Kernow Oils - Lubricant Solutions

Marine

Castrol Seamax Super Plus 15W-40 - Multigrade diesel engine lubricant - 5013

Castrol Seamax Super Plus 15W-40 - Multigrade diesel engine lubricant - 5013

 

Seamax Super Plus 15W-40 is a mineral based Super High Performance Diesel engine oil specifically selected to meet the lubrication demands of fishing vessels.

Available in 208L drums.

 

Application

Seamax Super Plus 15W-40 is suitable for use in turbocharged and naturally aspirated engines operating on both gasoline or marine gas oil. It gives easy cold start and efficient engine lubrication at low temperatures, as well as optimum protection at high temperatures, without increasing oil consumption.

 

 

User benefits include:

  • Superior soot dispersancy.
  • Cleaner and more efficient operation.
  • Reduced maintenance.
  • Excellent oil consumption control.
  • Prevention against formation of harmful engine deposits.
  • Excellent protection under conditions of extended drain.
  • Good viscosity control.

 

Approval Status:

Seamax Super Plus 15W-40 meets the requirements of API CH-4 and ACEA E3/E5.

Discover More +
Castrol MHP 153 - Diesel engine lubricants - 5022

Castrol MHP 153 - Diesel engine lubricants - 5022

 

MHP 153 and 154 are high performance lubricants specifically developed for use in modern highly rated marine and power generation four-stroke engines operating on distillate fuels.

Available in: 208L Drums, Bulk

 

Application

MHP is suitable for use in medium to highly-rated marine trunk piston engines operating with ISO 8217 type DMA/DMZ/DMB/RMA10 fuels and require API CF performance. MHP has high load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.

 

 

User benefits include:

  • Enhanced detergency, excellent thermal and oxidative stability.
  • Enhanced performance at high temperatures.
  • High load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.
  • Cleaner piston ring belts.
  • Excellent engine cleanliness.
  • Reduced maintenance and wear.
  • Improved resistance to liner lacquering.
  • Extended time between overhauls.

 

Approval Status:

MHP exceeds the specifications of API CF and is fully approved by major marine engine makers worldwide.

Discover More +
Castrol MHP 154 - Diesel engine lubricants - 5023

Castrol MHP 154 - Diesel engine lubricants - 5023

 

MHP 153 and 154 are high performance lubricants specifically developed for use in modern highly rated marine and power generation four-stroke engines operating on distillate fuels.

Available in: 208L Drums, Bulk

 

Application

MHP is suitable for use in medium to highly-rated marine trunk piston engines operating with ISO 8217 type DMA/DMZ/DMB/RMA10 fuels and require API CF performance. MHP has high load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.

 

 

User benefits include:

  • Enhanced detergency, excellent thermal and oxidative stability.
  • Enhanced performance at high temperatures.
  • High load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.
  • Cleaner piston ring belts.
  • Excellent engine cleanliness.
  • Reduced maintenance and wear.
  • Improved resistance to liner lacquering.
  • Extended time between overhauls.

 

Approval Status:

MHP exceeds the specifications of API CF and is fully approved by major marine engine makers worldwide.

Discover More +
Castrol HLX 40 - Diesel engine lubricants - 5049

Castrol HLX 40 - Diesel engine lubricants - 5049

 

HLX 40 is a Super High Performance Diesel (SHPD) lubricant, specially formulated to meet the latest performance requirements of marine monograde lubricant specifications, allowing extended drain periods to effectively compete with performance normally associated with synthetic oils. HLX uses premium additive technology blended in high quality, high viscosity index base oils. It provides superior detergency and excellent thermal and oxidative stability required to lubricate today's most severe diesel engine applications.

Available in: 208L, 1000L IBC, Bulk

 

Application

HLX, positioned at the top of the Castrol range of mineral based lubricants, is formulated for use in very highly rated high speed marine and power generation diesel engines that use distillate fuel with sulphur from zero up to 1% and require extreme performance. It is particularly suitable for high power density applications such as fast ferries.

 

 

User benefits include:

  • Extended oil drain intervals.
  • Excellent high temperature performance.
  • Superior resistance to bore polishing.
  • Improved lacquer resistance.
  • Synthetic performance in a mineral oil.

 

Approval Status:

HLX 40 is approved by all the major OEM's, including approval as a `Type 2` MTU monograde lubricant, that allows drain intervals to be doubled over standard marine oils.
HLX additive technology exceeds API CF and ACEA E3 - tested to MB 228.2, MAN M3275 and Volvo VDS-2.

Discover More +
Castrol Coral 2 - Stern tube oil - 5082

Castrol Coral 2 - Stern tube oil - 5082

 

Coral 2 stern tube oil is designed to readily emulsify with seawater thus providing certain advantages over oils selected for demulsibility in a wet environment. Firstly, oil/water emulsions provide a higher viscosity fluid than neat oils thus minimising oil loss or water ingress. Secondly, by sustaining an oil/water emulsion, corrosion from separated seawater, which can occur in a statically loaded stern tube bearing, is avoided.

 

Application

This grade has given satisfactory service in stern tubes employing a wide variety of seals including Cedervall, Chuetsu - Waukesha, and Simplex Compact Seals. Coral 2 has other applications in the marine environment, including the use in fin stabilisers and propeller hubs.

 

 

User benefits include:

Blended from selected mineral oils compounded with a natural emulsifer, this lubricant gives a stable high viscosity emulsion and good rust protection.

 

Approval Status:

Approved by most major manufacturers of stern tube systems.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Castrol Hyspin AWS 15 - Antiwear Hydraulic Oils - 6016

Castrol Hyspin AWS 15 - Antiwear Hydraulic Oils - 6016

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 22 - Antiwear Hydraulic Oils - 6017

Castrol Hyspin AWS 22 - Antiwear Hydraulic Oils - 6017

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 32 - Antiwear Hydraulic Oils - 6018

Castrol Hyspin AWS 32 - Antiwear Hydraulic Oils - 6018

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 46 - Antiwear Hydraulic Oils - 6019

Castrol Hyspin AWS 46 - Antiwear Hydraulic Oils - 6019

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin AWS 68 - Antiwear Hydraulic Oils - 6020

Castrol Hyspin AWS 68 - Antiwear Hydraulic Oils - 6020

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +