Kernow Oils - Lubricant Solutions

BP

BP Energol CS 220 - Circulatory-System Oil

BP Energol CS 220 - Circulatory-System Oil

 

 

Description
A range of high quality additive free oils possessing inherently good resistance to oxidation, good demulsification properties and high viscosity index.

 

Applications
Energol CS oils have a variety of applications such as in circulatory systems for rolling mills and calendars
(both rolling and plain bearings), vacuum pumps and hydraulic systems, where a fluid type ISO HH is required.

 

Main Benefits

  • Long service life
  • Wide range of applications
Discover More +
BP Energol CS 320 - Circulatory-System Oil

BP Energol CS 320 - Circulatory-System Oil

 

Description
A range of high quality additive free oils possessing inherently good resistance to oxidation, good demulsification properties and high viscosity index.

 

Applications
Energol CS oils have a variety of applications such as in circulatory systems for rolling mills and calendars
(both rolling and plain bearings), vacuum pumps and hydraulic systems, where a fluid type ISO HH is required.

 

Main Benefits

  • Long service life
  • Wide range of applications
Discover More +
BP Energol GR-XP 220 - Premium Industrial Gear Oil

BP Energol GR-XP 220 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
BP Energol GR-XP 320 - Premium Industrial Gear Oil

BP Energol GR-XP 320 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
BP Energol GR-XP 68 - Premium Industrial Gear Oil

BP Energol GR-XP 68 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
BP Energol HLP-HM 22 - High Performance Hydraulic Oil

BP Energol HLP-HM 22 - High Performance Hydraulic Oil

 

Description
A range of mineral oil-based hydraulic fluids conforming to the international classification ISO Type HM and offering a wide choice of viscosities.
The properties of their solvent-refined base oils are enhanced by full additive treatment to minimize corrosion, oxidation, foaming and machinery wear.

 

Applications
Energol HLP -HM oils are formulated for highly stressed hydraulic systems where high levels of anti-wear performance are needed and meet filtration requirements of almost every hydraulic system (down to 6 micron filters). They are also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as in lightly loaded gears, in some variable speed units and in bearings.

The HLP -HM range is fully compatible with the elastomers materials commonly used for static and dynamic seals, such as:
. Nitryl butyl (PERBUNAN* or BUNA N*)
. Fluorinated (VITON*/TEFLON*)
. Perfluorinated (KABREZ*) . Polyester (HYTREL*)
. Polyurethane (ADIPRENE*) * trade marks
The Energol HLP-HM oils meet the performance requirements of  DIN 51 524 Part 2 'Hydraulic Oils Type H-LP'and of ISO 6743/4 'Hydraulic Oils Type HM' (NF E 48-603 and NF E 60-203).


They meet the specifications/requirements of many major manufacturers, namely:
. Denison HF-0, HF-2
. Vickers industrial machinery, meets form I-286 –S (pump 35V.Q.25)
. Rexnord-Racine vane pumps
. Mannesman Rexroth Hydromatik piston pumps
. Sigma-Rexroth gear pumps
. Cincinnati Milacron (p. 68-69-70)
. US Steel 136

 

Main Benefits

  • High degree of equipment protection
  • Excellent performance in anti-wear protection, oxidation resistance and thermal stability
  • Excellent de-aeration characteristics
  • Compatibility with other mineral oils
  • Good filterability
Discover More +
BP Energol HLP-HM 32 - High Performance Hydraulic Oil

BP Energol HLP-HM 32 - High Performance Hydraulic Oil

 

Description
A range of mineral oil-based hydraulic fluids conforming to the international classification ISO Type HM and offering a wide choice of viscosities.
The properties of their solvent-refined base oils are enhanced by full additive treatment to minimize corrosion, oxidation, foaming and machinery wear.

 

Applications
Energol HLP -HM oils are formulated for highly stressed hydraulic systems where high levels of anti-wear performance are needed and meet filtration requirements of almost every hydraulic system (down to 6 micron filters). They are also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as in lightly loaded gears, in some variable speed units and in bearings.

The HLP -HM range is fully compatible with the elastomers materials commonly used for static and dynamic seals, such as:
. Nitryl butyl (PERBUNAN* or BUNA N*)
. Fluorinated (VITON*/TEFLON*)
. Perfluorinated (KABREZ*) . Polyester (HYTREL*)
. Polyurethane (ADIPRENE*) * trade marks
The Energol HLP-HM oils meet the performance requirements of  DIN 51 524 Part 2 'Hydraulic Oils Type H-LP'and of ISO 6743/4 'Hydraulic Oils Type HM' (NF E 48-603 and NF E 60-203).


They meet the specifications/requirements of many major manufacturers, namely :
. Denison HF-0, HF-2
. Vickers industrial machinery, meets form I-286 –S (pump 35V.Q.25)
. Rexnord-Racine vane pumps
. Mannesman Rexroth Hydromatik piston pumps
. Sigma-Rexroth gear pumps
. Cincinnati Milacron (p. 68-69-70)
. US Steel 136

 

Main Benefits

  • High degree of equipment protection
  • Excellent performance in anti-wear protection, oxidation resistance and thermal stability
  • Excellent de-aeration characteristics
  • Compatibility with other mineral oils
  • Good filterability
Discover More +
BP Energol HLP-HM 68 - High Performance Hydraulic Oil

BP Energol HLP-HM 68 - High Performance Hydraulic Oil

 

Description
A range of mineral oil-based hydraulic fluids conforming to the international classification ISO Type HM and offering a wide choice of viscosities.
The properties of their solvent-refined base oils are enhanced by full additive treatment to minimize corrosion, oxidation, foaming and machinery wear.

 

Applications
Energol HLP -HM oils are formulated for highly stressed hydraulic systems where high levels of anti-wear performance are needed and meet filtration requirements of almost every hydraulic system (down to 6 micron filters). They are also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as in lightly loaded gears, in some variable speed units and in bearings.

The HLP -HM range is fully compatible with the elastomers materials commonly used for static and dynamic seals, such as:
. Nitryl butyl (PERBUNAN* or BUNA N*)
. Fluorinated (VITON*/TEFLON*)
. Perfluorinated (KABREZ*) . Polyester (HYTREL*)
. Polyurethane (ADIPRENE*) * trade marks
The Energol HLP-HM oils meet the performance requirements of  DIN 51 524 Part 2 'Hydraulic Oils Type H-LP'and of ISO 6743/4 'Hydraulic Oils Type HM' (NF E 48-603 and NF E 60-203).


They meet the specifications/requirements of many major manufacturers, namely :
. Denison HF-0, HF-2
. Vickers industrial machinery, meets form I-286 –S (pump 35V.Q.25)
. Rexnord-Racine vane pumps
. Mannesman Rexroth Hydromatik piston pumps
. Sigma-Rexroth gear pumps
. Cincinnati Milacron (p. 68-69-70)
. US Steel 136

 

Main Benefits

  • High degree of equipment protection
  • Excellent performance in anti-wear protection, oxidation resistance and thermal stability
  • Excellent de-aeration characteristics
  • Compatibility with other mineral oils
  • Good filterability
Discover More +
BP Energol HLP-HM 46 - High Performance Hydraulic Oil

BP Energol HLP-HM 46 - High Performance Hydraulic Oil

 

Description
A range of mineral oil-based hydraulic fluids conforming to the international classification ISO Type HM and offering a wide choice of viscosities.
The properties of their solvent-refined base oils are enhanced by full additive treatment to minimize corrosion, oxidation, foaming and machinery wear.

 

Applications
Energol HLP -HM oils are formulated for highly stressed hydraulic systems where high levels of anti-wear performance are needed and meet filtration requirements of almost every hydraulic system (down to 6 micron filters). They are also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as in lightly loaded gears, in some variable speed units and in bearings.

The HLP -HM range is fully compatible with the elastomers materials commonly used for static and dynamic seals, such as:
. Nitryl butyl (PERBUNAN* or BUNA N*)
. Fluorinated (VITON*/TEFLON*)
. Perfluorinated (KABREZ*) . Polyester (HYTREL*)
. Polyurethane (ADIPRENE*) * trade marks
The Energol HLP-HM oils meet the performance requirements of  DIN 51 524 Part 2 'Hydraulic Oils Type H-LP'and of ISO 6743/4 'Hydraulic Oils Type HM' (NF E 48-603 and NF E 60-203).


They meet the specifications/requirements of many major manufacturers, namely :
. Denison HF-0, HF-2
. Vickers industrial machinery, meets form I-286 –S (pump 35V.Q.25)
. Rexnord-Racine vane pumps
. Mannesman Rexroth Hydromatik piston pumps
. Sigma-Rexroth gear pumps
. Cincinnati Milacron (p. 68-69-70)
. US Steel 136

 

Main Benefits

  • High degree of equipment protection
  • Excellent performance in anti-wear protection, oxidation resistance and thermal stability
  • Excellent de-aeration characteristics
  • Compatibility with other mineral oils
  • Good filterability
Discover More +
BP Energol JS-A - Transformer Oil

BP Energol JS-A - Transformer Oil

 

Description
A pure hydrocarbon oil specially refined and blended from selected crude oils to comfortably surpass the limiting values of the international specifications IEC 296 - Class 1, and the British National specification BS 148: 1984.

 

Applications
For use as a transformer, switchgear and circuit breaker oil which conforms to the international specification IEC 296 - Class 1, which is the equivalent to BS 148: 1984

 

Main Benefits

  • High dielectric strength and low power-loss
  • High oxidation resistance
  • Low sludge formation
  • Excellent cooling properties
  • High purity and high flashpoint
Discover More +