Kernow Oils - Lubricant Solutions

Transmission & Gear Oils

BP Autran MBX

BP Autran MBX

 

Applications

Autran MBX is recommended for most power shift transmissions, power steering and hydraulic units.
Do NOT use where Type F, MERCON® V, MERCON® SP or DEXRON® VI fluids are required. Autran MBX is also recommended for use in the automatic transmissions and power steering fitted to many other types of vehicle, including later Fords where fluid to ESP-M2C166-H or SQM-2C9010-A is specified.
Also for semiautomatic transmissions where a Leyland spec E fluid is specified.

 

Features / Benefits

• Meeting most manufacturers specifications, it can be used to rationalise fleet requirements and reduces the chance of incorrect application.
• Enhanced friction characteristics and wear protection combined with excellent low temperature fluidity and high thermal stability ensures that it provides protection against rust and corrosion and prolongs component life.
• Effective seal compatibility reduces the risk of leakages.

 

Specifications / Performance

• Ford MERCON (M2C-166H / M2C 138J)
• Dexron IID
• Allison C4
• Caterpillar TO-2
• MB - Approval 236.6
• MAN 339 Type V1 and Z1

Discover More +
BP Energear EP 80W - Automotive Transmission Oil

BP Energear EP 80W - Automotive Transmission Oil

 

Applications

Designed for use in a wide range of gear units with spur, bevel or helical gear design, including synchronized manual gearboxes, transmissions and axles under moderately severe load and pressure conditions.
It is applicable equally for passenger cars, light and heavy trucks, agricultural and building machinery, even for topping up well run-in hypoid transmission units.

 

Main Benefits

• High safety margin against foaming and corrosion.
• Reasonable viscosity/temperature and cold flow properties;
• Compatible with all seal and metal types Offers effective protection of gear transmissions prolonging component life

 

Specifications

• GL-4
• MAN 341N,
• ZF TE-ML 02A and 17A
• MB235.1

Discover More +
BP Energear EP 80W-90 - Automotive Gear Oil

BP Energear EP 80W-90 - Automotive Gear Oil

 

Applications

Designed for use in a wide range of gear units with spur, bevel or helical gear design, including synchronized manual gearboxes, transmissions and axles under moderately severe load and pressure conditions.
It is applicable equally for passenger cars, light and heavy trucks, agricultural and building machinery, even for topping up well run-in hypoid transmission units.

 

Main Benefits

  • High safety margin against foaming and corrosion.
  • Reasonable viscosity/temperature and cold flow properties;
  • Compatible with all seal and metal types Offers effective protection of gear transmissions prolonging component life

 

Specifications

The Energear EP range meet the requirements of
API GL-4.
The 80W-90 grade also meets ZF TE
ML 02A,16A and 17A

Discover More +
BP Energear Hypo 80W-90 - Extreme-Pressure Automotive Multigrade Gear Oil

BP Energear Hypo 80W-90 - Extreme-Pressure Automotive Multigrade Gear Oil

 

Applications

Energear Hypo are designed for use in hypoid, bevel and spiral gear units, axles and final drives operating under severe conditions and over a wide spectrum of operating temperatures.
Through their multigrade viscosity characteristics, they meet the requirements of several automotive manufacturers for cars, vans and commercial trucks or buses.
For synchronized manual gearboxes, they should be used only if lubricants of API GL-5 performance level are explicitly recommended for such units.

 

Main Benefits

• Superior viscosity / temperature characteristics offering excellent cold flow properties and enhanced thermal stability.
• Excellent resistance to foaming and corrosion.
• Formulated from high quality base oils and employing sulphur / phosphorous EP additive technology.
• Compatible with the conventional seal materials used with mineral oils.
• Provides effective wear protection even under severe load conditions ensuring longer component life and allowing it to be used in the final drives of most vehicles in a wide range of operating temperatures.

 

Specifications

• API GL-5
• ZF TE-ML 05A,07A,12A,16B,17B (SAE 80W-90)
• ZF TE-ML 05A,07A,12A,16D,17B (SAE 85W-140)

Discover More +
BP Energear SHX-M 75W-90 - Synthetic Gear and Axle Oil

BP Energear SHX-M 75W-90 - Synthetic Gear and Axle Oil

 

 

Applications

Energear SHX-M is a fully synthetic, multi –purpose heavy duty automotive gear lubricant for use in complete driveline applications requiring either API GL-4 or GL-5 performance.
Careful selection of special high performance additives and synthetic base fluid technology gives Energear SHX -M exceptional low temperature fluidity whilst maintaining the compatibility and 'shiftability' requirements of most European synchromesh gear boxes.
It also provides the relatively high viscosity and load carrying characteristics necessary for heavy duty drive axles and transfercases.
It is fully compatible with conventional mineral oil based products, but its superior oxidative/thermal stability gives the potential for extended drain.
As an SAE 75W-90 grade, its low temperature flow properties deliver fuel economy benefits while its viscosity/temperature characteristics are suitable for year round use.
Energear SHX-M is recommended for service fill and top-up of commercial vehicle, construction equipment and passenger car manual transmissions, transfer cases and drive axles in DAF, Scania, Volvo, Eaton, Iveco and RVI equipment.

 

Main Benefits

• Improved fuel economy compared with conventional SAE 90 gear oils.
• Complete driveline lubrication enabling reduced product inventories.
• Easier operation of the transmissions provided by excellent low temperature fluidity giving improved gear changing from cold (compared to conventional SAE 80W & 90 grades.)
• Excellent wear protection even in the most severe applications allowing for prolonged component life and extended drain capability.
• Complete compatibility with conventional mineral oil based gear lubricants and with seals / materials used in automotive applications allows this to be used in a large number of applications.

 

Specifications

• GL-1, 2, 3, 4, 5 and MT-1
• MAN 3343 SL
• Scania STO:1
• ZF TE-ML 02B,05B,07A,12B,16F,17B
• MIL -PRF-2105E (SAE J2360)
• Eaton 300,000 km Drain

Discover More +
BP Energol GR-XP 150 - Premium Industrial Gear Oil

BP Energol GR-XP 150 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
BP Energol GR-XP 100 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 100 - Industrial Extreme Pressure Gear Oil

 

Description

The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
BP Energol GR-XP 460 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 460 - Industrial Extreme Pressure Gear Oil

 

Description
The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving
demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
BP Energol GR-XP 680 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 680 - Industrial Extreme Pressure Gear Oil

 

Description
The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving
demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
BP Vanellus Monograde 10W - Monograde diesel engine oil

BP Vanellus Monograde 10W - Monograde diesel engine oil

 

Applications
Vanellus Monograde 10W is designed for use in a wide range of applications that require a monograde oil
It is suitable for use in diesel and gasoline engines as well as certain transmission, hydraulic and other applications that specify a monograde engine oil.

 

Features / Benefits

  • Complete shear stability for “stay-in-grade” performance – equipment stays protected throughout its oil drain protection from wear and deposits – equipment is reliable and maintenance costs are reduced
  • Versatility – suitable for use in various applications

 

Specifications / Performance
Vanellus Monograde meets the following specifications

  • API CF/SG

Can be used for Caterpillar Transmissions requiring a T0-2 specification product

Discover More +