Kernow Oils - Lubricant Solutions

Transmission & Gear Oils

Castrol Transmax Dex III Multivehicle - Automatic Transmission Fluid - 1713

Castrol Transmax Dex III Multivehicle - Automatic Transmission Fluid - 1713

 

Automatic Transmission Fluid

 

Description

Castrol Transmax Dex III Multivehicle is designed for use in GM automatic transmissions pre 2005 and Ford automatic transmissions built between 1983 and 1996 where Dexron® (II or III) or Mercon are required. This product is approved for use in Allison heavy duty transmissions against TES 389. It is also approved for use in a wide range of european heavy duty automatic transmissions. It may be used in some power steering units. NB: Do not use where MERCON® V, MERCON® SP or DEXRON® VI is required.

 

Advantages

  • Multiple manufacturer approvals make it suitable for wide ranging use.
  • It is specifically formulated for high thermal stability and resistance to oxidation which protects against the formation of deposits and oil thickening prolonging the life of components and lubricant.
  • Optimised friction characteristics provide smooth shifting and efficient power transfer.
  • High viscosity index provides a stable viscosity over a wide temperature range for effective protection of transmissions and operation of power steering units

 

Product Performance Claims

  • Allison C4
  • Allison TES 389
  • Ford Mercon
  • GM Dexron IIIH
  • MAN 339 Z1, V1
  • MB-Approval 236.9
  • Voith H55.6335.xx
  • Volvo 97340
  • Volvo 97341
  • ZF TE-ML 04D, 14A, 17C
Discover More +
Castrol ATF Multivehicle - Automatic Transmission Fluid - 1723

Castrol ATF Multivehicle - Automatic Transmission Fluid - 1723

 

 

Description

Castrol ATF Multivehicle is an automatic transmission fluid for use in most Japanese passenger cars which typically have higher anti-shudder performance requirements than European or US designed automatic transmissions. It was designed to meet the Japanese Automobile Standards Organisation performance needs (JASO 1A) which is recognised by most Japanese Automobile Manufacturers.

 

Advantages

Castrol ATF Multivehicle is based on latest high performance additive technology in high quality base stocks to ensure:
Exceptional high temperature protection to effectively resist fluid oxidation (excellent viscosity stability)
Enhanced friction durability for smooth transmission performance to control transmission shudder
Superb low temperature fluidity for cold weather shifting

 

Product Performance Claims:

  • JASO 1A

Suitable for use where one of the following specifications is needed:

  • Aisin Warner JWS 3309
  • Toyota Type T, T-II, T-III, T-IV
  • Jatco Automatic Transmission
  • Nissan Matic Fluid C, D, J
  • Mitsubishi Diamond SP-II, SP-III
  • Suzuki ATF Oil and ATF Oil Special
  • Mazda ATF D-III and ATF M-3
  • Daihatsu Alumix ATF Multi
  • Honda ATF Z-1 (not for CVT-transmissions)
  • Subaru ATF
  • Hyundai
  • Kia
  • GM
  • Daewoo
Discover More +
Castrol Transmax Z - Full Synthetic Automatic Transmission Fluid - 1745

Castrol Transmax Z - Full Synthetic Automatic Transmission Fluid - 1745

 

Full Synthetic Automatic Transmission Fluid

 

Applications

Castrol Transmax Z is recommended for all buses and coaches fitted with automatic and semi-automatic transmissions and may also be used in manual transmissions. As such it is recommended for fleets employing a mixture of Voith, Renk, ZF, Allison and MB transmissions alongside the Leyland Pneumocyclic and Hydracyclic units. Extended oil drain [120.000 km] in ZF Ecomat MB AT and Voith AT

 

Features / Benefits

  • Excellent thermal and oxidative stability giving cleanliness reducing servicing and giving extended drain performance.
  • Excellent temperature reduction through reduced friction giving reduced emissions and fuel economy.
  • Optimised frictional characteristics providing smoother gear changes and much less wear.
  • Outstanding cold flow properties giving high protection to transmission especially at start-up.
  • Unique shear stability properties - constant viscosity during oil life.
  • Excellent anti-foam behaviour.
  • Good extreme pressure and anti-wear performance for longer transmission life.
  • Very good seal performance reducing oil leakages therefore reducing repair costs.
  • Free from chlorine and heavy metals for reduced environmental impact.

 

Specifications / Performance

  • MB-Approval 236.81
  • MAN 339 Typ Z3 V2
  • ZF TE-ML 11B, 14C, 16M
  • Voith H55.633535, H55.633635
  • VW 501 60
Discover More +
Castrol Axle EPX 80W-90 - Automotive Gear Oils - 1803

Castrol Axle EPX 80W-90 - Automotive Gear Oils - 1803

 

DESCRIPTION
Castrol AXLE EPX 80W-90 and EPX 85W-140 are extreme pressure multigrade gear oils which are based upon highly refined mineral oils and incorporate extreme pressure additives, corrosion and oxidation inhibitors and anti-foam agents.

 

APPLICATION
Developed for the lubrication of spiral bevel and hypoid differentials, they are also suitable for the lubrication of manual transmissions where the manufacturer recommends the use of an oil to API GL5 performance level.

 

FEATURES BENEFITS
• Load carrying performance to API GL5 - Provides excellent protection to gears operating under the most severe service conditions
• Multigrade characteristics give wide operating temperature range - Benefits in low temperature performance.

 

PERFORMANCE
API Service Level
GL5
ZF TE-ML 01/05/07 (Page 2) Approved

Discover More +
Castrol Axle EPX 85W-140 - Gear Oils - 1805

Castrol Axle EPX 85W-140 - Gear Oils - 1805

 

DESCRIPTION
Castrol AXLE EPX 80W-90 and EPX 85W-140 are extreme pressure multigrade gear oils which are based upon highly refined mineral oils and incorporate extreme pressure additives, corrosion and oxidation inhibitors and anti-foam agents.

 

APPLICATION
Developed for the lubrication of spiral bevel and hypoid differentials, they are also suitable for the lubrication of manual transmissions where the manufacturer recommends the use of an oil to API GL5 performance level.

 

FEATURES BENEFITS
• Load carrying performance to API GL5 - Provides excellent protection to gears operating under the most severe service conditions
• Multigrade characteristics give wide operating temperature range - Benefits in low temperature performance.

 

PERFORMANCE
API Service Level
GL5
ZF TE-ML 01/05/07 (Page 2) Approved

Discover More +
Castrol Axle Z Limited Slip 90 - Axle Fluid for limited slip differentials - 180

Castrol Axle Z Limited Slip 90 - Axle Fluid for limited slip differentials - 1806

 

DESCRIPTION

Castrol Axle Z Limited Slip 90 is a mineral oil based gear oil which is suitable for use in limited slip differentials in cars and commercial vehicles where API GL-5 oils with specific limited slip friction performance is required; it can also be used in conventional differentials. It is approved by ZF for use in their multi-disc wet brakes and self-locking differentials used in a range of commercial vehicle applications including axles in off-road and agricultural equipment.

 

ADVANTAGES

  • Optimised and stable friction characteristics for effective operation of limited slip differentials throughout the drain interval.
  • Very good wear protection, even under severe conditions, prolongs component life.
  • Specifically formulated to meet friction requirements of ZF wet brakes and locking differentials.

 

PRODUCT PERFORMANCE CLAIMS

  • API GL-5
  • ZF TE-ML 05C, 12C, 16E, 21C
Discover More +
Castrol Syntrax Universal Plus 75W-90 - Universal Fluid for manual transmissions

Castrol Syntrax Universal Plus 75W-90 - Universal Fluid for manual transmissions and axles - 1815

 

DESCRIPTION

Castrol Syntrax Universal Plus 75W-90 is a full synthetic multipurpose manual transmission and final drive lubricant. It may be used in synchronised manual transmissions and final drives/differentials of a wide range of vehicles (commercial vehicle, construction equipment, passenger cars) where API GL-4 or API GL-5 fluids are required and it carries a number of approvals.

 

ADVANTAGES

  • A single product for transmissions and final drives reducing inventory and the potential for misapplication
  • Excellent low temperature fluidity provides improved shift quality and wear protection in cold conditions and improves fuel efficiency.
  • Superior high temperature stability and excellent wear protection even in the most arduous conditions prolongs equipment life and allows for extended drain intervals.
  • Full compatibility with conventional mineral oils and seals allows this product to be used in a wide range of applications.

 

PRODUCT PERFORMANCE CLAIMS

  • API GL-4/ GL-5/ MT-1
  • SAE J2360
  • MAN M 3343 S, MAN 341 E3
  • MB-Approval 235.8
  • Scania STO 1:0
  • ZF TE-ML 02B, 05B, 12B, 16F, 17B, 19C, 21B
  • Eaton Transmissions (Europe) approved for 300.000 km drain
Discover More +
Castrol Syntrans Multivehicle 75W-90 - Manual Transmission Fluid - 1817

Castrol Syntrans Multivehicle 75W-90 - Manual Transmission Fluid - 1817

 

DESCRIPTION

Castrol Syntrans Multivehicle 75W-90 is a full synthetic SAE 75W-90 manual transmission fluid recommended for most manual transmissions where API GL-4 lubricants are required. It has been successfully used as a problem solver for low temperature shift ability issues in the manual transmissions of a number of manufacturers.

 

ADVANTAGES

  • Excellent synchroniser performance giving extended synchroniser life and shift comfort.
  • Exceptional cold flow properties giving smoother gear shift at low temperatures.
  • High shear stability giving a constant viscosity during oil life and noise reduction.
  • Excellent thermal and oxidative stability for transmission cleanliness and longer oil life.
  • Temperature reduction in operation prolongs the life of lubricant and aids fuel efficiency.

 

PRODUCT PERFORMANCE CLAIMS:

  • API GL-3 / GL-4
Discover More +
Castrol Syntrans Transaxle 75W-90 - Manual Transmission Fluid - 1818

Castrol Syntrans Transaxle 75W-90 - Manual Transmission Fluid - 1818

 

DESCRIPTION

Castrol Syntrans Transaxle 75W-90* is a full synthetic gear oil designed to provide enhanced EP performance compared with a conventional GL-4 fluid in combination with synchroniser compatibility; it is approved against VW 501.50 and is suitable for use in transaxles, manual gearboxes, transfer boxes and final drives where an API GL-4 lubricant is specified.
(*SAE class according to SAE J306 pre 2005)

 

ADVANTAGES

  • Excellent anti wear/EP and synchroniser performance makes it ideal for use in transaxles.
  • Better protection leads to longer transmission life and performance.
  • Excellent shift quality especially at low temperatures improves driver comfort.
  • Low temperature fluidity improves wear protection at start up and offers the potential for fuel savings.
  • Temperature reduction in operation extends oil and component life and aids fuel efficiency/ emissions reduction.
  • Very good high temperature stability gives excellent transmission cleanliness prolonging the life of lubricant and Transmission

 

PRODUCT PERFORMANCE CLAIMS:

  • API GL-4+
  • VW 501.50
Discover More +
Castrol Syntrans Z Longlife 75W-80 - Manual Transmission Fluid - 1819

Castrol Syntrans Z Longlife 75W-80 - Manual Transmission Fluid - 1819

 

DESCRIPTION

Castrol Syntrans Z Long Life 75W-80 is a full synthetic SAE 75W-80 fluid developed specifically to meet ZF extended drain intervals requirements (500.000 km) and is approved for use in all ZF commercial manual and automated manual transmissions. It can be recommended in other manual transmissions requiring API GL-4 and is particularly suitable for severe applications where loads and temperatures are higher

 

ADVANTAGES

  • Excellent frictional characteristics with carbon, sinter bronze and molybdenum synchronisers provides improved shift quality and extends component life.
  • Temperature reduction in operation extends the life of the oil and components aiding extended drain intervals and reducing downtime and repair costs.
  • Provides excellent low temperature fluidity giving improved protection and smooth gear shifts at low temperatures.
  • Excellent thermal and oxidative stability extends the life of transmission and lubricant extending drain intervals and reducing service needs.
  • Excellent wear and EP performance provides protection to components under high loads extending component life and reducing maintenance costs.

 

PRODUCT PERFORMANCE CLAIMS

  • API GL-4
  • MAN 341 Z5
  • ZF TE-ML 01E, 02E, 16P
Discover More +
Castrol Syntrax Longlife 75W-90 - Axle fluid (Multivehicle) - 1820

Castrol Syntrax Longlife 75W-90 - Axle fluid (Multivehicle) - 1820

 

Castrol Syntrax™ Longlife 75W-90 is a full synthetic multigrade final drive lubricant. It is Castrol’s prime recommendation for final drives in heavy commercial vehicles, and is approved by MAN, Scania and ZF. Specially designed and approved by BMW for use in all BMW final drives fitted with conventional (non limited slip) differentials.

 

Applications

Castrol Syntrax Longlife 75W-90 is Castrol’s prime recommendation for final drives in heavy commercial vehicles, and is approved by MAN, Scania and ZF. Specially designed and approved by BMW for use in all BMW final drives fitted with conventional (non limited slip) differentials.

 

Specifications

  • API GL-5

OEM Approvals:

  • MAN 342 Typ S1
  • Scania STO 1:0
  • ZF TE-ML TE-ML 05B, TE-ML 12B, TE-ML 17B, TE-ML 19C, TE-ML 21B
  • BMW (Non LS Rear Axles)

 

Advantages

  • Fuel savings and reduced emissions due to balanced viscometric and frictional characteristics.
  • Superior low temperature fluidity pumpability helps ensure optimum protection at start up under all conditions.
  • Excellent thermal and oxidative stability provides final drive and differential cleanliness which permits extended drain and decreased servicing.
  • Optimal anti-wear, extreme pressure performance at all ambient temperatures and load conditions.
  • Excellent temperature reduction and shear stability enhance final drive performance and helping extend component life.
Discover More +
Castrol Syntrax Limited Slip 75W-140 - Axle Fluid for Limited Slip Differentials

Castrol Syntrax Limited Slip 75W-140 - Axle Fluid for Limited Slip Differentials - 1821

 

DESCRIPTION

Castrol Syntrax Limited Slip 75W-140 is a full synthetic hypoid gear oil formulated for use in both conventional and limited slip differentials. It has demonstrated outstanding performance in competition vehicles employing limited slip differentials. It is approved for use in the high performance BMW-M Series and Mercedes Benz AMG limited slip differentials.

 

ADVANTAGES

  • Reduces noise and vibrations in the axle.
  • Excellent shear stability maintaining performance over the life of the lubricant.
  • Exceptional stability at high temperatures extending the life of lubricant and axle.
  • Effective wear resistance ensures protection under high loads and prevents damage to components.
  • Very good low temperature fluidity properties increases protection at start up.

 

PRODUCT PERFORMANCE CLAIMS:

  • API GL-5
  • MB-Approval 235.61
  • ZF TE-ML 05D, 12D, 16G, 21D
  • BMW LS Rear Axles
  • Recommended for Nissan GTR limited slip axles

 

Pack sizes available - 12x1ltr, 20ltr

Discover More +
BP Autran MBX

BP Autran MBX

 

Applications

Autran MBX is recommended for most power shift transmissions, power steering and hydraulic units.
Do NOT use where Type F, MERCON® V, MERCON® SP or DEXRON® VI fluids are required. Autran MBX is also recommended for use in the automatic transmissions and power steering fitted to many other types of vehicle, including later Fords where fluid to ESP-M2C166-H or SQM-2C9010-A is specified.
Also for semiautomatic transmissions where a Leyland spec E fluid is specified.

 

Features / Benefits

• Meeting most manufacturers specifications, it can be used to rationalise fleet requirements and reduces the chance of incorrect application.
• Enhanced friction characteristics and wear protection combined with excellent low temperature fluidity and high thermal stability ensures that it provides protection against rust and corrosion and prolongs component life.
• Effective seal compatibility reduces the risk of leakages.

 

Specifications / Performance

• Ford MERCON (M2C-166H / M2C 138J)
• Dexron IID
• Allison C4
• Caterpillar TO-2
• MB - Approval 236.6
• MAN 339 Type V1 and Z1

Discover More +
BP Energear EP 80W - Automotive Transmission Oil

BP Energear EP 80W - Automotive Transmission Oil

 

Applications

Designed for use in a wide range of gear units with spur, bevel or helical gear design, including synchronized manual gearboxes, transmissions and axles under moderately severe load and pressure conditions.
It is applicable equally for passenger cars, light and heavy trucks, agricultural and building machinery, even for topping up well run-in hypoid transmission units.

 

Main Benefits

• High safety margin against foaming and corrosion.
• Reasonable viscosity/temperature and cold flow properties;
• Compatible with all seal and metal types Offers effective protection of gear transmissions prolonging component life

 

Specifications

• GL-4
• MAN 341N,
• ZF TE-ML 02A and 17A
• MB235.1

Discover More +
BP Energear EP 80W-90 - Automotive Gear Oil

BP Energear EP 80W-90 - Automotive Gear Oil

 

Applications

Designed for use in a wide range of gear units with spur, bevel or helical gear design, including synchronized manual gearboxes, transmissions and axles under moderately severe load and pressure conditions.
It is applicable equally for passenger cars, light and heavy trucks, agricultural and building machinery, even for topping up well run-in hypoid transmission units.

 

Main Benefits

  • High safety margin against foaming and corrosion.
  • Reasonable viscosity/temperature and cold flow properties;
  • Compatible with all seal and metal types Offers effective protection of gear transmissions prolonging component life

 

Specifications

The Energear EP range meet the requirements of
API GL-4.
The 80W-90 grade also meets ZF TE
ML 02A,16A and 17A

Discover More +
BP Energear Hypo 80W-90 - Extreme-Pressure Automotive Multigrade Gear Oil

BP Energear Hypo 80W-90 - Extreme-Pressure Automotive Multigrade Gear Oil

 

Applications

Energear Hypo are designed for use in hypoid, bevel and spiral gear units, axles and final drives operating under severe conditions and over a wide spectrum of operating temperatures.
Through their multigrade viscosity characteristics, they meet the requirements of several automotive manufacturers for cars, vans and commercial trucks or buses.
For synchronized manual gearboxes, they should be used only if lubricants of API GL-5 performance level are explicitly recommended for such units.

 

Main Benefits

• Superior viscosity / temperature characteristics offering excellent cold flow properties and enhanced thermal stability.
• Excellent resistance to foaming and corrosion.
• Formulated from high quality base oils and employing sulphur / phosphorous EP additive technology.
• Compatible with the conventional seal materials used with mineral oils.
• Provides effective wear protection even under severe load conditions ensuring longer component life and allowing it to be used in the final drives of most vehicles in a wide range of operating temperatures.

 

Specifications

• API GL-5
• ZF TE-ML 05A,07A,12A,16B,17B (SAE 80W-90)
• ZF TE-ML 05A,07A,12A,16D,17B (SAE 85W-140)

Discover More +
BP Energear SHX-M 75W-90 - Synthetic Gear and Axle Oil

BP Energear SHX-M 75W-90 - Synthetic Gear and Axle Oil

 

 

Applications

Energear SHX-M is a fully synthetic, multi –purpose heavy duty automotive gear lubricant for use in complete driveline applications requiring either API GL-4 or GL-5 performance.
Careful selection of special high performance additives and synthetic base fluid technology gives Energear SHX -M exceptional low temperature fluidity whilst maintaining the compatibility and 'shiftability' requirements of most European synchromesh gear boxes.
It also provides the relatively high viscosity and load carrying characteristics necessary for heavy duty drive axles and transfercases.
It is fully compatible with conventional mineral oil based products, but its superior oxidative/thermal stability gives the potential for extended drain.
As an SAE 75W-90 grade, its low temperature flow properties deliver fuel economy benefits while its viscosity/temperature characteristics are suitable for year round use.
Energear SHX-M is recommended for service fill and top-up of commercial vehicle, construction equipment and passenger car manual transmissions, transfer cases and drive axles in DAF, Scania, Volvo, Eaton, Iveco and RVI equipment.

 

Main Benefits

• Improved fuel economy compared with conventional SAE 90 gear oils.
• Complete driveline lubrication enabling reduced product inventories.
• Easier operation of the transmissions provided by excellent low temperature fluidity giving improved gear changing from cold (compared to conventional SAE 80W & 90 grades.)
• Excellent wear protection even in the most severe applications allowing for prolonged component life and extended drain capability.
• Complete compatibility with conventional mineral oil based gear lubricants and with seals / materials used in automotive applications allows this to be used in a large number of applications.

 

Specifications

• GL-1, 2, 3, 4, 5 and MT-1
• MAN 3343 SL
• Scania STO:1
• ZF TE-ML 02B,05B,07A,12B,16F,17B
• MIL -PRF-2105E (SAE J2360)
• Eaton 300,000 km Drain

Discover More +
BP Energol GR-XP 150 - Premium Industrial Gear Oil

BP Energol GR-XP 150 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
BP Energol GR-XP 100 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 100 - Industrial Extreme Pressure Gear Oil

 

Description

The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
BP Energol GR-XP 460 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 460 - Industrial Extreme Pressure Gear Oil

 

Description
The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving
demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
BP Energol GR-XP 680 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 680 - Industrial Extreme Pressure Gear Oil

 

Description
The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving
demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
BP Vanellus Monograde 10W - Monograde diesel engine oil

BP Vanellus Monograde 10W - Monograde diesel engine oil

 

Applications
Vanellus Monograde 10W is designed for use in a wide range of applications that require a monograde oil
It is suitable for use in diesel and gasoline engines as well as certain transmission, hydraulic and other applications that specify a monograde engine oil.

 

Features / Benefits

  • Complete shear stability for “stay-in-grade” performance – equipment stays protected throughout its oil drain protection from wear and deposits – equipment is reliable and maintenance costs are reduced
  • Versatility – suitable for use in various applications

 

Specifications / Performance
Vanellus Monograde meets the following specifications

  • API CF/SG

Can be used for Caterpillar Transmissions requiring a T0-2 specification product

Discover More +
BP Vanellus Monograde 20W-20 - Monograde diesel engine oil

BP Vanellus Monograde 20W-20 - Monograde diesel engine oil

 

Applications
Vanellus Monograde 20W-20 is designed for use in a wide range of applications that require a monograde oil
It is suitable for use in diesel and gasoline engines as well as certain transmission, hydraulic and other applications that specify a monograde engine oil.

 

Features / Benefits

  • Complete shear stability for “stay-in-grade” performance – equipment stays protected throughout its oil drain
  • Protection from wear and deposits – equipment is reliable and maintenance costs are reduced
  • Versatility – suitable for use in various applications

 

Specifications / Performance

  • API CF/SG

Can be used for Caterpillar Transmissions requiring a T0-2 specification product

Discover More +
Total Carter EP 100 - Mineral oils for enclosed gears - 110483

Total Carter EP 100 - Mineral oils for enclosed gears - 110483

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter EP 150 - Mineral oils for enclosed gears - 110486

Total Carter EP 150 - Mineral oils for enclosed gears - 110486

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 220 - Mineral oils for enclosed gears - 110489

Total Carter EP 220 - Mineral oils for enclosed gears - 110489

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 320 - Mineral oils for enclosed gears - 110492

Total Carter EP 320 - Mineral oils for enclosed gears - 110492

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 460 - Mineral oils for enclosed gears - 110494

Total Carter EP 460 - Mineral oils for enclosed gears - 110494

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 68 - Mineral oils for enclosed gears - 110497

Total Carter EP 68 - Mineral oils for enclosed gears - 110497

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 680 - Mineral oils for enclosed gears - 110499

Total Carter EP 680 - Mineral oils for enclosed gears - 110499

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Fluide ATX - Automatic Transmission Fluid - 110585

Total Fluide ATX - Automatic Transmission Fluid - 110585

 

Applications:

  • Automatic or semi-automatic transmissions and torque converters of passenger cars, light commercial vehicles and industrial vehicles, when the manufacturer requires an ATF (Automatic Transmission Fluid) GM DEXRON-IID. Not suitable when a fluid type FORD M2C-33F or G is required.
  • Manual gear boxes when an ATF fluid is required.
  • Hydrostatic transmissions.
  • Power steering.
  • Hydraulic systems when a fluid type GM DEXRON-IID is required.

 

Properties:

  • Very high viscosity index linked with an excellent viscosity stability in operation.
  • Very low pour point.
  • Very good thermal stability.
  • Excellent resistance to oxidation.
  • Friction properties specific to the requirements of GENERAL MOTORS Hydramatic.
  • Viscosity adapted to MERCEDES requirements MBApproval 236.6.

 

Performance:

  • BMW group 23 - 3.0 and 24 - 3.0
  • FORD MERCON
  • DEXRON-IID
  • MAN 339 type Z-1 (ex MAN 339 type D)
  • MAN 339 type V-1 (ex MAN 339 type D)
  • MB-Approval 236.6
  • VOITH H 55.6335
  • PSA PEUGEOT CITROËN S71 2102
  • ZF TE-ML 03D, 04D, 09, 11A, 14A, 17C

 

Pack sizes available - 18x1L, 20L, 208L drums, bulk delivery

Discover More +
Total Fluide II D - Fluid for automatic transmissions and hydraulic systems - 11

Total Fluide II D - Fluid for automatic transmissions and hydraulic systems - 110594

 

Applications:

  • Automatic or semi-automatic transmissions and torque converters of passenger cars, light commercial vehicles and industrial vehicles, when the manufacturer requires an ATF (Automatic Transmission Fluid) GM DEXRON-IID.
  • Manual gear boxes when an ATF fluid is required.
  • Hydrostatic transmissions.
  • Power steering.
  • Hydraulic systems when a fluid type GM DEXRON-IID is required.

 

Properties:

  • Very high viscosity index linked with an excellent viscosity stability in operation.
  • Very low pour point.
  • Very good thermal stability.
  • Excellent resistance to oxidation.
  • Friction properties specific to the requirements of GENERAL MOTORS Hydramatic.

 

Performance:

Homologated - MAN 339 Type Z-1 & V-1, VOITH H 55.633535, ZF TE-ML 04D, 09, 14A, 17C, MB-Approval 236.9

Meets the specific requirements - GM DEXRON IID, FORD MERCON

 

Pack sizes available - 20L, 208L drums, bulk delivery

Discover More +
Total Carter SY 320 - Synthetic lubricant (polyglycol) - 112371

Total Carter SY 320 - Synthetic lubricant (polyglycol) - 112371

 

Applications:

  • Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).
  • Lubrication of worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • NF-ISO 6743-6 category CKS/CKT

Manufacturers: DAVID BROWN, CMD

 

Advantages:

  • Very high and shear stable viscosity index.
  • Low coefficient of friction: greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil.
  • Excellent thermal stability: extended oil lifetime.
  • Very good foaming behaviour.
  • Excellent extreme pressure and anti-wear properties.
  • Very high level corrosion protection (tested with sea and acidic water).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter SY 460 - Synthetic lubricant (polyglycol) - 112373

Total Carter SY 460 - Synthetic lubricant (polyglycol) - 112373

 

Applications:

  • Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).
  • Lubrication of worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • NF-ISO 6743-6 category CKS/CKT

Manufacturers: DAVID BROWN, CMD

 

Advantages:

  • Very high and shear stable viscosity index.
  • Low coefficient of friction: greater protection for non-ferrous parts, such as the bronze ring gear in worm gears systems, offering an energy saving of between 5 and 10% compared with a mineral oil.
  • Excellent thermal stability: extended oil lifetime.
  • Very good foaming behaviour.
  • Excellent extreme pressure and anti-wear properties.
  • Very high level corrosion protection (tested with sea and acidic water).

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter SH 1000 - Synthetic oil - 120615

Total Carter SH 1000 - Synthetic oil - 120615

 

Synthetic oil (PAO) for enclosed gears.

 

Applications:

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.
- bevel and spur gears
- Heavily loaded bearings and gear couplings.

 

Specifications:

  • DIN 51517 Part 3 ⇒group CLP
  • NF-ISO 6743-6 category CKD

Manufacturers Approval:

  • AISI 224
  • CINCINNATI MILACRON
  • DAVID BROWN
  • FLENDER
  • USINOR FT 161
  • MÜLLER WEINGARTEN
  • AGMA 9005 - E02

 

Advantages:

  • Very high protection (high and low temperatures) from micropitting scuffing wear (GFT - class: high).
  • Excellent extreme-pressure performance: protection against high loads.
  • Very high natural viscosity index: (shear stable) and low friction coefficient.
  • Very low pour point: operation at very low temperatures.
  • Very good resistance to oxidation: operation at high temperatures, and lifetime increased by a factor of 2 to 4.
  • Compatible with seals and metals containing copper.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter SH 460 - Synthetic oil - 120616

Total Carter SH 460 - Synthetic oil - 120616

 

Synthetic oil (PAO) for enclosed gears.

 

Applications:

TOTAL CARTER SH has been developed for enclosed industrial gears to provide optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.
- bevel and spur gears
- Heavily loaded bearings and gear couplings.

 

Specifications:

  • DIN 51517 Part 3 ⇒group CLP
  • NF-ISO 6743-6 category CKD

Manufacturers Approval:

  • AISI 224
  • CINCINNATI MILACRON
  • DAVID BROWN
  • FLENDER
  • USINOR FT 161
  • MÜLLER WEINGARTEN
  • AGMA 9005 - E02

 

Advantages:

  • Very high protection (high and low temperatures) from micropitting scuffing wear (GFT - class: high).
  • Excellent extreme-pressure performance: protection against high loads.
  • Very high natural viscosity index: (shear stable) and low friction coefficient.
  • Very low pour point: operation at very low temperatures.
  • Very good resistance to oxidation: operation at high temperatures, and lifetime increased by a factor of 2 to 4.
  • Compatible with seals and metals containing copper.

 

Pack sizes available - 20L, 208L drums, 1000L IBC

Discover More +
Total Fluidematic SYN - Synthetic Based Automatic Transmission Fluid - 120790

Total Fluidematic SYN - Synthetic Based Automatic Transmission Fluid - 120790

 

Applications:

  • Automatic transmissions and torque converters of commercial vehicles and industrial vehicles.
  • When the manufacturer requires an ATF (Automatic Transmission Fluid) meeting GM DEXRON-III.

 

Properties:

  • Very high viscosity index.
  • Very low pour point.
  • Excellent resistance to oxidation.
  • Fuel saving.

 

Performance:

  • DEXRON III-G
  • ALLISON C4 N° C4-30734001
  • MAN 339 type V-1 (ex MAN 339 Type F)
  • MAN 339 type Z-2 (ex MAN 339 Type F)
  • MB-Approval 236.5
  • VOITH H 55.633535
  • ZF TE-ML 14B, 16L

 

Pack sizes availalbe - 208L drums, bulk delivery

Discover More +
Total Carter ENS-EP 700 Aerosol - Lubricant - 140084

Total Carter ENS-EP 700 Aerosol - Lubricant - 140084

 

Lubricant coating for open gears wire ropes.

 

Applications:

CARTER ENS/EP 700 is used for lubricating:

  • Open gears rotating at low speed and high power
  • Ring gears
  • Racks and guide rails
  • Wire ropes and chains

CARTER ENS/EP 700 is made fluid by a volatile solvent to facilitate application (as an aerosol).

 

Specifications:

NF-ISO 8743-6 category CKJ-DIL

 

Advantages:

  • Excellent adherence of the lubricant film to the metal even at high temperature.
  • High anti-wear and EP properties: protects moving parts against wear and shocks.
  • Very tough film: protects metal surfaces exposed to water, abrasive dust and corrosive fumes.
  • Reduces noise and vibration.
  • Film shows good elasticity at low temperature, avoiding any phenomena of cracking or spalling.

 

Pack size available - 4x400ml

Discover More +
Total Carter ENS-EP 700 - Lubricant - 146228

Total Carter ENS-EP 700 - Lubricant - 146228

 

Lubricant coating for open gears wire ropes.

 

Applications:

CARTER ENS/EP 700 is used for lubricating:

  • Open gears rotating at low speed and high power
  • Ring gears
  • Racks and guide rails
  • Wire ropes and chains

 

Specifications:

NF-ISO 8743-6 category CKJ-DIL

 

Advantages:

  • Excellent adherence of the lubricant film to the metal even at high temperature.
  • High anti-wear and EP properties: protects moving parts against wear and shocks.
  • Very tough film: protects metal surfaces exposed to water, abrasive dust and corrosive fumes.
  • Reduces noise and vibration.
  • Film shows good elasticity at low temperature, avoiding any phenomena of cracking or spalling.

 

Pack sizes available - 180kg drums

Discover More +
Total Marine Stern Tube Heavy - Marine - 169344

Total Marine Stern Tube Heavy - Marine - 169344

 

To lubricate stern tube bearings and provide a seal against water entry into vessel.

 

Applications:

  • Heavy grade ISO 680

 

Advantages:

  • Good emulsification
  • High film strength and spreading ability
  • Resistance to scouring
  • Extreme pressure performance
  • Thermal stability

 

Pack sizes available - 20L

Discover More +
Castrol ATF Dex II Multivehicle - Automatic Transmission Fluid - 1802

Castrol ATF Dex II Multivehicle - Automatic Transmission Fluid - 1802

 

Castrol ATF Dex II Multivehicle is an Automatic Transmission Fluid which may be used in automatic transmissions and power steering units of many types of vehicle where Dexron IID or Mercon performance is required. It is also approved for use in many european heavy duty automatic transmissions and Mercedes Benz manual transmissions.

Available in: 12x1L, 4x5L, 20L, 208L Drum, Bulk

 

  • Multiple approvals provide wide ranging use.
  • Ensures efficient operation of power steering units under all conditions.
  • High thermal stability protects against deposits and oil thickening prolonging the life of components and lubricant.
  • Enhanced friction characteristics and wear protection maintain effective operation of equipment.
  • Effective seal compatibility reduces the risk of leakages

 

Product Performance Claims:
MAN 339 Z1, V1
MB-Approval 236.6
Voith H55.6335.xx
Meets Ford Mercon
GM Dexron IID
ZF TE-ML 03D, 04D, 11A, 14A, 17C

Discover More +
Castrol Syntrax Universal 80W-90 - Universal fluid for manual transmissions and

Castrol Syntrax Universal 80W-90 - Universal fluid for manual transmissions and axles - 1823

 

Castrol Syntrax Universal 80W-90 is a part-synthetic SAE 80W-90 multipurpose manual transmission and final drive lubricant. It is particularly recommended for use in highly loaded final drives and differentials of commercial vehicles where API GL-5 performance is required and it carries a number of approvals. Additionally it may be used in synchronised manual transmissions requiring API GL-4 or GL-5 fluids.

 

Advantages:

  • A single product for transmissions and final drives reducing inventory and the potential for misapplication
  • High temperature stability gives superior performance and extended drain potential.
  • Proven performance as a problem solver in differentials operating in hot climates under arduous conditions.
  • Optimised synchroniser performance gives smooth gear shifting at all temperatures.
  • High shear stability maintains performance over the life of the lubricant.
  • Excellent wear protection particularly at high temperatures extends component life and reduces maintenance costs

 

Product Performance Claims:

  • API GL-4/GL-5
  • MAN 341 Typ E2 M 3343 Typ M
  • MB-Approval 235.0
  • Scania STO 1:0
  • ZF - TE-ML 02B
  • ZF - TE-ML 05A
  • ZF - TE-ML 12E
  • ZF - TE-ML 16C
  • ZF - TE-ML 17B
  • ZF - TE-ML 19B
  • ZF - TE-ML 21A

 

Pack sizes available - 20ltr, 208ltr, bulk delivery

Discover More +
Castrol Hypoy LS 85W140 - Automotive Limited Slip Gear Oil - 1846

Castrol Hypoy LS 85W140 - Automotive Limited Slip Gear Oil - 1846

 

Castrol Hypoy LS is a mineral oil based SAE 85W-140 extreme pressure gear lubricant designed to cope with the special friction characteristics of limited slip differentials and associated hypoid gears.

 

Application

Castrol Hypoy LS has been particularly developed for use in limited slip rear axles fitted to high performance cars.

 

Hypoy LS can be used where the following performance standards are specified:

  • API Service GL5

 

Pack sizes available - 208ltr drums

Discover More +
Castrol Syntrans 75W-85 - Manual Transmission Fluid - 1866

Castrol Syntrans 75W-85 - Manual Transmission Fluid - 1866

 

Castrol Syntrans 75W-85 is a full synthetic transmission fluid recommended for most commercial vehicle manual transmissions (truck, bus, light commercial vehicle) where API GL-4 lubricants are required. These transmissions are generally larger and subjected to higher loads and temperatures than those in passenger cars: this product was developed for these particular requirements and is approved by a number of manufacturers.

 

  • Excellent thermal and oxidative stability maintains transmission cleanliness and lubricant performance allowing extended drain capability.
  • Synthetic formulation provides a reduction in operating temperatures giving longer component and lubricant life.
  • Superb cold flow characteristics give smoother gear shifts at low temperatures.
  • High shear stability maintains lubricant performance throughout the drain interval.
  • Good wear and EP performance ensures component protection under high load conditions reducing downtime and service costs.

 

Product Performance Claims:
API GL-4
MAN 341 E4
MB-Approval 235.4
Volvo 97307
Eaton 500,000km drain Europe (service bulletin 2273)

 

Pack sizes available - 20ltr

Discover More +
Castrol Syntrans Z 75W-80 - Manual Transmission Fluid - 1871

Castrol Syntrans Z 75W-80 - Manual Transmission Fluid - 1871

 

Castrol Syntrans Z 75W-80 is a Semi-synthetic Transmission Fluid for use in manual transmissions including those equipped with Re-/Intarder, mechanical non-synchronised transmissions, steering systems and supplementary transmissions; it can also be used in cases where the use of higher viscosity single-grade API GL4 fluids can cause shift problems.

 

 

  • Excellent synchroniser performance improves shift quality and improves fuel economy over conventional gear lubricants.
  • Exceptional temperature reduction through reduced friction gives longer oil and component life.
  • Outstanding antiwear performance provides protection to components especially under high load, reducing downtime and repair costs.
  • High shear stability - constant viscosity during oil life enhances performance and life of components.
  • Excellent thermal and oxidative stability gives excellent transmission cleanliness and extended drain capability.

 

Pack sizes available - 208ltr drums

Discover More +
Castrol EPX 85W-140 - Automotive Gear Oils - 1894

Castrol EPX 85W-140 - Automotive Gear Oils - 1894

 

Castrol EPX 85W-140 are extreme pressure multigrade gear oils which are based upon highly refined mineral oils and incorporate extreme pressure additives, corrosion and oxidation inhibitors and anti-foam agents.

 

Application

Developed for the lubrication of spiral bevel and hypoid differentials, they are also suitable for the lubrication of manual transmissions where the manufacturer recommends the use of an oil to API GL5 performance level.

 

Advantages:

  • Load carrying performance to API GL5
  • Provides excellent protection to gears operating under the most severe service conditions
  • Multigrade characteristics give wide operating temperature range
  • Benefits in low temperature performance

 

PERFORMANCE:
API Service Level GL5
ZF TE-ML 01/05/07 (Page 2) Approved

 

Pack sizes available - 20ltr

Discover More +
Castrol Manual EP 80W-90 - Manual Transmission Fluid - 1896

Castrol Manual EP 80W-90 - Manual Transmission Fluid - 1896

 

Castrol Manual EP 80W-90 is a mineral based fluid suitable for use in applications where API GL-4 performance is required. Approved for use in ZF manual transmissions.

 

  • High thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission.
  • Good antiwear and load carrying characteristics extend the life of components.

 

Product Performance Claims:
API GL-4
ZF TE-ML 02B, 16A, 17A, 19A

 

Pack sizes available - 12x1ltr, 20ltr, 208ltr drums

Discover More +
Castrol Manual EP 80W - Manual Transmission Fluid - 1897

Castrol Manual EP 80W - Manual Transmission Fluid - 1897

 

Castrol Manual EP 80W is a mineral based fluid suitable for use in applications where API GL-4 performance is required. Manual EP 80W is approved for use in MB transmissions used in light commercial vehicles and trucks and also approved for use in ZF manual transmissions.

 

Advantages:

  • Wide range of european OEM approvals.
  • High thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission.
  • Good antiwear and load carrying characteristics extend the life of components.

 

Product Performance Claims:
API GL-4
MAN 341 Z1, E1
MB-Approval 235.1
ZF - TE-ML 02B, 17A

 

Pack sizes available - 12x1ltr, 20ltr

Discover More +
Castrol Alpha SP 68 - Industrial Extreme Pressure Gear Oil - 3181

Castrol Alpha SP 68 - Industrial Extreme Pressure Gear Oil - 3181

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 100 - Industrial Extreme Pressure Gear Oil - 3182

Castrol Alpha SP 100 - Industrial Extreme Pressure Gear Oil - 3182

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 150 - Industrial Extreme Pressure Gear Oil - 3183

Castrol Alpha SP 150 - Industrial Extreme Pressure Gear Oil - 3183

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 220 - Industrial Extreme Pressure Gear Oil - 3184

Castrol Alpha SP 220 - Industrial Extreme Pressure Gear Oil - 3184

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 320 - Industrial Extreme Pressure Gear Oil - 3185

Castrol Alpha SP 320 - Industrial Extreme Pressure Gear Oil - 3185

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 460 - Industrial Extreme Pressure Gear Oil - 3186

Castrol Alpha SP 460 - Industrial Extreme Pressure Gear Oil - 3186

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Castrol Alpha SP 680 - Industrial Extreme Pressure Gear Oil - 3187

Castrol Alpha SP 680 - Industrial Extreme Pressure Gear Oil - 3187

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +
Total Transmission TM Multigrade 80W-90 - Gear Oil - 110861

Total Transmission TM Multigrade 80W-90 - Gear Oil - 110861

 

Applications:

  • Oil specially adapted to very stringent requirements; when very high Extreme-Pressure and antiwear levels are aimed in high temperature conditions.
  • Manual gear boxes, transfer boxes, rear axles and differentials when an oil API GL-5 is required.
  • Passenger cars, light commercial, industrial vehicles and trucks.

 

Specifications:

  • API GL-5

 

Advantages:

  • SAE 80W-90 super multigrade: Total Transmission TM Multigrade viscosity is especially low at cold temperatures which leeds to a super SAE 80W (at -26°C its viscosity is 40 000 mPa.s to be compared with 150 000 mPa.s maxi for the 80W grade).
  • Very high viscosity index providing an excellent lubrication and allowing easy gear changes at low temperatures as well as at high temperatures.
  • Very high Extreme-Pressure properties.
  • Exceptional stability in operation.
  • Excellent resistance to oxidation.
  • Excellent antiwear, antifoam, anticorrosion and antirust properties.

 

Pack sizes available - 18x1ltr, 3x5ltr, 20ltr, 208ltr drum, 1000ltr IBC, bulk delivery

Discover More +
Castrol MHP 153 - Diesel engine lubricants - 5022

Castrol MHP 153 - Diesel engine lubricants - 5022

 

MHP 153 and 154 are high performance lubricants specifically developed for use in modern highly rated marine and power generation four-stroke engines operating on distillate fuels.

Available in: 208L Drums, Bulk

 

Application

MHP is suitable for use in medium to highly-rated marine trunk piston engines operating with ISO 8217 type DMA/DMZ/DMB/RMA10 fuels and require API CF performance. MHP has high load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.

 

 

User benefits include:

  • Enhanced detergency, excellent thermal and oxidative stability.
  • Enhanced performance at high temperatures.
  • High load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.
  • Cleaner piston ring belts.
  • Excellent engine cleanliness.
  • Reduced maintenance and wear.
  • Improved resistance to liner lacquering.
  • Extended time between overhauls.

 

Approval Status:

MHP exceeds the specifications of API CF and is fully approved by major marine engine makers worldwide.

Discover More +
Castrol MHP 154 - Diesel engine lubricants - 5023

Castrol MHP 154 - Diesel engine lubricants - 5023

 

MHP 153 and 154 are high performance lubricants specifically developed for use in modern highly rated marine and power generation four-stroke engines operating on distillate fuels.

Available in: 208L Drums, Bulk

 

Application

MHP is suitable for use in medium to highly-rated marine trunk piston engines operating with ISO 8217 type DMA/DMZ/DMB/RMA10 fuels and require API CF performance. MHP has high load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.

 

 

User benefits include:

  • Enhanced detergency, excellent thermal and oxidative stability.
  • Enhanced performance at high temperatures.
  • High load carrying capabilities and superior gear performance that enables it to be used as a common oil for both engine and transmission systems.
  • Cleaner piston ring belts.
  • Excellent engine cleanliness.
  • Reduced maintenance and wear.
  • Improved resistance to liner lacquering.
  • Extended time between overhauls.

 

Approval Status:

MHP exceeds the specifications of API CF and is fully approved by major marine engine makers worldwide.

Discover More +