Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Viscosity...

Aviation

Castrol Aero 35 - Landing Gear Shock Strut Fluid - 1965

Castrol Aero 35 - Landing Gear Shock Strut Fluid - 1965

 

Castrol Aero™ 35 is a high quality, MIL-PRF-6083F based ISO Grade 15 mineral hydraulic fluid, containing antiwear agents and corrosion inhibitors. It also contains a shear stable viscosity index improver, anti-oxidant and an approved EP additive system which reduces martensitic streaking of landing gear outer cylinders and galling of shock strut upper bearings. This formulation is specially designed to reduce the "stick-slip" properties of MIL-PRF- 6083F fluids. Aero 35 is available in dyed red (Douglas Aircraft DPM 6177) or straw/yellow (undyed) (Boeing Spec BMS 3-32B, Type I).

 

Application

Aero 35 is specially designed for use in landing gear shock struts. Additionally, Aero 35 is compatible with approved MILPRF- 5606H and MIL-PRF-6083F hydraulic fluids. It is not completely compatible with synthetic gas turbine lubricants nor with phosphate-ester hydraulic fluids. It is compatible with other petroleum-based and synthesized hydrocarbon lubricants, but contamination should be avoided in order to maintain the unique properties of Aero 35. This product is compatible with most seals, hoses, and paints, normally used in shock struts and dispensing equipment connected with this application. While certain grades of the above materials are fully compatible with Aero 35, it is advisable to confirm acceptability of use with either the material manufacturer or Castrol.

 

Aero 35 Red is formulated in accordance with Douglas Aircraft Specification DPS 3.334, referenced as Douglas stocknumber DPM 6177.
Aero 35 Yellow (undyed) is formulated in accordance with Boeing Specification BMS 3-32B, Type I as an alternative to Boeing Service Letters 707-SL-12-2; 727-SL-12-2; 737-SL-12-2; 757-SL-27-15-B. These letters instruct the addition of an EP additive to either the standard or corrosion inhibited mineral based hydraulic fluid for use in their landing gear shock struts.

Discover More +
Castrol Aero HF 585 B - Mineral hydraulic fluid - 1973

Castrol Aero HF 585 B - Mineral hydraulic fluid - 1973

 

Low viscosity, high viscosity index hydraulic oil.
Petrolium based aircraft hydraulic fluid – dyed red.


ISO Viscosity and pack sizes available
AERO HF 585 B – 20L & 208L

 

DESCRIPTION

Castrol Aero HF 585B is a mineral oil based low viscosity hydraulic fluid which is intended for use in hydraulic systems where rapid system response is required, particularly at low temperatures. Castrol Aero HF 585B is ideally suited to accumulator driven emergency control systems. Castrol Aero HF 585B is produced from low viscosity highly refined mineral basestock, shear stable viscosity index improver, antioxidants, corrosion inhibitors and anti-wear additives.

 

APPLICATION

Hydraulic systems operating at low ambient temperatures or driven by accumulators, such as Emergency Shut Down Valves and Watertight Door Controls.

 

CONDITIONS OF USE

The wearing of impervious PVC (or other suitable material) apron and gloves, together with eye protection is recommended. Contaminated clothing should be changed immediately and thoroughly cleansed before re-use. This applies especially to under garments.

 

ADVANTAGES

Castrol Aero HF 585B is available globally and combines excellent protection with performance and versatility in Offshore operations to provide the following key benefits:-

  • Excellent low temperature fluidity.
  • Good viscosity characteristics over a wide temperature range.
  • Good elastomer compatability.
  • Good compatibility with metals.

 

ADDITIONAL INFORMATION

Performance Levels & OEM Approvals:

  • DEF STAN 91-48/2
  • Joint Services Designation OM-15
  • US Military MIL-H-5606E
  • NATO H-515
Discover More +
Castrol Aero 40 - Landing Gear Shock Strut Fluid - 1976

Castrol Aero 40 - Landing Gear Shock Strut Fluid - 1976

 

Castrol Aero 40 is a high quality, mineral based MIL-H-5606 hydraulic fluid containing a highly shear stable viscosity index improver, an anti-oxidant, anti-wear agents, and an approved EP additive which reduce martensitic streaking of landing gear outer cylinders and galling of shock strut upper bearings. Castrol Aero 40 is undyed, straw coloured to meet Boeing Specification BMS 3-32, Type II.

 

Application

Castrol Aero 40 is designed for use in landing gear shock struts. Castrol Aero 40 is compatible with approved MIL-PRF-6083 and other MIL-PRF-5606 qualified hydraulic fluids. It is not completely compatible with synthetic gas turbine lubricants nor with phosphate-ester hydraulic fluids. It is compatible with other petroleum-based and synthesised hydrocarbon lubricants but contamination should be avoided in order to maintain the unique properties of Castrol Aero 40. It is compatible with seals, hoses and paints normally used in shock struts and dispensing equipment connected with this application. While certain grades of the above materials are fully compatible with Castrol Aero 40, it is advisable to confirm acceptability of use with either the material manufacturer or Castrol.

 

Advantages:

  • Approved EP additive
  • Reduces martensitic streaking of landing gear outer cylinders and galling of shock strut upper bearings.

 

APPROVAL STATUS:
Castrol Aero 40 is formulated and fully approved to Boeing BMS 3-32 Type II. Boeing Service Letters 707-SL-12-2; 727-SL-12-2; 737-SL-12-2; and 757-SL-27-15-B, which instruct the addition of an EP additive to either the standard or corrosion inhibited mineral based hydraulic fluid for use in their landing gear shock struts.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Castrol Brayco Micronic 882 - Hydraulic Fluid, Fire Resistant Synthetic Hydrocar

Castrol Brayco Micronic 882 - Hydraulic Fluid, Fire Resistant Synthetic Hydrocarbon Base - 1986

 

Castrol Brayco™ Micronic 882 is a red coloured synthetic hydrocarbon hydraulic fluid ISO viscosity Grade 15 for aircraft, ordnance, and industrial use. It contains no VI improvers and, unlike conventional hydraulic fluids, is not subject to polymer breakdown under high shear conditions. It can be used as a replacement and make-up oil for MIL-PRF-5606, and it is also compatible with MIL-PRF-6083 in all proportions. Brayco Micronic 882 has a high flash and fire point, exceptionally high auto ignition point, and very low flame propagation. Its properties also include controlled rubber swell for long seal life, low foaming, excellent anti-wear, and good corrosion and oxidation stability.

 

Application

Brayco Micronic 882 is primarily designed as a fire resistant hydraulic fluid for aircraft and missile use, but also has many industrial applications where fire and fluid toxicity are a hazard. Brayco Micronic 882 is a direct replacement for MIL-PRF-5606.

 

 

  • High flash and fire point & exceptionally high auto ignition point, and very low propagation.
  • Inherently safer
  • Controlled rubber swell
  • Long seal life
  • Selected additive package
  • Excellent anti-wear and good corrosion and oxidation stability


Brayco Micronic 882 meets all requirements and is qualified under military specification MIL-PRF-83282D, Amendment 1.

Discover More +
Castrol Brayco 589 - Corrosion Preventive Oil - 1990

Castrol Brayco 589 - Corrosion Preventive Oil - 1990

 

Castrol Brayco™ 589 is intended for preservation of turboprop and turbojet engines. This corrosion preventative oil is capable of limited use, not to exceed 25 hours, as an aircraft engine lubricant, and can be used for both preservation and final acceptance runs of aircraft engines requiring MIL-PRF-7808 oils.

 

Application

Since Brayco 589 is a synthetic ester based fluid it may adversely affect certain paints and elastomers. Serious deterioration of rubber parts, coatings, paint, and other organic materials may result from use of this product in systems designed for use with petroleum based fluids. Customers should determine the compatibility of existing components and make any changes as required to accompany use of this fluid.

The recommended operating temperature range for MIL-PRF-7808 type oils are from –54°C to 149°C (-65°F to 300°F).

Specifications Brayco 589 meets all the requirements of, and is qualified to MIL-PRF-8188D. This fluid is identified by NATO Code: C-638.

Discover More +
Castrol Brayco 460 - Jet Engine Lubricating Oil - 1997

Castrol Brayco 460 - Jet Engine Lubricating Oil - 1997

 

Castrol Brayco™ 460 is a petroleum-based, jet engine lubricating oil. The base oil is a highly refined mineral oil meeting the highest standards of quality.

 

Application

Brayco 460 is designed for use in older jet engines and other high-speed turbines that require this type of petroleum based turbine oil. Brayco 460 may also be used in various applications requiring low temperature operation and good viscosity behaviour.

 

Specifications
Brayco 460 meets the requirements of and is qualified to MIL-PRF-6081D, Grade 1010. This fluid is identified by NATO Code Number: O-133. A

Discover More +
Castrol Braycote 622 - Grease, General Purpose - 1998

Castrol Braycote 622 - Grease, General Purpose - 1998

 

Castrol Braycote™ 622 is a synthetic hydrocarbon base, non-soap thickened grease. It offers outstanding high and low temperature properties, water resistance, and extreme pressure characteristics making it suitable for applications that exceed the capabilities of the best conventional greases. Braycote 622 has good oxidation and corrosion resistance, a low bleed and evaporation rate, and minimal effect on rubber seals. Its compatibility with mineral oil base greases is an added advantage.

 

Application

Braycote 622 is particularly suited for aircraft applications such as wheel bearings, helicopter rotor bearings, control systems, applications including conveyor bearings, small alternator bearings operating at temperatures near 350ºF (177ºC), high speed miniature ball bearings, and bearing situations where oscillation, vibration, and fretting create problems.

 

Specification: Castrol Braycote® 622 meets all the requirements of, and is qualified under military specification MIL-PRF81322F, NLGI Grade 2 and DOD-G-24508A, Amendment 4 (NAVY).

Discover More +
Castrol PX 1 - MOD Specification Rust Preventative - 5626

Castrol PX 1 - MOD Specification Rust Preventative - 5626

 

PX 1 is listed by Ministry of Defence as a corrosion preventative compound: soft film, cold application. It is a mobile liquid which, on evaporation of the solvent, deposits a thin soft greasy protective film.

Available in: 20L, 203L drum

 

Application

Short term preservation at medium ambient ground temperatures. Protection of certain engine cylinders, valve gear, complete engines and gun barrels. Preservation of ferrous and light alloy sheets in storage. Can be applied by cold immersion, spraying or brushing.

If required it may be removed with petroleum solvent, alkaline cleaner or vapour degreaser.

 

Protection

  • Indoors - 9 months
  • Outdoors - 3 months

The period specified for outdoor use assumes primary protection from the elements by tarpaulin or other form of cover.

Discover More +
Castrol Brayco Micronic 881 - Low Temperature Hydraulic Fluid - 6077

Castrol Brayco Micronic 881 - Low Temperature Hydraulic Fluid - 6077

 

Castrol Brayco® Micronic 881 is a fire resistant, synthetic hydrocarbon base, low temperature ISO viscosity Grade 7, red-colored hydraulic fluid for aircraft, missile, ordnance, and industrial use. It is specifically designed for low temperature applications where low temperature stability is particularly important. This product also provides controlled rubber swell for long seal life, low foaming properties, excellent anti-wear, corrosion protection, and oxidation stability.

 

Application

Castrol Brayco Micronic 881 is designed as a low temperature fire resistant hydraulic fluid for aircraft and missile use, but has use in many industrial applications as well.

 

Additional Information:

Temperature Range: -54ºC TO 135ºC (-65ºF TO 275ºF)
Specification: Castrol Brayco® Micronic 881 is qualified to MIL-PRF-87257B.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Castrol Brayco Micronic 776 RP - High Response Hydraulic System Fluid - 6078

Castrol Brayco Micronic 776 RP - High Response Hydraulic System Fluid - 6078

 

Brayco™ Micronic 776 RP is a petroleum base, medium viscosity, light colored ISO Grade 22 hydraulic oil used in high performance hydraulic systems. It is a blend of selected, highly refined, high flash point base stocks with suitable additives to yield a product with unusually good anti-wear properties, low rubber swell, and excellent oxidation stability. It provides corrosion protection, dispersancy and is completely shear stable. Brayco Micronic 776 RP is specially processed to meet a guaranteed, low particulate contaminant level.

 

Application

Brayco Micronic 776 RP was developed for use in hydraulic systems that must respond with extreme accuracy. It was developed to replace aircraft hydraulic fluid in micro-hydraulic systems, computer programmed animation for robots, and other systems in which fire resistance, trouble-free operation, leak resistance, and fast precise responses are major requirements. In addition to its intended use, it is currently being used in computer and tape controlled hydraulic systems such as high precision automatic machine tools, data recovery systems, and in rail car control systems and brakes.

 

Additional Information:

Specification - Brayco Micronic 776 RP meets stringent specifications that have been accepted as contractual requirements with various OEM users.
Shelf Life - Brayco Micronic 776RP has a maximum recommended shelf life of 6 years from date of manufacture. This shelf life assumes that the product is stored in its original unopened packaging in ambient temperature conditions.

 

Pack sizes available - 55 US Gallons

Discover More +