Kernow Oils - Lubricant Solutions

Filter Your Results...

By Viscosity...
By Brand...

Aviation

Castrol Aero 35 - Landing Gear Shock Strut Fluid - 1965

Castrol Aero 35 - Landing Gear Shock Strut Fluid - 1965

 

Castrol Aero™ 35 is a high quality, MIL-PRF-6083F based ISO Grade 15 mineral hydraulic fluid, containing antiwear agents and corrosion inhibitors. It also contains a shear stable viscosity index improver, anti-oxidant and an approved EP additive system which reduces martensitic streaking of landing gear outer cylinders and galling of shock strut upper bearings. This formulation is specially designed to reduce the "stick-slip" properties of MIL-PRF- 6083F fluids. Aero 35 is available in dyed red (Douglas Aircraft DPM 6177) or straw/yellow (undyed) (Boeing Spec BMS 3-32B, Type I).

 

Application

Aero 35 is specially designed for use in landing gear shock struts. Additionally, Aero 35 is compatible with approved MILPRF- 5606H and MIL-PRF-6083F hydraulic fluids. It is not completely compatible with synthetic gas turbine lubricants nor with phosphate-ester hydraulic fluids. It is compatible with other petroleum-based and synthesized hydrocarbon lubricants, but contamination should be avoided in order to maintain the unique properties of Aero 35. This product is compatible with most seals, hoses, and paints, normally used in shock struts and dispensing equipment connected with this application. While certain grades of the above materials are fully compatible with Aero 35, it is advisable to confirm acceptability of use with either the material manufacturer or Castrol.

 

Aero 35 Red is formulated in accordance with Douglas Aircraft Specification DPS 3.334, referenced as Douglas stocknumber DPM 6177.
Aero 35 Yellow (undyed) is formulated in accordance with Boeing Specification BMS 3-32B, Type I as an alternative to Boeing Service Letters 707-SL-12-2; 727-SL-12-2; 737-SL-12-2; 757-SL-27-15-B. These letters instruct the addition of an EP additive to either the standard or corrosion inhibited mineral based hydraulic fluid for use in their landing gear shock struts.

Discover More +
Castrol Aero HF 585 B - Mineral hydraulic fluid - 1973

Castrol Aero HF 585 B - Mineral hydraulic fluid - 1973

 

Low viscosity, high viscosity index hydraulic oil.
Petrolium based aircraft hydraulic fluid – dyed red.


ISO Viscosity and pack sizes available
AERO HF 585 B – 20L & 208L

 

DESCRIPTION

Castrol Aero HF 585B is a mineral oil based low viscosity hydraulic fluid which is intended for use in hydraulic systems where rapid system response is required, particularly at low temperatures. Castrol Aero HF 585B is ideally suited to accumulator driven emergency control systems. Castrol Aero HF 585B is produced from low viscosity highly refined mineral basestock, shear stable viscosity index improver, antioxidants, corrosion inhibitors and anti-wear additives.

 

APPLICATION

Hydraulic systems operating at low ambient temperatures or driven by accumulators, such as Emergency Shut Down Valves and Watertight Door Controls.

 

CONDITIONS OF USE

The wearing of impervious PVC (or other suitable material) apron and gloves, together with eye protection is recommended. Contaminated clothing should be changed immediately and thoroughly cleansed before re-use. This applies especially to under garments.

 

ADVANTAGES

Castrol Aero HF 585B is available globally and combines excellent protection with performance and versatility in Offshore operations to provide the following key benefits:-

  • Excellent low temperature fluidity.
  • Good viscosity characteristics over a wide temperature range.
  • Good elastomer compatability.
  • Good compatibility with metals.

 

ADDITIONAL INFORMATION

Performance Levels & OEM Approvals:

  • DEF STAN 91-48/2
  • Joint Services Designation OM-15
  • US Military MIL-H-5606E
  • NATO H-515
Discover More +
Castrol Aero 40 - Landing Gear Shock Strut Fluid - 1976

Castrol Aero 40 - Landing Gear Shock Strut Fluid - 1976

 

Castrol Aero 40 is a high quality, mineral based MIL-H-5606 hydraulic fluid containing a highly shear stable viscosity index improver, an anti-oxidant, anti-wear agents, and an approved EP additive which reduce martensitic streaking of landing gear outer cylinders and galling of shock strut upper bearings. Castrol Aero 40 is undyed, straw coloured to meet Boeing Specification BMS 3-32, Type II.

 

Application

Castrol Aero 40 is designed for use in landing gear shock struts. Castrol Aero 40 is compatible with approved MIL-PRF-6083 and other MIL-PRF-5606 qualified hydraulic fluids. It is not completely compatible with synthetic gas turbine lubricants nor with phosphate-ester hydraulic fluids. It is compatible with other petroleum-based and synthesised hydrocarbon lubricants but contamination should be avoided in order to maintain the unique properties of Castrol Aero 40. It is compatible with seals, hoses and paints normally used in shock struts and dispensing equipment connected with this application. While certain grades of the above materials are fully compatible with Castrol Aero 40, it is advisable to confirm acceptability of use with either the material manufacturer or Castrol.

 

Advantages:

  • Approved EP additive
  • Reduces martensitic streaking of landing gear outer cylinders and galling of shock strut upper bearings.

 

APPROVAL STATUS:
Castrol Aero 40 is formulated and fully approved to Boeing BMS 3-32 Type II. Boeing Service Letters 707-SL-12-2; 727-SL-12-2; 737-SL-12-2; and 757-SL-27-15-B, which instruct the addition of an EP additive to either the standard or corrosion inhibited mineral based hydraulic fluid for use in their landing gear shock struts.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Castrol Brayco Micronic 882 - Hydraulic Fluid, Fire Resistant Synthetic Hydrocar

Castrol Brayco Micronic 882 - Hydraulic Fluid, Fire Resistant Synthetic Hydrocarbon Base - 1986

 

Castrol Brayco™ Micronic 882 is a red coloured synthetic hydrocarbon hydraulic fluid ISO viscosity Grade 15 for aircraft, ordnance, and industrial use. It contains no VI improvers and, unlike conventional hydraulic fluids, is not subject to polymer breakdown under high shear conditions. It can be used as a replacement and make-up oil for MIL-PRF-5606, and it is also compatible with MIL-PRF-6083 in all proportions. Brayco Micronic 882 has a high flash and fire point, exceptionally high auto ignition point, and very low flame propagation. Its properties also include controlled rubber swell for long seal life, low foaming, excellent anti-wear, and good corrosion and oxidation stability.

 

Application

Brayco Micronic 882 is primarily designed as a fire resistant hydraulic fluid for aircraft and missile use, but also has many industrial applications where fire and fluid toxicity are a hazard. Brayco Micronic 882 is a direct replacement for MIL-PRF-5606.

 

 

  • High flash and fire point & exceptionally high auto ignition point, and very low propagation.
  • Inherently safer
  • Controlled rubber swell
  • Long seal life
  • Selected additive package
  • Excellent anti-wear and good corrosion and oxidation stability


Brayco Micronic 882 meets all requirements and is qualified under military specification MIL-PRF-83282D, Amendment 1.

Discover More +
Castrol Brayco 589 - Corrosion Preventive Oil - 1990

Castrol Brayco 589 - Corrosion Preventive Oil - 1990

 

Castrol Brayco™ 589 is intended for preservation of turboprop and turbojet engines. This corrosion preventative oil is capable of limited use, not to exceed 25 hours, as an aircraft engine lubricant, and can be used for both preservation and final acceptance runs of aircraft engines requiring MIL-PRF-7808 oils.

 

Application

Since Brayco 589 is a synthetic ester based fluid it may adversely affect certain paints and elastomers. Serious deterioration of rubber parts, coatings, paint, and other organic materials may result from use of this product in systems designed for use with petroleum based fluids. Customers should determine the compatibility of existing components and make any changes as required to accompany use of this fluid.

The recommended operating temperature range for MIL-PRF-7808 type oils are from –54°C to 149°C (-65°F to 300°F).

Specifications Brayco 589 meets all the requirements of, and is qualified to MIL-PRF-8188D. This fluid is identified by NATO Code: C-638.

Discover More +
Castrol Brayco 460 - Jet Engine Lubricating Oil - 1997

Castrol Brayco 460 - Jet Engine Lubricating Oil - 1997

 

Castrol Brayco™ 460 is a petroleum-based, jet engine lubricating oil. The base oil is a highly refined mineral oil meeting the highest standards of quality.

 

Application

Brayco 460 is designed for use in older jet engines and other high-speed turbines that require this type of petroleum based turbine oil. Brayco 460 may also be used in various applications requiring low temperature operation and good viscosity behaviour.

 

Specifications
Brayco 460 meets the requirements of and is qualified to MIL-PRF-6081D, Grade 1010. This fluid is identified by NATO Code Number: O-133. A

Discover More +
Castrol Braycote 622 - Grease, General Purpose - 1998

Castrol Braycote 622 - Grease, General Purpose - 1998

 

Castrol Braycote™ 622 is a synthetic hydrocarbon base, non-soap thickened grease. It offers outstanding high and low temperature properties, water resistance, and extreme pressure characteristics making it suitable for applications that exceed the capabilities of the best conventional greases. Braycote 622 has good oxidation and corrosion resistance, a low bleed and evaporation rate, and minimal effect on rubber seals. Its compatibility with mineral oil base greases is an added advantage.

 

Application

Braycote 622 is particularly suited for aircraft applications such as wheel bearings, helicopter rotor bearings, control systems, applications including conveyor bearings, small alternator bearings operating at temperatures near 350ºF (177ºC), high speed miniature ball bearings, and bearing situations where oscillation, vibration, and fretting create problems.

 

Specification: Castrol Braycote® 622 meets all the requirements of, and is qualified under military specification MIL-PRF81322F, NLGI Grade 2 and DOD-G-24508A, Amendment 4 (NAVY).

Discover More +
BP Turbo Oil 2380 - Aircraft-Type Gas Turbine Lubricant

BP Turbo Oil 2380 - Aircraft-Type Gas Turbine Lubricant

 

Description
BP Turbo Oil 2380 gas turbine lubricant is a combination of a highly stable synthetic base fluid and a unique chemical additive package. The combination provides outstanding thermal and oxidation stability to resist deterioration and deposit formation in both the liquid and vapour phases, as well as excellent resistance to foaming.
The effective operating range of BP Turbo Oil 2380 is between -40°C and 204°C. Pour point is -57°C. The product has a high specific heat in order to ensure good heat transfer from oil-cooled engine parts. The high degree of oxidation resistance of BP Turbo Oil 2380 permits long periods of operation without significant increase in viscosity or total acidity.

 

Applications
BP Turbo Oil 2380 is recommended for aircraft gas turbine engines of the turbo-jet, turbo-fan, turbo-prop, and turbo-shaft (helicopter) types in commercial and military service. It also is recommended for aircraft-type gas turbine engines in industrial or marine application.
BP Turbo Oil 2380 is approved against U.S. Military Specification MIL-PRF-23699F-STD.
It is also approved by a wide range of engine and accessory manufacturers including:

  • Allison Engine Co.
  • General Electric Company
  • Pratt & Whitney Group, United Technologies Corp.
  • SNECMA
  • Pratt & Whitney, Canada
  • Rolls-Royce Limited

+ others.

 

Main Benefits

  • Excellent thermal and oxidation stability minimizes formation of varnish and sludge deposits
  • Exceptional fluidity at -40°C enables use in critical applications where other Type II lubricants are excessively viscous.
  • Excellent load carrying performance increasing the life of bearings, gears and other highly loaded lubricated surfaces.
Discover More +
BP Turbo Oil 2197

BP Turbo Oil 2197

 

Description
BP Turbo Oil 2197 is a latest generation 5 cSt High Thermal Stability (HTS) synthetic lubricant that is approved against US military specification MIL-PRF-23699F HTS.
It is formulated to provide exceptional high temperature cleanliness in vapor mist and liquid film areas, as well as outstanding oxidative, thermal and hydrolytic stability. It provides exceptional performance in the most demanding existing turbines as well as new generation turbines just entering service.

 

Applications & Approvals
BP Turbo Oil 2197 is our newest turbo oil, designed to be a “fleet-wide” oil especially suitable for hot aircraft and aero-derived engines.
BP Turbo Oil 2197 has been approved by a wide range of engine and accessory manufacturers for their applicable equipment, including:

  • Rolls-Royce Ltd
  • Rolls-Royce Allison
  • GE, Pratt & Whitney
  • Pratt & Whitney Canada
  • Hamilton Sundstrand
  • Honeywell
  • CFMI
  • IAE
  • MTU
  • Solar and Turbomeca

 

Features & Benefits

  • BP Turbo Oil 2197 entered commercial airline service in mid-1995 and has already accumulated over 200 million hours of successful experience in more than 20,000 units of popular engine and accessory models.
  • The benefits operators can expect from this oil include excellent Thermal and Oxidation Stability, outstanding high temperature cleanliness and Superior Hydrolytic Stability.
  • Users of this oil have been enjoying cleaner engines, i.e., less or no carbon deposits in oil supply and scavenge tubes or bearing compartments and some of them also experience less frequent oil filter replacement.
Discover More +
Castrol PX 1 - MOD Specification Rust Preventative - 5626

Castrol PX 1 - MOD Specification Rust Preventative - 5626

 

PX 1 is listed by Ministry of Defence as a corrosion preventative compound: soft film, cold application. It is a mobile liquid which, on evaporation of the solvent, deposits a thin soft greasy protective film.

Available in: 20L, 203L drum

 

Application

Short term preservation at medium ambient ground temperatures. Protection of certain engine cylinders, valve gear, complete engines and gun barrels. Preservation of ferrous and light alloy sheets in storage. Can be applied by cold immersion, spraying or brushing.

If required it may be removed with petroleum solvent, alkaline cleaner or vapour degreaser.

 

Protection

  • Indoors - 9 months
  • Outdoors - 3 months

The period specified for outdoor use assumes primary protection from the elements by tarpaulin or other form of cover.

Discover More +
Castrol Brayco Micronic 881 - Low Temperature Hydraulic Fluid - 6077

Castrol Brayco Micronic 881 - Low Temperature Hydraulic Fluid - 6077

 

Castrol Brayco® Micronic 881 is a fire resistant, synthetic hydrocarbon base, low temperature ISO viscosity Grade 7, red-colored hydraulic fluid for aircraft, missile, ordnance, and industrial use. It is specifically designed for low temperature applications where low temperature stability is particularly important. This product also provides controlled rubber swell for long seal life, low foaming properties, excellent anti-wear, corrosion protection, and oxidation stability.

 

Application

Castrol Brayco Micronic 881 is designed as a low temperature fire resistant hydraulic fluid for aircraft and missile use, but has use in many industrial applications as well.

 

Additional Information:

Temperature Range: -54ºC TO 135ºC (-65ºF TO 275ºF)
Specification: Castrol Brayco® Micronic 881 is qualified to MIL-PRF-87257B.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Castrol Brayco Micronic 776 RP - High Response Hydraulic System Fluid - 6078

Castrol Brayco Micronic 776 RP - High Response Hydraulic System Fluid - 6078

 

Brayco™ Micronic 776 RP is a petroleum base, medium viscosity, light colored ISO Grade 22 hydraulic oil used in high performance hydraulic systems. It is a blend of selected, highly refined, high flash point base stocks with suitable additives to yield a product with unusually good anti-wear properties, low rubber swell, and excellent oxidation stability. It provides corrosion protection, dispersancy and is completely shear stable. Brayco Micronic 776 RP is specially processed to meet a guaranteed, low particulate contaminant level.

 

Application

Brayco Micronic 776 RP was developed for use in hydraulic systems that must respond with extreme accuracy. It was developed to replace aircraft hydraulic fluid in micro-hydraulic systems, computer programmed animation for robots, and other systems in which fire resistance, trouble-free operation, leak resistance, and fast precise responses are major requirements. In addition to its intended use, it is currently being used in computer and tape controlled hydraulic systems such as high precision automatic machine tools, data recovery systems, and in rail car control systems and brakes.

 

Additional Information:

Specification - Brayco Micronic 776 RP meets stringent specifications that have been accepted as contractual requirements with various OEM users.
Shelf Life - Brayco Micronic 776RP has a maximum recommended shelf life of 6 years from date of manufacture. This shelf life assumes that the product is stored in its original unopened packaging in ambient temperature conditions.

 

Pack sizes available - 55 US Gallons

Discover More +
Castrol Brayco Micronic 783 - Speciality Hydraulic Fluid - 6081

Castrol Brayco Micronic 783 - Speciality Hydraulic Fluid - 6081

 

Castrol Brayco™ Micronic 783 is a petroleum-based, low viscosity, ISO grade 15 red-coloured hydraulic and preservative fluid for aircraft and ordnance use. It is a blend of selected petroleum oils with additives which provide exceptionally good viscosity-temperature characteristics, good anti-wear properties, controlled rubber swell, good shear stability and excellent oxidation resistance. Brayco Micronic 783 is an excellent corrosion preventative and provides a high degree of detergency to maintain clean systems.

Brayco Micronic 783 meets the requirements of and is qualified to the MIL-PRF-6083F military specification. It also meets the requirements for a P-15 preservative under the packaging specification MIL-P-116. This fluid is identified by the Military Symbol OHT and NATO Code Number C-635.

 

Application

Brayco Micronic 783 is designed for aircraft, ordnance and other general hydraulic use and for preserving hydraulic components over a temperature range of -54ºC to 135ºC (-65ºF to 275ºF). It may be used as an operational preservative fluid for all tactical and support ordnance intended for use in MIL-PRF-5606 service. Brayco Micronic 783 can be used in the hydraulic systems of missile ground support equipment and is particularly suitable for use in systems with long periods of inactivity during service.

 

Conditions of Use

  • Brayco Micronic 783 is generally used in contact with "L" type standard synthetic rubber material.
  • May be used with conventional oil and grease resistant paints.
  • As with all other fluids meeting MIL-PRF-6083 requirements, this product should only be mixed with other fluids meeting MIL-PRF-5606, MIL-PRF-46170 and MIL-PRF-83282 specifications.

 

Pack sizes available - 55 US Gallons

Discover More +
Castrol Brayco Micronic 756 - Hydraulic Fluid, Petroleum Base Aircraft, Missile,

Castrol Brayco Micronic 756 - Hydraulic Fluid, Petroleum Base Aircraft, Missile, and Ordnance - 6087

 

Castrol Brayco™ Micronic 756 is a petroleum base, low viscosity, red colored ISO Grade 15 hydraulic fluid for aircraft, missile and ordnance use. It is a blend of highly refined, selected base stocks with suitable additives, which yield a product with exceptionally good viscosity-temperature characteristics, good anti-wear properties, low rubber swell, and excellent oxidation stability. The use of a polymeric viscosity index improver of low molecular weight provides stability in comparison to typical hydraulic fluids.

 

Application

Brayco Micronic 756 is designed for use in aircraft, missile, and ordnance hydraulic systems where long term stability and a low temperature fluid is required. Brayco Micronic 756 is filtered to meet rigid particle contaminant requirements. It is intended for use in automatic pilots, shock absorbers, brakes, flap-control mechanisms, missile hydraulic servo-controlled systems and other hydraulic systems using synthetic sealing materials. Fluids compounded to meet this specification undergo certain changes with use. Further information relative to usable life may be found in Fainman and Mackenzie, "The Characteristics and Performance of Specification MIL-H-5606 Hydraulic Fluid," Lubrication Engineering 22234 (1966).

 

Additional Information:

Temperature Range - Brayco Micronic 756 is designed to operate over the temperature range of -54ºC to 135ºC (-65ºF to 275ºF).
Specification - Brayco Micronic 756 meets the requirements and is qualified under military specification MIL-PRF-5606H. This fluid is identified by Military Symbol: OHA and NATO Code Number: H-515.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Castrol Brayco 795 - Low Viscosity Speciality Hydraulic Fluid - 6310

Castrol Brayco 795 - Low Viscosity Speciality Hydraulic Fluid - 6310

 

Castrol Brayco™ 795 is a petroleum-based, low viscosity hydraulic fluid for aircraft and industrial use. It uses a blend of highly refined basestocks.

 

Application

Brayco 795 is designed for use in aircraft clutch and brake devices where a low temperature fluid is required. It is formulated with special additives which assist in providing quiet operation of aircraft clutch and brake devices including the "no back brake device". It is suitable for use over an operating temperature range of -54ºC to 135ºC (-65ºF to 275ºF).

 

Pack sizes available - 55 US Gallons

Discover More +
Castrol Brayco 885 - Low Volatility, Aircraft Instrument Lubricating Oil - 6312

Castrol Brayco 885 - Low Volatility, Aircraft Instrument Lubricating Oil - 6312

 

Castrol Brayco™ 885 is a diester base synthetic oil with additives which impart corrosion protection, minimise galvanic corrosion, inhibit oxidation, and reduce foaming tendencies. It has exceptionally low volatility and good viscosity temperature characteristics. Temperature Range Brayco 885 is designed to operate over the temperature range of -65ºF to 250ºF (-54ºC to 121ºC).

 

Application

Brayco 885 is intended for use in aircraft instruments, electronic equipment, or in applications where an oil with a low evaporation rate is required for both high and low temperature operation, and also where oxidation and corrosion resistance is desirable. Brayco 885 may adversely affect certain paints and elastomers. Products other than those developed for diester base fluids should be carefully tested for compatibility prior to use. Brayco 885 is qualified under Specification MIL-PRF-6085D. It is specified as a P-17 preservative under packaging Specification MIL-STD-2073-1.

 

Pack sizes available - 55 US Gallons

Discover More +
Castrol Brayco 300 - Lubricating Oil - 6313

Castrol Brayco 300 - Lubricating Oil - 6313

 

Castrol Brayco™ 300 is a blend of highly refined petroleum oil with suitable additives which provide corrosion prevention, oxidation resistance, and freedom from galvanic corrosion in brass-steel bimetallic systems. The viscosity is similar to a light machine oil. Brayco 300 is a water displacing oil for general purpose applications at low and medium temperatures (-70ºF to 300ºF).

 

Application

Brayco 300 is designed for the lubrication and preservation of small arms, automatic weapons, and fuse mechanism applications, especially where a low temperature, water displacing oil is desired. It may be used to protect unpainted metal surfaces from the effects of indoor storage for periods of three to six months, after which it remains readily removable. Brayco 300 will also protect magnesium and aluminum against corrosion at low and medium temperatures (-70°F to 300°F). Brayco 300 may be applied by brush, dip, swab, spray, or squirt can. Depending on the method of application and surface geometries, Brayco 300 will cover 1,000 to 3,000 square feet per gallon. For water displacement, it may be applied by these same methods. Displaced water should be removed from dip tanks at suitable intervals.

 

Additional Information:

Specifications - Brayco 300 meets the requirements of and is qualified to MIL-PRF-32033. This product is identified by NATO Code Number O-190.
Shelf Life - Brayco 300 has a maximum recommended shelf life of 6 years from date of manufacture. This shelf life assumes that the product is stored in it’s original unopened packaging in ambient temperature conditions.

 

Pack sizes available - 55 US Gallons

Discover More +
Castrol Brayco 922 - Calibrating Fluid Aircraft Fuel System Components - 8862

Castrol Brayco 922 - Calibrating Fluid Aircraft Fuel System Components - 8862

 

Castrol BraycoTM 922 is a special run, stoddard solvent calibrating fluid.

 

Application

Brayco 922 is designed for use in the calibration of fuel system components for aircraft reciprocating engines and aircraft gas turbines. It is compatible with Nitrile, PVA and Viton, but not recommended for use with butyl rubber, natural rubber, neoprene or EPDM.

Brayco 922 is designed to operate over the temperature range of 10ºC to 30ºC (50ºF to 86ºF)

Brayco 922 meets the requirements of MIL-PRF-7024E, Type II.

 

Pack sizes available - 55 US Gallons

Discover More +
Castrol Aeroplex 444 - Extended Life Grease for Aircraft Airframe Equipment - 92

Castrol Aeroplex 444 - Extended Life Grease for Aircraft Airframe Equipment - 9210

 

Castrol Aeroplex™ 444 is a hybrid synthetic, lithium complex NLGI Grade 2 grease. It contains proprietary Castrol additives and offers excellent low temperature properties. Aeroplex 444 has enhanced anti-wear, oil separation, corrosion resistance and low temperature torque characteristics.

 

Application

Aeroplex 444 is an extended-life grease designed for use in aircraft airframe equipment. It was specifically developed for the Boeing Company and is approved to Boeing Specification BMS 3-34. Typical uses include roller bearings, actuator screws and other airframe equipment. This product should be used in accordance with the guidelines and maintenance practices specified by Boeing in applications requiring a BMS 3-34 grease or according to the requirements of other aircraft manufacturers.

 

Pack sizes available - 35 US Lb

Discover More +