Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Brand...

Transmission & Gear Oils

BP Energol GR-XP 680 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 680 - Industrial Extreme Pressure Gear Oil

 

Description
The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving
demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
Total Carter EP 680 - Mineral oils for enclosed gears - 110499

Total Carter EP 680 - Mineral oils for enclosed gears - 110499

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Marine Stern Tube Heavy - Marine - 169344

Total Marine Stern Tube Heavy - Marine - 169344

 

To lubricate stern tube bearings and provide a seal against water entry into vessel.

 

Applications:

  • Heavy grade ISO 680

 

Advantages:

  • Good emulsification
  • High film strength and spreading ability
  • Resistance to scouring
  • Extreme pressure performance
  • Thermal stability

 

Pack sizes available - 20L

Discover More +
Castrol Alpha SP 680 - Industrial Extreme Pressure Gear Oil - 3187

Castrol Alpha SP 680 - Industrial Extreme Pressure Gear Oil - 3187

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +