Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Brand...

Transmission & Gear Oils

BP Energol GR-XP 150 - Premium Industrial Gear Oil

BP Energol GR-XP 150 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
Total Carter EP 150 - Mineral oils for enclosed gears - 110486

Total Carter EP 150 - Mineral oils for enclosed gears - 110486

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Castrol Alpha SP 150 - Industrial Extreme Pressure Gear Oil - 3183

Castrol Alpha SP 150 - Industrial Extreme Pressure Gear Oil - 3183

 

DESCRIPTION
Castrol Alpha SP gear oils are a range of high quality solvent refined mineral oils, fortified with sulphur-phosphorous compounds to impart anti-wear and extreme pressure properties.

 

APPLICATION
Castrol Alpha SP oils are recommended for the lubrication of industrial gearboxes with forced circulation or splash and oil bath lubrication.

 

FEATURES BENEFITS
• Excellent thermal stability and oxidation resistance = Long oil life
• Good water resistance and demulsification characteristics = Long oil life
• Rust and copper corrosion protection of metal surfaces = Less maintenance
• Lead-free additives = Avoids heavy metal contamination in the work place and environment

Castrol Alpha SP gear oils are fully approved by David Brown Gear Industries Limited.
Note - For applications where operating or ambient temperatures are higher than normal, the Castrol Alphasyn T range of synthetic gear oils is recommended.

 

ISO Viscosity Grades:
Alpha SP68, Alpha SP100, Alpha SP150 Alpha SP220 Alpha SP320 Alpha SP460 Alpha SP680

Available in 20L, 208L, IBC and Bulk

Discover More +