Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Viscosity...

Turbine Oils

Castrol Perfecto XEP 32 - Turbine Lubricant - 2107

Castrol Perfecto XEP 32 - Turbine Lubricant - 2107

 

Castrol Perfecto™ XEP turbine lubricants are based upon premium quality mineral oils enhanced with rust and oxidation inhibitiors to give maximum protection at high temperatures. They also contain antiwear additives to give additional load carrying properties

The Perfecto XEP range is recommended for industrial gas turbines where the lubricant is likely to be exposed to very high localised temperatures. Perfecto XEP lubricants possess superior air release performance, good resistance to foaming and excellent water separation properties. They are also suitable for the lubrication of steam turbines and Combined Cycle generating systems where the steam and gas turbines share a common oil supply. Perfecto XEP lubricants contain a load carrying additive and can be used in geared turbines with a common oil reservoir. They are fully compatible with nitrile, silicone and fluropolymer seal materials.

 

Perfecto XEP meets the requirements of:

  • British Standard BS 489 DIN 51515-1 and -2
  • General Electric GEK 32568F, 101941 and 107395A (ISO 32)
  • Alstom HTDG 90 117 (formerly ABB) (ISO 32 and 46)
  • Siemens TLV 9013 04 and 05 (ISO 32 and 46)

 

Advantages

  • Superior resistance to oxidation & thermal degradation provides a very long life lubricant because of low deposit / lacquer formation.

  • Antiwear properties including FZG 9 rating under A8.3/90 test conditions means it’s suitable for geared turbine applications and for a wide range of other applications (e.g. pumps, motors, compressors, hydraulics, and turbocouplings) thereby rationalising the lubricants required on site.

  • Suitable for the lubrication of both gas and steam turbines makes it suitable for combined cycle generating stations.

  • Superior air release properties means it meets the requirements of all turbine manufacturers.

  • Excellent water separation and corrosion inhibition means reduced down time through prolonged lubricant life and increased equipment reliability

 

Pack sizes available - 208ltr barrels

Discover More +
Castrol Perfecto T 32 - Turbine Lubricants - 2104

Castrol Perfecto T 32 - Turbine Lubricants - 2104

 

Castrol Perfecto T turbine oils are based on highly refined mineral oils, with selective additives to improve their inherent high oxidation stability and to protect against corrosion of ferrous and non-ferrous metals.

 

Application

Castrol Perfecto T oils are primarily intended for the lubrication of steam turbines, base oils used being selected to give the requisite water separation characteristics, resistance to foaming and the good air entrainment properties essential for this demanding application. Castrol Perfecto T turbine oils are also suitable for water turbines, the power turbines of generating sets based on aero-derived gas turbines and for many Industrial gas turbines. Castrol Perfecto T grades have been well proven in all of these applications, together with many other Industrial applications where a high quality lubricating oil is required.
Castrol Perfecto T grades comply with or exceed the following standards & specifications: British Standard BS 489 : 1983, National Power, PowerGen Deutch Industrie Normen DIN 51515, Nuclear Electric 207001. They are further approved by or meet the specifications of all major steam turbine manufacturers.

 

Advantages:

  • Excellent thermal stability
  • Long oil life
  • Stable in aggressive environments, heat, air, moisture and metal catalyst, all contribute to oil degradation.

 

Pack sizes available - 20ltr, 208ltr drums, 1000ltr IBC, Bulk delivery

Discover More +
Castrol Perfecto SN 46 - Synthetic gas turbine lubricant - 2105

Castrol Perfecto SN 46 - Synthetic gas turbine lubricant - 2105

 

Perfecto™ SN 46 is a synthetic hydrocarbon based lubricant which has been developed for the lubrication of industrial gas turbines, gas compressors and other items of rotating equipment where high temperatures are encountered or where the critical nature of the plant demands a premium lubricant to ensure long life and reliable operation with extended periods between shut-downs. Perfecto SN 46 has a very high degree of both thermal and oxidative stability which combine to ensure that the lubricating oil system is maintained free from lacquers and deposits especially in the key areas of turbine bearings and scavenge lines, gearboxes (where a high degree of aeration can give rise to oxidation even at moderate temperatures), gas compressor seals and fuel or governor control valves.

 

Application

Perfecto SN 46 is designed for use as a gas turbine lubricant. Its major advantages over mineral oils are particularly demonstrated in its ability to protect equipment during extreme cold weather starting, extended high temperature operation, and where the unit is subject to severe heat soaking after shutdown. Other notable features are excellent wear and rust protection, controlled rubber swell and prevention of sludge or deposit formation.

Perfecto SN 46 is compatible with other synthesised hydrocarbon fluids and with mineral oils. It is not compatible with synthetic ester gas turbine lubricants or with phosphate ester hydraulic control fluids.

 

Advantages:

  • High resistance to oxidation and additional load carrying performance for geared turbines
  • Highly stable formulation ensures a long oil life and minimises the risk of sludging or lacquering even in areas exposed to high temperatures, severe aeration and low oil flow. This prevents the premature failure of critical components such as servo valves which are the susceptible parts of the lubricating oil system. This stability maximises the availability of equipment and minimises maintenance activities during shutdown periods.

 

Meets the requirements of:
BS 489:1989, DIN 51515 Part 2,
Alstom HTDG 90117,
General Electric GEK 28143A, GEK 32568G, GEK 101941A,
Siemens MAT 812106, Siemens TLV 9013 04 and 05,
Solar ES 9-224U and
MAN Turbo SP10000494596.

 

Pack sizes available - 1000ltr IBC

Discover More +
Castrol Perfecto T 46 - Turbine Lubricants - 2108

Castrol Perfecto T 46 - Turbine Lubricants - 2108

 

Castrol Perfecto T turbine oils are based on highly refined mineral oils, with selective additives to improve their inherent high oxidation stability and to protect against corrosion of ferrous and non-ferrous metals.

 

Application

Castrol Perfecto T oils are primarily intended for the lubrication of steam turbines, base oils used being selected to give the requisite water separation characteristics, resistance to foaming and the good air entrainment properties essential for this demanding application. Castrol Perfecto T turbine oils are also suitable for water turbines, the power turbines of generating sets based on aero-derived gas turbines and for many Industrial gas turbines. Castrol Perfecto T grades have been well proven in all of these applications, together with many other Industrial applications where a high quality lubricating oil is required.

 

Advantages:

  • Excellent thermal stability
  • Long oil life
  • Stable in aggressive environments, heat, air, moisture and metal catalyst, all contribute to oil degradation

 

Castrol Perfecto T grades comply with or exceed the following standards & specifications: British Standard BS 489 : 1983, National Power, PowerGen Deutch Industrie Normen DIN 51515, Nuclear Electric 207001 They are further approved by or meet the specifications of all major steam turbine manufacturers.

 

Pack sizes available - 20ltr, 208ltr, 1000ltr IBC, bulk delivery

Discover More +
Castrol Perfecto T 68 - Turbine Lubricants - 2111

Castrol Perfecto T 68 - Turbine Lubricants - 2111

 

Castrol Perfecto T turbine oils are based on highly refined mineral oils, with selective additives to improve their inherent high oxidation stability and to protect against corrosion of ferrous and non-ferrous metals.

 

Application

Castrol Perfecto T oils are primarily intended for the lubrication of steam turbines, base oils used being selected to give the requisite water separation characteristics, resistance to foaming and the good air entrainment properties essential for this demanding application. Castrol Perfecto T turbine oils are also suitable for water turbines, the power turbines of generating sets based on aero-derived gas turbines and for many Industrial gas turbines. Castrol Perfecto T grades have been well proven in all of these applications, together with many other Industrial applications where a high quality lubricating oil is required.

 

Advantages:

  • Excellent thermal stability
  • Long oil life
  • Stable in aggressive environments, heat, air, moisture and metal catalyst, all contribute to oil degradation

 

Castrol Perfecto T grades comply with or exceed the following standards & specifications: British Standard BS 489 : 1983, National Power, PowerGen Deutch Industrie Normen DIN 51515, Nuclear Electric 207001 They are further approved by or meet the specifications of all major steam turbine manufacturers.

 

Pack sizes available - 20ltr, 208ltr drums, 1000ltr IBC, bulk delivery

Discover More +
Castrol Perfecto T 100 - Turbine Lubricants - 2112

Castrol Perfecto T 100 - Turbine Lubricants - 2112

 

Castrol Perfecto T turbine oils are based on highly refined mineral oils, with selective additives to improve their inherent high oxidation stability and to protect against corrosion of ferrous and non-ferrous metals.

 

Application

Castrol Perfecto T oils are primarily intended for the lubrication of steam turbines, base oils used being selected to give the requisite water separation characteristics, resistance to foaming and the good air entrainment properties essential for this demanding application. Castrol Perfecto T turbine oils are also suitable for water turbines, the power turbines of generating sets based on aero-derived gas turbines and for many Industrial gas turbines. Castrol Perfecto T grades have been well proven in all of these applications, together with many other Industrial applications where a high quality lubricating oil is required.

 

Advantages:

  • Excellent thermal stability
  • Long oil life
  • Stable in aggressive environments, heat, air, moisture and metal catalyst, all contribute to oil degradation

 

Castrol Perfecto T grades comply with or exceed the following standards & specifications: British Standard BS 489 : 1983, National Power, PowerGen Deutch Industrie Normen DIN 51515, Nuclear Electric 207001 They are further approved by or meet the specifications of all major steam turbine manufacturers.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Castrol Perfecto XEP 46 - Premium Antiwear Turbine Lubricant - 2117

Castrol Perfecto XEP 46 - Premium Antiwear Turbine Lubricant - 2117

 

The Castrol Perfecto™ XEP turbine lubricants are based upon premium quality mineral oils enhanced with rust and oxidation inhibitiors to give maximum protection at high temperatures. They also contain antiwear additives to give additional load carrying properties.

 

Application

The Perfecto XEP range is recommended for industrial gas turbines where the lubricant is likely to be exposed to very high localised temperatures. Perfecto XEP lubricants possess superior air release performance, good resistance to foaming and excellent water separation properties. They are also suitable for the lubrication of steam turbines and Combined Cycle generating systems where the steam and gas turbines share a common oil supply. Perfecto XEP lubricants contain a load carrying additive and can be used in geared turbines with a common oil reservoir. They are fully compatible with nitrile, silicone and fluropolymer seal materials.

 

Advantages:

  • Superior resistance to oxidation & thermal degradation provides a very long life lubricant because of low deposit / lacquer formation.
  • Antiwear properties including FZG 9 rating under A8.3/90 test conditions means it’s suitable for geared turbine applications and for a wide range of other applications (e.g. pumps, motors, compressors, hydraulics, and turbocouplings) thereby rationalising the lubricants required on site.
  • Suitable for the lubrication of both gas and steam turbines makes it suitable for combined cycle generating stations.
  • Superior air release properties means it meets the requirements of all turbine manufacturers.
  • Excellent water separation and corrosion inhibition means reduced down time through prolonged lubricant life and increased equipment reliability.

 

Perfecto XEP meets the requirements of:
British Standard BS 489 DIN 51515-1 and -2
General Electric GEK 32568F, 101941 and 107395A (ISO 32)
Alstom HTDG 90 117 (formerly ABB) (ISO 32 and 46)
Siemens TLV 9013 04 and 05 (ISO 32 and 46)

 

Pack sizes available - 208ltr drums, bulk delivery

Discover More +
Castrol Perfecto X 46 - Premium turbine lubricant - 2118

Castrol Perfecto X 46 - Premium turbine lubricant - 2118

 

The Castrol Perfecto™ X turbine oil range of lubricants is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.

 

Application

Castrol Perfecto X grades are recommended for industrial gas turbines where the lubricant is likely to be exposed to very high localised temperatures. They are also suitable for the lubrication of steam turbines and Combined Cycle generating systems where the steam and gas turbines share a common supply. Castrol Perfecto X grades possess superior air release performance, good resistance to foaming and excellent water separation properties. The Castrol Perfecto X range is fully compatible with nitrile, silicone and fluoropolymer seal materials.

 

Advantages:

  • Superior resistance to oxidation and thermal degradation provides a very long life lubricant because of low deposit/lacquer formation.
  • Superior air release properties mean they meet the requirements of all turbine manufacturers.
  • Excellent water separation and corrosion inhibition mean reduced down time through prolonged lubricant life and increased equipment reliability.
  • Suitable for the lubrication of both gas and steam turbines makes them suitable for Combined Cycle generating stations.

 

The Castrol Perfecto X grades meet the requirements of, or are approved against, the following specifications:
British Standard BS 489
DIN 51515 -1 and -2
GEK 32568g and GEK 107395A (ISO 32)
Alstom HTDG 90 117 (formerly ABB)
Siemens TLV 9013 04 and 05

 

Pack sizes available - 208ltr drums, 1000ltr IBC, bulk delivery

Discover More +
Castrol Perfecto X 32 - Premium turbine lubricant - 2119

Castrol Perfecto X 32 - Premium turbine lubricant - 2119

 

The Castrol Perfecto™ X turbine oil range of lubricants is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.

 

Application

Castrol Perfecto X grades are recommended for industrial gas turbines where the lubricant is likely to be exposed to very high localised temperatures. They are also suitable for the lubrication of steam turbines and Combined Cycle generating systems where the steam and gas turbines share a common supply. Castrol Perfecto X grades possess superior air release performance, good resistance to foaming and excellent water
separation properties. The Castrol Perfecto X range is fully compatible with nitrile, silicone and fluoropolymer seal materials.

 

Advantages:

  • Superior resistance to oxidation and thermal degradation provides a very long life lubricant because of low deposit/lacquer formation.
  • Superior air release properties mean they meet the requirements of all turbine manufacturers.
  • Excellent water separation and corrosion inhibition mean reduced down time through prolonged lubricant life and increased equipment reliability.
  • Suitable for the lubrication of both gas and steam turbines makes them suitable for Combined Cycle generating stations.

 

The Castrol Perfecto X grades meet the requirements of, or are approved against, the following specifications:
British Standard BS 489
DIN 51515 -1 and -2
GEK 32568g and GEK 107395A (ISO 32)
Alstom HTDG 90 117 (formerly ABB)
Siemens TLV 9013 04 and 05

 

Pack sizes available - 208ltr drums, bulk delivery

Discover More +
Castrol Perfecto HPT 32 - Gas turbine lubricant - 2120

Castrol Perfecto HPT 32 - Gas turbine lubricant - 2120

 

Castrol Perfecto HPT 32 is based upon highly refined mineral oils, selected for their inherent high oxidation stability and resistance to sludge formation, further reinforced by oxidation inhibitors chosen to give maximum protection at high temperatures. This high oxidation stability ensures long oil life and minimises deposit formation and lacquering within the turbine lubrication system.

 

Application

Castrol Perfecto HPT 32 is a high performance turbine oil, specifically developed for Industrial gas turbines where the lubricant is likely to be exposed to very high local temperatures. Castrol Perfecto HPT 32 also possesses the good water and air separation properties and resistance to foaming which is required for the lubrication of steam turbines, making it the preferred choice for Combined Cycle generating systems where the steam and gas turbines share a common oil supply.

 

Advantages:

  • Excellent thermal stability leads to long oil life
  • Suitable for the lubrication of steam as well as gas turbines, allowing the use of one oil for Combined Cycle generating systems
  • Compatible with all paints, seals and metals commonly used in turbine lubrication systems ensuring that there is no need to change seals or components when changing to this oil

 

Castrol Perfecto HPT 32 complies with or exceeds the following standards and specifications:
British Standard BS 489
Deutsch Industrie Normen DIN 51515
Alstom HTGD 90117
General Electric GEK 32568G
Siemens TLV 9013 04
Siemens Westinghouse 55125Z3

 

Pack sizes available - 208ltr drums, bulk delivery

Discover More +