is a high performance, multipurpose lithium complex grease developed using an optimised combination of high quality mineral oil, proprietary thickener technology and a specially selected additive system enabling reliable performance across a wide range of temperatures whilst exposed to a variety of operational loads, speeds and environmental conditions.

 

Application

Castrol High Temperature Grease is intended for use in a wide range of plain and rolling element bearings within both the Automotive and Industrial markets, especially targeting those applications where upper operating temperatures are likely to exceed the limits of conventional, lithium thickened greases.
The excellent thermal and mechanical stability of Castrol High Temperature Grease make it particularly suitable for use in automotive bearing applications where rotational speeds may be higher or prolonged heavy braking may generate higher than normal hub temperatures. Specific examples may include cars fitted with disc brakes or commercial vehicles such as trucks or buses.
Castrol High Temperature Grease also offers good resistance to water and corrosion as well as very good load carrying performance making it suitable for general vehicle chassis lubrication or bearings on off-road construction vehicles where greater extremes of pressure may be prevalent.

 

Advantages

  • Excellent thermal and mechanical stability ensure prolonged product integrity across a wider operating temperature range, thus enabling extended relubrication intervals and reduced maintenance.
  • Good extreme pressure and anti-wear properties provide the potential for prolonged component life.
  • Good water resistance provides enhanced protection in applications where the potential for exposure and contamination are higher.
  • Good corrosion protection.
  • Excellent multipurpose potential enabling a reduction in product inventory.
Discover More +
Castrol Antifreeze NF - Antifreeze - 1735

Castrol Antifreeze NF - Antifreeze - 1735

 

Applications

Castrol Anti-freeze NF is a balanced formulation of mono ethylene glycol and corrosion inhibitors. Castrol Anti-freeze NF is a nitrite, phosphate and amine-free coolant containing ethylene glycol. It has been developed to meet the growing demand from manufacturers for a higher performance coolant that minimises environmental impact.
Aqueous solutions of Castrol Anti-freeze NF act as both an antifreeze and coolant and impart very good anti-corrosion protection to all metal parts found in the cooling systems of internal combustion engines.

 

Features / Benefits
Castrol Anti-freeze NF provides excellent protection against corrosion, and because it contains no phosphate, the problems of deposits in some modern performance engines are eliminated. In addition to providing excellent corrosion and low temperature protection, the use of the recommended level of anti-freeze will significantly reduce the likelihood of wet cylinder liner pitting due to " cavitation erosion".
Cavitation erosion is caused by the implosion of air bubbles present in the coolant and which are attracted to the liner outer surface. These
bubbles implode, resulting in the removal of minute amounts of liner material - this, if allowed to continue unchecked, will result in liner
porosity and severe engine damage.

 

Specifications / Performance

  • Mercedes Benz 325.2 and 325.0 (7700.00 and 7700.10/20)
  • Volkswagen TL-VW774C
  • MAN 324
  • MTU
  • Opel B040 0240 (meets requirements)
  • Volvo 128 6083 (meets requirements)
  • SAAB 6901 599 (meets requirements)
  • BMW N600 69.0 Approved
Discover More +
Castrol Radicool NF - Antifreeze coolant - 1751

Castrol Radicool NF - Antifreeze coolant - 1751

 

Castrol Radicool NF is an antifreeze concentrate formulated using monoethylene glycol and selected additives , free from nitrite, amine and phosphate inhibitors. It uses hybrid technology for the modern performance engines of cars and trucks. This coolant should be used at concentrations of between 33 % and 50% dilution with purified water to give optimum corrosion protection and freezing protection between -18°C and -36 °C.

 

Application

Castrol Radicool NF has been developed to meet the growing demand from engine and vehicle manufacturers for a higher performance coolant that minimises environmental impact. It provides excellent protection against corrosion, and because it contains no phosphate, the problems of deposits in some modern performance engines are eliminated. In addition to providing excellent corrosion and low temperature protection, the use of the recommended level of anti-freeze will significantly reduce the likelihood of wet cylinder liner pitting due to " cavitation erosion". Cavitation erosion is caused by the implosion of air bubbles present in the coolant and which are attracted to the liner outer surface. These bubbles implode, resulting in the removal of minute amounts of liner material - this, if allowed to continue unchecked, will result in liner porosity and severe engine damage.

 

Advantages:

  • Protects for up to 3 years
  • Excellent low temperature protection
  • Provides excellent protection against corrosion
  • Efficient lubrication of water pumps
  • Compatible with conventional seal and hose materials used in engine cooling systems
  • Contains bittering agent.
  • Has many OEM approvals


Also recommended against the following specifications
BMW N 600 6910
Opel/Vauxhall B040 0240
Volvo 1286083 Issue 002
Jenbacher TA-NR1000- 0201

In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using Castrol Radicool NF for the first time, ensure that the cooling system has been adequately flushed with clean water.

 

Pack sizes available - 20ltr, 208ltr barrels

Discover More +
Castrol ATF Dex II Multivehicle - Automatic Transmission Fluid - 1802

Castrol ATF Dex II Multivehicle - Automatic Transmission Fluid - 1802

 

Castrol ATF Dex II Multivehicle is an Automatic Transmission Fluid which may be used in automatic transmissions and power steering units of many types of vehicle where Dexron IID or Mercon performance is required. It is also approved for use in many european heavy duty automatic transmissions and Mercedes Benz manual transmissions.

Available in: 12x1L, 4x5L, 20L, 208L Drum, Bulk

 

  • Multiple approvals provide wide ranging use.
  • Ensures efficient operation of power steering units under all conditions.
  • High thermal stability protects against deposits and oil thickening prolonging the life of components and lubricant.
  • Enhanced friction characteristics and wear protection maintain effective operation of equipment.
  • Effective seal compatibility reduces the risk of leakages

 

Product Performance Claims:
MAN 339 Z1, V1
MB-Approval 236.6
Voith H55.6335.xx
Meets Ford Mercon
GM Dexron IID
ZF TE-ML 03D, 04D, 11A, 14A, 17C

Discover More +
Castrol Syntrax Universal 80W-90 - Universal fluid for manual transmissions and

Castrol Syntrax Universal 80W-90 - Universal fluid for manual transmissions and axles - 1823

 

Castrol Syntrax Universal 80W-90 is a part-synthetic SAE 80W-90 multipurpose manual transmission and final drive lubricant. It is particularly recommended for use in highly loaded final drives and differentials of commercial vehicles where API GL-5 performance is required and it carries a number of approvals. Additionally it may be used in synchronised manual transmissions requiring API GL-4 or GL-5 fluids.

 

Advantages:

  • A single product for transmissions and final drives reducing inventory and the potential for misapplication
  • High temperature stability gives superior performance and extended drain potential.
  • Proven performance as a problem solver in differentials operating in hot climates under arduous conditions.
  • Optimised synchroniser performance gives smooth gear shifting at all temperatures.
  • High shear stability maintains performance over the life of the lubricant.
  • Excellent wear protection particularly at high temperatures extends component life and reduces maintenance costs

 

Product Performance Claims:

  • API GL-4/GL-5
  • MAN 341 Typ E2 M 3343 Typ M
  • MB-Approval 235.0
  • Scania STO 1:0
  • ZF - TE-ML 02B
  • ZF - TE-ML 05A
  • ZF - TE-ML 12E
  • ZF - TE-ML 16C
  • ZF - TE-ML 17B
  • ZF - TE-ML 19B
  • ZF - TE-ML 21A

 

Pack sizes available - 20ltr, 208ltr, bulk delivery

Discover More +
Castrol Universal 75W-90 - Universal Fluid for manual transmissions and axles -

Castrol Universal 75W-90 - Universal Fluid for manual transmissions and axles - 1827

 

Castrol Universal 75W-90 is a multipurpose gear lubricant for use in both synchronised manual transmissions and final drives and differentials where either API GL-4 or API GL-5 are specified.

 

Advantages:

  • A single product for transmissions and final drives reducing inventory and the potential for misapplication
  • High temperature stability gives superior performance and extended drain potential.
  • Optimised synchroniser performance gives smooth gear shifting at all temperatures.
  • Excellent wear protection extends component life and reduces maintenance costs

 

Pack sizes available - 12x1ltr, 20ltr, 208ltr drums

Discover More +
Castrol Hypoy LS 85W140 - Automotive Limited Slip Gear Oil - 1846

Castrol Hypoy LS 85W140 - Automotive Limited Slip Gear Oil - 1846

 

Castrol Hypoy LS is a mineral oil based SAE 85W-140 extreme pressure gear lubricant designed to cope with the special friction characteristics of limited slip differentials and associated hypoid gears.

 

Application

Castrol Hypoy LS has been particularly developed for use in limited slip rear axles fitted to high performance cars.

 

Hypoy LS can be used where the following performance standards are specified:

  • API Service GL5

 

Pack sizes available - 208ltr drums

Discover More +
Castrol Syntrans 75W-85 - Manual Transmission Fluid - 1866

Castrol Syntrans 75W-85 - Manual Transmission Fluid - 1866

 

Castrol Syntrans 75W-85 is a full synthetic transmission fluid recommended for most commercial vehicle manual transmissions (truck, bus, light commercial vehicle) where API GL-4 lubricants are required. These transmissions are generally larger and subjected to higher loads and temperatures than those in passenger cars: this product was developed for these particular requirements and is approved by a number of manufacturers.

 

  • Excellent thermal and oxidative stability maintains transmission cleanliness and lubricant performance allowing extended drain capability.
  • Synthetic formulation provides a reduction in operating temperatures giving longer component and lubricant life.
  • Superb cold flow characteristics give smoother gear shifts at low temperatures.
  • High shear stability maintains lubricant performance throughout the drain interval.
  • Good wear and EP performance ensures component protection under high load conditions reducing downtime and service costs.

 

Product Performance Claims:
API GL-4
MAN 341 E4
MB-Approval 235.4
Volvo 97307
Eaton 500,000km drain Europe (service bulletin 2273)

 

Pack sizes available - 20ltr

Discover More +
Castrol EPX 85W-140 - Automotive Gear Oils - 1894

Castrol EPX 85W-140 - Automotive Gear Oils - 1894

 

Castrol EPX 85W-140 are extreme pressure multigrade gear oils which are based upon highly refined mineral oils and incorporate extreme pressure additives, corrosion and oxidation inhibitors and anti-foam agents.

 

Application

Developed for the lubrication of spiral bevel and hypoid differentials, they are also suitable for the lubrication of manual transmissions where the manufacturer recommends the use of an oil to API GL5 performance level.

 

Advantages:

  • Load carrying performance to API GL5
  • Provides excellent protection to gears operating under the most severe service conditions
  • Multigrade characteristics give wide operating temperature range
  • Benefits in low temperature performance

 

PERFORMANCE:
API Service Level GL5
ZF TE-ML 01/05/07 (Page 2) Approved

 

Pack sizes available - 20ltr

Discover More +
Castrol Manual EP 80W-90 - Manual Transmission Fluid - 1896

Castrol Manual EP 80W-90 - Manual Transmission Fluid - 1896

 

Castrol Manual EP 80W-90 is a mineral based fluid suitable for use in applications where API GL-4 performance is required. Approved for use in ZF manual transmissions.

 

  • High thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission.
  • Good antiwear and load carrying characteristics extend the life of components.

 

Product Performance Claims:
API GL-4
ZF TE-ML 02B, 16A, 17A, 19A

 

Pack sizes available - 12x1ltr, 20ltr, 208ltr drums

Discover More +
Castrol Manual EP 80W - Manual Transmission Fluid - 1897

Castrol Manual EP 80W - Manual Transmission Fluid - 1897

 

Castrol Manual EP 80W is a mineral based fluid suitable for use in applications where API GL-4 performance is required. Manual EP 80W is approved for use in MB transmissions used in light commercial vehicles and trucks and also approved for use in ZF manual transmissions.

 

Advantages:

  • Wide range of european OEM approvals.
  • High thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission.
  • Good antiwear and load carrying characteristics extend the life of components.

 

Product Performance Claims:
API GL-4
MAN 341 Z1, E1
MB-Approval 235.1
ZF - TE-ML 02B, 17A

 

Pack sizes available - 12x1ltr, 20ltr

Discover More +
Castrol Tection T 15W-40 - 2015

Castrol Tection T 15W-40 - 2015

 

Castrol Tection T 15W-40 is a premium mixed fleet engine oil recommended for use in American, European and Japanese engines with diesel and gasoline fuels.

 

Application

Castrol Tection T 15W-40 was primarily designed to protect all engines operating in the tough off-highway environment. Its excellent soot-handling properties prevent premature wear and allow extended oil drain intervals.

 

 

Castrol Tection T has been designed using advanced technology additives and specially selected fluids to provide real user benefits such as :-

  • Excellent soot-handling properties prevent premature engine wear & allow maximum engine life.
  • Optimum wear and bore polish control.
  • Extended drain intervals provide lower operational & servicing costs.
  • Engine deposits are controlled by proven Castrol technology.
  • Suitable for all engines in the tough off-road environment.
  • European & U.S. OEM's approvals demonstrate product versatility.
  • May be used in some Allison transmissions.

 

Product performance claims:

ACEA E3/E5/B4
API CH-4/CF/SJ
Mercedes Benz 228.3
MAN M3275
Volvo VDS-2
N.B. Not for use in Detroit Diesel 2-Cycle engines
RVI RD
Cummins CES 20071, 72, 76, 77
MTU Type 2
Mack EO-M
Meets DAF requirements

 

Pack sizes available - 20ltr, 208ltr, 1000ltr IBC, Bulk delivery

Discover More +
Castrol Enduron 10W-40 - 2017

Castrol Enduron 10W-40 - 2017

 

Maximum oil drain & protection for diesel engines

Castrol Enduron is a 10W-40 heavy duty diesel engine oil designed to allow fleet operators to run their vehicles to maximum oil drain intervals.

 

Application

Its primary application is for the latest Euro 4*, Euro 3 and Euro 2 European trucks and buses. It can also be used in offroad vehicles and equipment that require this performance level.
*Not for use in Euro 4 vehicles requiring low SAPS lubricants. For this application we recommend Castrol Enduron Low SAPS.

 

 

Castrol Enduron 10W-40 uses advanced technology to provide excellent engine protection when used at maximum oil drain intervals, even under severe operating conditions. User benefits include:

  • Maximum oil drain intervals to keep vehicles on the road for longer. The extra-strong additive system in Castrol Enduron 10W-40 keeps on working even in the toughest conditions. OEMs have approved Castrol Enduron 10W-40 for use at their maximum oil drain intervals.
  • Engine protection, even when soot and other contaminants are present. Castrol Enduron 10W-40 protects against all types of engine wear, deposit build-up and bore-polishing. Its advanced formulation continues to protect even under the most severe conditions so extending engine life and preventing unscheduled downtime.

 

Product Performance Claims:
ACEA E4, E5, E7
API CF
MAN M 3277
MB-Approval 228.5
RVI RXD
Volvo VDS-3
Meets DAF extended drain requirements

 

Pack sizes available - 20ltr, 208ltr drums, Bulk delivery

Discover More +
Castrol RLX Super 40 - Monograde diesel engine lubricant - 2050

Castrol RLX Super 40 - Monograde diesel engine lubricant - 2050

 

Castrol RLX Super 40 is a 5th Generation (LMOA) zinc and chlorine free engine crankcase lubricant which has been specifically designed for the lubrication of diesel propulsion, diesel electric and stationary power generation installations where a zinc-free lubricant is specified.

 

Application

Castrol RLX Super 40 is formulated to meet the requirements of engines manufactured by General Motors Electromotive Division (GM-EMD), General Electric (GE) and ALCO. This grade is suitable for all engines fitted with silver bearings, particularly those used in Marine and Offshore power generation sets.

 

Advantages:

  • Optimum balance of detergency and dispersancy reduces ring sticking and engine deposits, resulting in cleaner engines that maximise operating performance. With extended oil drain intervals, engine downtime is further reduced.
  • Selected additive system provides excellent protection against wear and acid corrosion resulting in increased engine component life.
  • Exceeds detergency requirements of API CF and CF-2.
  • High viscosity index base oil allows control of oil consumption and maintains excellent oil film between bearings at high operating temperatures.
  • Castrol RLX Super 40 is fully compatible with other 5th generation (LMOA) lubricants.

 

Approval Status:
API CF / CF-2
Conforms to the requirements of `Generation 5` for GM-EMD and `Generation 4LL` for GE.
Meets the oil recommendations for Caterpillar 3600 series engines. Suitable for all ALCO engines.

 

Pack sizes available - 1000ltr IBC, Bulk delivery

Discover More +
Castrol Tection 15W-40 - Protection for mixed fleet diesel engines - 2018

Castrol Tection 15W-40 - Protection for mixed fleet diesel engines - 2018

 

Castrol Tection is a 15W-40 mixed fleet diesel engine oil designed to provide excellent protection for fleets containing vehicles from a variety of manufacturers.

 

Application

The primary application for Castrol Tection 15W-40 is in Euro 3, and earlier, European technology vehicles and in US technology vehicles. Castrol Tection 15W-40 is a versatile product which can be used in trucks, buses, LCVs, off-road vehicles and equipment, and also in agricultural vehicles.

 

 

Castrol Tection 15W-40 provides excellent protection for a wide variety of engine makes, so is an excellent choice for on and off-road fleets which contain different vehicle types.
User benefits include:

  • Excellent protection for European and US technology engines. Castrol Tection 15W-40’s versatile formulation provides protection against wear and deposits, ensuring reduced maintenance costs and preventing unscheduled downtime.
  • Reduced inventory. Because Castrol Tection 15W-40 is a versatile product, mixed fleets need to stock only one engine oil.
  • Extended oil drain intervals. Castrol Tection 15W-40 is approved by OEMs for use at extended drain intervals, so reducing downtime and servicing costs.

 

Product Performance Claims:
ACEA E3, E5, E7
API CH-4
Cummins CES 20.076, 20.077
Mack EO-M Plus
MB-Approval 228.3
RVI RLD
Volvo VDS-2
MAN M 3275
Meets DAF standard drain requirements

 

Pack sizes available - 4x5ltr, 20ltr, 208ltr, 1000ltr IBC, Bulk delivery

Discover More +
Castrol Tection DD Monograde 40 - Diesel engine oil - 2229

Castrol Tection DD Monograde 40 - Diesel engine oil - 2229

 

Castrol Tection DD Monograde 40 is a high performance trunk piston diesel engine lubricant, especially formulated to meet the latest performance requirements for General Motors Detroit Diesel 2-stroke engines operating with distillate fuels of up to 0.5% sulphur content. Castrol Tection DD Monograde 40 is a blend of high quality paraffinic base oils inhibited against oxidation and corrosion and combined with detergent, dispersant and anti-wear additives. This combination ensures minimum deposit formation on pistons, combustion chambers and exhaust valves, reduces mechanical and corrosive wear and provides protection against high and low temperature sludge formation, oxidation and rusting. Castrol Tection DD Monograde 40 conforms to the API CF-2 performance specification. The low ash additive technology utilised in the formulation of Castrol DD 40 comfortably meets the Detroit Diesel level of 0.8% maximum required for the 149 series engine.

 

Application

  • Main Power Generation.
  • Emergency generators.
  • Auxiliary engines in Cranes, Firewater pumps etc.

 

Performance Levels & OEM Approvals:
Exceeds API Service Categories : CF/CF-2, CD-2.
General Motors Corp. (Detroit Diesel Div.).

 

Pack sizes available - 208ltr drums, bulk delivery

Discover More +
Castrol Tection Global 15W-40 - 2231

Castrol Tection Global 15W-40 - Protection for mixed fleets with latest European, US and Japanese diesel engines - 2231

 

Castrol Tection Global is a 15W-40 mixed fleet diesel engine oil designed to provide excellent protection for fleets containing vehicles from a variety of manufacturers.

Available in: 20L, 208L drum, 1000L IBC, Bulk

 

Application

Castrol Tection Global's primary application is in Euro 4* and Euro 3 European technology vehicles, in US technology vehicles and in Japanese technology vehicles. Castrol Tection Global 15W-40 is a truly versatile product which can be used in trucks, buses, LCVs, off-road vehicles and equipment and also in agricultural vehicles. * Not for use in Euro 4 vehicles requiring low SAPS lubricants. For this application we recommend Castrol Enduron Low SAPS. Castrol Tection Global 15W-40 provides excellent protection for a wide variety of engine makes, so is the first choice for on and off-road fleets which contain different vehicles types.

 

 

User benefits include:

  • Excellent protection for European, US and Japanese technology engines. Castrol Tection Global 15W-40's versatile formulation provides protection against wear and deposits, ensuring reduced maintenance costs and preventing unscheduled downtime.
  • Reduced inventory, Castrol Tection Global 15W-40 is so versatile, mixed fleets need to stock only one engine oil.
  • Extended oil drain intervals. Castrol Tection Global 15W-40 is approved by OEMs for use at extended drain intervals, so reducing downtime and servicing costs.

 

Product Performance Claims:
ACEA E3, E5, E7
API CF/CI-4
Global DHD-1, CAT ECF-2, RVI RLD, Volvo VDS-3
Cummins CES 20.076, 20.077, 20.078
Mack EO-M Plus
MB-Approval 228.3
MAN M 3275
Meets DAF requirements

Discover More +
Castrol Tection Medium Duty 15W-40 - 2232

Castrol Tection Medium Duty 15W-40 - Protection for older diesel engines and light / medium duty operations - 2232

 

Castrol Tection Medium Duty is a 15W-40 diesel engine oil, primarily recommended for older commercial vehicles and those running under light to moderate operating conditions.

 

Application

Castrol Tection Medium Duty 15W-40 can be used in turbo-charged or normally aspirated trucks, buses, LCVs, off-road vehicles & equipment and agricultural vehicles.

 

 

User benefits include:

  • Castrol Tection Medium Duty 15W-40 is formulated to reduce many types of wear and also reduce the build-up of deposits, so maintenance costs are controlled and unscheduled downtime is prevented.
  • Castrol Tection Medium Duty 15W-40 is approved by OEMs for use at standard drain intervals

 

Product Performance Claims:
ACEA E2
API CG-4
MAN 271
MB-Approval 228.1
Volvo VDS

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Castrol Alpha SP 68 - Industrial Extreme Pressure Gear Oil - 3181

Castrol Alpha SP 68 - Industrial Extreme Pressure Gear Oil - 3181

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 100 - Industrial Extreme Pressure Gear Oil - 3182

Castrol Alpha SP 100 - Industrial Extreme Pressure Gear Oil - 3182

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 150 - Industrial Extreme Pressure Gear Oil - 3183

Castrol Alpha SP 150 - Industrial Extreme Pressure Gear Oil - 3183

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 220 - Industrial Extreme Pressure Gear Oil - 3184

Castrol Alpha SP 220 - Industrial Extreme Pressure Gear Oil - 3184

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 320 - Industrial Extreme Pressure Gear Oil - 3185

Castrol Alpha SP 320 - Industrial Extreme Pressure Gear Oil - 3185

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 460 - Industrial Extreme Pressure Gear Oil - 3186

Castrol Alpha SP 460 - Industrial Extreme Pressure Gear Oil - 3186

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 680 - Industrial Extreme Pressure Gear Oil - 3187

Castrol Alpha SP 680 - Industrial Extreme Pressure Gear Oil - 3187

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Outboard 2T - Formulated for 2-stroke outboard engines - 3802

Castrol Outboard 2T - Formulated for 2-stroke outboard engines - 3802

 

Castrol Outboard 2T is a modern lubricant for 2-stroke outboard engines. Formulated with selected mineral base stocks and high performance additive, Castrol Outboard 2T will deliver maximum level of protection in the most demanding conditions.

 

Application

Castrol Outboard 2T can be used in a wide range of outboard engines, with autolube system or premix, where NMMA TCWII or TCW3 oil is called for. It can be mixed with leaded and unleaded gasoline up to a 100:1 ratio, accordingly to manufacturer’s recommendation.

 

 

User benefits include:

  • Provides superior control of carbon deposits for constant engine performance over time.
  • Protects from high speed wear and scuffing for prolonged engine life.
  • Prevents ash build up in combustion chamber and piston crown, reducing the risk of pre-ignition.
  • Ensures maximum protection against salt water corrosion.
  • Keeps plugs clean: allows ready and easy cold starts.
  • Has excellent low temperature fuel miscibility.

 

Product Performance Claims:
NMMA - TC-W3

 

Pack sizes available - 12x1ltr, 20ltr

Discover More +
Castrol Seamax Super Plus 15W-40 - Multigrade diesel engine lubricant - 5013

Castrol Seamax Super Plus 15W-40 - Multigrade diesel engine lubricant - 5013

 

Seamax Super Plus 15W-40 is a mineral based Super High Performance Diesel engine oil specifically selected to meet the lubrication demands of fishing vessels.

Available in 208L drums.

 

Application

Seamax Super Plus 15W-40 is suitable for use in turbocharged and naturally aspirated engines operating on both gasoline or marine gas oil. It gives easy cold start and efficient engine lubrication at low temperatures, as well as optimum protection at high temperatures, without increasing oil consumption.

 

 

User benefits include:

  • Superior soot dispersancy.
  • Cleaner and more efficient operation.
  • Reduced maintenance.
  • Excellent oil consumption control.
  • Prevention against formation of harmful engine deposits.
  • Excellent protection under conditions of extended drain.
  • Good viscosity control.

 

Approval Status:

Seamax Super Plus 15W-40 meets the requirements of API CH-4 and ACEA E3/E5.

Discover More +
Castrol MHP 153 - Diesel engine lubricants - 5022

Castrol MHP 153 - Diesel engine lubricants - 5022

 

MHP 153 and 154 are high performance lubricants specifically developed for use in modern highly rated marine and power generation four-stroke engines operating on distillate fuels.

Available in: 208L Drums, Bulk

 

Application

MHP is suitable for use in medium to highly-rated marine trunk piston engines operating with ISO 8217 type DMA/DMZ/DMB/RMA10 fuels and require API CF performance. MHP has high load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.

 

 

User benefits include:

  • Enhanced detergency, excellent thermal and oxidative stability.
  • Enhanced performance at high temperatures.
  • High load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.
  • Cleaner piston ring belts.
  • Excellent engine cleanliness.
  • Reduced maintenance and wear.
  • Improved resistance to liner lacquering.
  • Extended time between overhauls.

 

Approval Status:

MHP exceeds the specifications of API CF and is fully approved by major marine engine makers worldwide.

Discover More +
Castrol MHP 154 - Diesel engine lubricants - 5023

Castrol MHP 154 - Diesel engine lubricants - 5023

 

MHP 153 and 154 are high performance lubricants specifically developed for use in modern highly rated marine and power generation four-stroke engines operating on distillate fuels.

Available in: 208L Drums, Bulk

 

Application

MHP is suitable for use in medium to highly-rated marine trunk piston engines operating with ISO 8217 type DMA/DMZ/DMB/RMA10 fuels and require API CF performance. MHP has high load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.

 

 

User benefits include:

  • Enhanced detergency, excellent thermal and oxidative stability.
  • Enhanced performance at high temperatures.
  • High load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.
  • Cleaner piston ring belts.
  • Excellent engine cleanliness.
  • Reduced maintenance and wear.
  • Improved resistance to liner lacquering.
  • Extended time between overhauls.

 

Approval Status:

MHP exceeds the specifications of API CF and is fully approved by major marine engine makers worldwide.

Discover More +
Castrol HLX 40 - Diesel engine lubricants - 5049

Castrol HLX 40 - Diesel engine lubricants - 5049

 

HLX 40 is a Super High Performance Diesel (SHPD) lubricant, specially formulated to meet the latest performance requirements of marine monograde lubricant specifications, allowing extended drain periods to effectively compete with performance normally associated with synthetic oils. HLX uses premium additive technology blended in high quality, high viscosity index base oils. It provides superior detergency and excellent thermal and oxidative stability required to lubricate today's most severe diesel engine applications.

Available in: 208L, 1000L IBC, Bulk

 

Application

HLX, positioned at the top of the Castrol range of mineral based lubricants, is formulated for use in very highly rated high speed marine and power generation diesel engines that use distillate fuel with sulphur from zero up to 1% and require extreme performance. It is particularly suitable for high power density applications such as fast ferries.

 

 

User benefits include:

  • Extended oil drain intervals.
  • Excellent high temperature performance.
  • Superior resistance to bore polishing.
  • Improved lacquer resistance.
  • Synthetic performance in a mineral oil.

 

Approval Status:

HLX 40 is approved by all the major OEM's, including approval as a `Type 2` MTU monograde lubricant, that allows drain intervals to be doubled over standard marine oils.
HLX additive technology exceeds API CF and ACEA E3 - tested to MB 228.2, MAN M3275 and Volvo VDS-2.

Discover More +
Castrol Coral 2 - Stern tube oil - 5082

Castrol Coral 2 - Stern tube oil - 5082

 

Coral 2 stern tube oil is designed to readily emulsify with seawater thus providing certain advantages over oils selected for demulsibility in a wet environment. Firstly, oil/water emulsions provide a higher viscosity fluid than neat oils thus minimising oil loss or water ingress. Secondly, by sustaining an oil/water emulsion, corrosion from separated seawater, which can occur in a statically loaded stern tube bearing, is avoided.

 

Application

This grade has given satisfactory service in stern tubes employing a wide variety of seals including Cedervall, Chuetsu - Waukesha, and Simplex Compact Seals. Coral 2 has other applications in the marine environment, including the use in fin stabilisers and propeller hubs.

 

 

User benefits include:

Blended from selected mineral oils compounded with a natural emulsifer, this lubricant gives a stable high viscosity emulsion and good rust protection.

 

Approval Status:

Approved by most major manufacturers of stern tube systems.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Castrol Hyspin AWS 15 - Antiwear Hydraulic Oils - 6016

Castrol Hyspin AWS 15 - Antiwear Hydraulic Oils - 6016

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 22 - Antiwear Hydraulic Oils - 6017

Castrol Hyspin AWS 22 - Antiwear Hydraulic Oils - 6017

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 32 - Antiwear Hydraulic Oils - 6018

Castrol Hyspin AWS 32 - Antiwear Hydraulic Oils - 6018

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 46 - Antiwear Hydraulic Oils - 6019

Castrol Hyspin AWS 46 - Antiwear Hydraulic Oils - 6019

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 68 - Antiwear Hydraulic Oils - 6020

Castrol Hyspin AWS 68 - Antiwear Hydraulic Oils - 6020

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 100 - Antiwear Hydraulic Oils - 6021

Castrol Hyspin AWS 100 - Antiwear Hydraulic Oils - 6021

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 150 - Antiwear Hydraulic Oils - 6022

Castrol Hyspin AWS 150 - Antiwear Hydraulic Oils - 6022

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin HVI 46 - High viscosity index anti-wear hydraulic oils - 6036

Castrol Hyspin HVI 46 - High viscosity index anti-wear hydraulic oils - 6036

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +
Castrol Hyspin HVI 22 - High viscosity index anti-wear hydraulic oils - 6037

Castrol Hyspin HVI 22 - High viscosity index anti-wear hydraulic oils - 6037

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +
Castrol Hyspin HVI 32 - High viscosity index anti-wear hydraulic oils - 6038

Castrol Hyspin HVI 32 - High viscosity index anti-wear hydraulic oils - 6038

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +
Castrol Hyspin HVI 68 - High viscosity index anti-wear hydraulic oils - 6039

Castrol Hyspin HVI 68 - High viscosity index anti-wear hydraulic oils - 6039

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +
Castrol Hyspin HVI 100 - High viscosity index anti-wear hydraulic oils - 6040

Castrol Hyspin HVI 100 - High viscosity index anti-wear hydraulic oils - 6040

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +
Castrol Carelube HES 46 - Biodegradable ester based hydraulic oil - 6099

Castrol Carelube HES 46 - Biodegradable ester based hydraulic oil - 6099

 

Synthetic ester-based fluid with biodegradable properties, for use in environmentally sensitive areas. HES 15 can also be used as a spindle oil.

 

DESCRIPTION
The Castrol Carelube™ HES hydraulic oil range are based on carefully selected synthetic esters, which are highly biodegradable and recommended for use in situations where leakage or spillage may present a risk of harm to the environment.

 

APPLICATION

The Carelube HES range is used as a hydraulic oil for applications in environmentally sensitive areas such as; near or on waterways, and in the agriculture, forestry, mining and construction industries.
The range may also be used for machine tool hydraulic systems where ester based soluble cutting fluids are being utilised and minimisation of impact of contamination is required.
Carelube HES range is miscible with conventional mineral oil-based hydraulic fluids and products based on natural esters but, in order to maximise the performance benefits of these products - both physically and environmentally, either through draining or flushing to minimise residues of other lubricants is recommended.
This range is fully compatible with the elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

 

Carelube HES is classified as follows:

  • ISO 6743/4 - Hydraulic Oils Type HEES
  • Carelube HES grades meet the requirements (for appropriate viscosity grade) of:
  • ISO DIS 15380
  • VDMA 24568
  • Komatsu G3/G4

 

ADVANTAGES

  • Inherently biodegradable so ideally suited for minimising the impact to the environment should leakage occur (note: local legislation/regulations regarding the clean up of oil leakage/spills should always be followed).
  • Environmentally friendly with low aquatic toxicity – rated WGK 1.
  • Very high viscosity index gives reliable operation and consistent response across wide temperature ranges. Maximum component protection at cold start-up and at elevated temperatures.
  • Excellent anti-wear performance and lubricity maximises component life and ensures system reliability.
  • Seal, diaphragm and hose material compatibility similar to that of mineral oil, allowing easy changeover without component modification.

 

ADDITIONAL INFORMATION
The Carelube HES range is miscible and compatible with nearly all mineral oil and ester type hydraulic fluids. To convert a system using these types of oils, simply drain and recharge with correct Carelube HES viscosity grade.
Biodegradability CEC-L-33-A-93 > 95 %
Biodegradability OECD 301B > 69 %

 

ISO Viscosity and pack sizes available:
CARELUBE HES 46 - 20L, 208L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 15 - Hydraulic systems - 6152

Castrol Hyspin AWH-M 15 - Hydraulic systems - 6152

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.

 

Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 32 - Hydraulic systems - 6154

Castrol Hyspin AWH-M 32 - Hydraulic systems - 6154

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 46 - Hydraulic systems - 6155

Castrol Hyspin AWH-M 46 - Hydraulic systems - 6155

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 68 - Hydraulic systems - 6156

Castrol Hyspin AWH-M 68 - Hydraulic systems - 6156

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 100 - Hydraulic systems - 6157

Castrol Hyspin AWH-M 100 - Hydraulic systems - 6157

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Hyspin AWH-M 150 - Hydraulic systems - 6158

Castrol Hyspin AWH-M 150 - Hydraulic systems - 6158

 

Castrol Hyspin™ AWH-M hydraulic oils are mineral oil based anti-wear hydraulic fluids which incorporate viscosity index improvers in order to enhance their viscosity - temperature performance for use in environments which are subject to low or widely variable temperatures. The high viscosity index can also allow a degree of rationalisation of hydraulic fluids across different equipment in order to reduce the number of lubricants carried on board.

 

Application

Castrol Hyspin AWH-M contains a shear stable VI which helps maintain the viscosity characteristics of the product over a wide range as well as through prolonged use. Utilising, the same additive system, as described for the Hyspin AWS product range, means that Hyspin AWH-M exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent stability in the presence of water and separates rapidly from such contamination upon standing.


Advantages

  • High viscosity index = Reduced viscosity variation over the operational temperature range. Better pumping characteristics, helps the system run at an optimum
  • Excellent anti-wear performance = Reduced down-time due to unscheduled maintenance. Savings from reduced replacement part costs
  • Outstanding oxidative stability = Longer oil operating life due to overall reduction in lubricant costs and used oil disposal costs
  • Superior hydrolytic stability = Lubricant performance even in the presence of contaminating water
  • Outstanding protection against corrosion = Total operational confidence even in the most arduous of conditions. Cleaner system with cost reductions in filter changes
  • Excellent water separation = Reduced down-time, prolonged lubricant life

 

OTHER INFORMATION:
Hyspin AWH-M conforms to ISO Grade HV, DIN.51524, Part 3, Class HVLP (+).
Seal Compatibility - Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.

 

ISO Viscosity and pack sizes available:
HYSPIN AWH-M 15 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 32 - 20L, 208L & Bulk delivery
HYSPIN AWH-M 46 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 68 - 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWH-M 100 - 20L & 208L
HYSPIN AWH-M 150 - 20L
HYSPIN AWH-M 32 SUPERCLEAN - 20L, 1000L IBC & Bulk delivery

Discover More +
Castrol Biobar 46 - Environmentally responsible hydraulic fluids - 6173

Castrol Biobar 46 - Environmentally responsible hydraulic fluids - 6173

 

The Castrol BioBar range of high specification hydraulic oils are intended as drop-in replacements for conventional mineral oils in equipment where there is a risk of accidental spillage or leakage and consequent environmental pollution. Hydraulic systems are found throughout an offshore installation - on cranes, drill floor power units and hydraulic ring mains and are often located where leakage or spillage can escape into the marine environment. High flow rates, high operating pressures and extensive use of flexible hoses combine to make these systems vulnerable to rapid loss of fluid caused by chafe or mechanical damage.

Castrol BioBar contains selected additives ensuring good oxidation stability, good anti-corrosion and anti-wear properties and low aquatic toxicity. The combination of base oils used in Castrol BioBar endows it with a very high viscosity index and an extremely low pour point as well as giving excellent compatibility with elastomeric seal materials. The careful choice of the saturated synthetic ester enables the product to operate up to +120ºC system temperature.

The product level biodegradability of Castrol BioBar was measured in an extended OECD 306 (seawater) biodegradation test with a result greater than 60%, making it 100% more biodegradable than conventional mineral oils. This ensures its biodegradation should it enter the marine environment. The toxicity of Castrol BioBar was measured on 6 marine species and was found to be 100 times less toxic than conventional mineral oils. It also has > 50% less potential for bioaccumulation and > 30% of Castrol BioBar is derived from renewable sources.

Castrol BioBar is miscible with conventional mineral oil based hydraulic fluids. When changing from mineral oil based products to Castrol BioBar, the system should be drained to ensure that the mineral oil content of the refilled system is less than 5%. This is necessary to ensure that the maximum environmental benefit can be achieved.

 

Application

Hydraulic systems and hydrostatic transmissions incorporating gear pumps, vane pumps, radial piston or axial piston pumps and motors where there is a perceived risk of ingress into the environment in the event of spillage or leakage.

 

Benefits

Castrol BioBar hydraulic fluids combine excellent protection, extended drain performance and versatility in Offshore operations to provide the following key benefits:

  • High biodegradability, reduced bioaccumulation potential and low toxicity in comparison with conventional mineral oils to minimise environmental impact in the event of spillage or leakage.
  • Good oxidation and hydrolytic stability.
  • High shear stability.
  • Compatible with all common seal materials (Nitrile, Viton, HNBR) allowing simple replacement of mineral oil in hydraulic systems.
  • Exceeds the requirements of the Eaton-Vickers 35VQ25 pump test.

 

Available in: 20L, 208L drums

Discover More +
Castrol Spheerol AP 3 - Multi-purpose grease - 9003

Castrol Spheerol AP 3 - Multi-purpose grease - 9003

 

Castrol Spheerol AP 3 is a lithium soap thickened grease incorporating solvent-refined base oils. It is a water resistant grease and contains oxidation and corrosion inhibitors, which help to ensure long service life and a high level of protection for metal surfaces.

 

Application

Spheerol AP 3 is mainly intended for use in plain and roller bearings of all types and in all kinds of machinery under normal load conditions and within an operating temperature range of -20 deg C to +120 deg C. It is also suitable in roller bearings of electric motors where a lithium based grease of a base oil viscosity around 100-120 cSt at 40 deg C is required.

 

Advantages:

  • Corrosion inhibitor additives ensure protection of metal surfaces extending bearing life.
  • Oxidation inhibitors extend the life of the grease in high temperatures applications minimising the need for regreasing.

 

Pack sizes available - 12x400g Cartridges, 18kg Keg

Discover More +
Castrol Spheerol SX 2 - Calcium Complex Grease - 9098

Castrol Spheerol SX 2 - Calcium Complex Grease - 9098

 

Castrol Spheerol SX 2 is a calcium complex, extreme pressure grease specifically developed to provide a high degree of resistance to water wash and to provide protection to components in wet environments.

 

Application

Castrol Spheerol SX 2 is suitable for use in bearings with shaft speeds up to 3000 rpm and at temperatures up to 140ºC. It also offers a high level of protection and lubrication for wire ropes and its resistance to water wash-out makes it the preferred choice for mill roll and machine tool bearings subject to flooding by coolants.

 

Advantages:

  • Strong adhesion to metal surfaces
  • High resistance to sea water & fresh water wash out
  • Excellent corrosion protection
  • Wide operating temperature range (-20ºC to 140ºC)
  • Contains no solvents, metals or other harmful constituents
  • Long term stability with no premature hardening

 

Pack sizes available - 12x400g Cartridges, 18kg Can

Discover More +
Castrol Transaqua HT - Water-based subsea production control fluid - 155DF1

Castrol Transaqua HT - Water-based subsea production control fluid - 155DF1

 

Castrol Transaqua™ HT is a water-based hydraulic control fluid specifically formulated for use as the control medium in subsea production control systems. The fluid incorporates all the features required for operation throughout the control system including Sub Surface Safety Valves (SSSV) and intelligent well completions. Transaqua HT has been developed and qualified under a Quality Management System with ISO 9001 Certification for Research and Development. Qualification testing carried out in accordance with ISO 13628-6 Annex C (2006 E) requirements.

 

Application:

  • Designed for use in all conventional and high pressure, high temperature applications (according to API 17 TR8).
  • Can operate over a temperature range of -30ºC (-22ºF) to 180ºC (356ºF).
  • Suitable for use within Electro-Hydraulic Multiplex (EH-Mux) or direct hydraulic control systems.
  • Designed for use throughout the entire production and workover control systems, covering Topsides and Subsea applications: both open water and well bore; and Downhole from control of a single SSSV through to complex intelligent well completions.

 

Advantages:

  • Tested according to OSPAR requirements. Rigorous environmental testing has also been completed in many geographies worldwide.
  • Contains a fluorescent leak tracer to allow rapid detection of subsea leaks either visually or using a dedicated ROV mountable leak detection sensor.
  • Maintains corrosion performance with seawater contamination.
  • Tolerant of the high well temperatures encountered by those parts of the control system located at the well bore.
  • Fully compatible and miscible in all proportions with other products in the Castrol Transaqua range and most other water-based subsea control fluids.
  • Compatible with a wide range of materials commonly used in subsea control systems (see Tables 3 & 4). More detailed compatibility information is available on request.

 

Pack sizes available - 208ltr drums

Discover More +
Castrol Transaqua HT2 - Water-based subsea production control fluid - 155EA1

Castrol Transaqua HT2 - Water-based subsea production control fluid - 155EA1

 

Castrol Transaqua™ HT2 is a water-based hydraulic control fluid specifically formulated for use as the control medium in subsea production control systems. The fluid incorporates all the features required for operation throughout the control system including Sub Surface Safety Valves (SSSV) and intelligent well completions. Transaqua™ HT2 has been developed and qualified under a Quality Management System with ISO 9001:2000 Certification and an Environmental Management System with ISO 14001:2004 Certification for Research and Development. Qualification testing carried out in accordance with ISO 13628-6 Annex C (2006 E) requirements.

 

Application:

  • Designed for use in all conventional and high pressure, high temperature applications (according to API 17 TR8).
  • Can operate over a temperature range of -30ºC (-22ºF) to 180ºC (356ºF).
  • Suitable for use within Electro-Hydraulic Multiplex (EH-Mux) or direct hydraulic control systems.
  • Designed for use throughout the entire production and workover control systems, covering Topsides and Subsea applications: both open water and well bore; and Downhole from control of a single SSSV through to complex intelligent well completions.

 

Advantages:

  • Tested according to OSPAR requirements and is registered for use offshore in the UK, Netherlands and Norway. Rigorous environmental testing has been completed in many geographies worldwide.
  • Has an identical formulation to the field proven Castrol Transaqua HT with a replacement dye and ultra violet tracer.
  • Contains a leak tracer to allow rapid detection of subsea leaks either visually or using a dedicated ROV mountable leak detection sensor.
  • Maintains corrosion performance with seawater contamination.
  • Tolerant of the high well temperatures encountered by those parts of the control system located at the well bore.
  • Fully compatible and miscible in all proportions with other products in the Castrol Transaqua range and most other water-based subsea control fluids.
  • Compatible with a wide range of materials commonly used in subsea control systems (see Tables 3 & 4). More detailed compatibility information is available on request.

 

Pack sizes available - 208ltr drums

Discover More +