Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Brand...

Slideway Oils

Total Drosera MS 150 - Machine Tool Oils - 110548

Total Drosera MS 150 - Machine Tool Oils - 110548

 

High performance multifunctional zinc free oils for machine tools.

 

Applications:

  • Machine tool slide ways under all conditions of speed and load (grades 68 to 320).
  • Hydraulic circuits for hydraulic pumps and motors (grades 32 and 46).
  • Gear boxes and feed mechanisms of all types with or without wet electro magnetic clutches (grades 68 to 320).
  • High speed machine spindles (grades 5, 10, 15 and 22 ) and very high speed (grade 2).
  • Hydrodynamic lubrication of mill roll stands during grinding (VG 460).
  • Particularly suitable for centralized lubrication systems.
  • One single comprehensive range of lubricating products for all parts of machine tools (hydraulics, slides, gears).
  • Simplification of storage and maintenance, cost reduction.
  • Viscosity grades 68 to 150 are also well suited to cold heading applications.

 

Specifications:

  • ISO 6743/2 : FD2 ; FD5 ; FD10 ; FD 22 ; FD 32
  • ISO 6743/4 : HG32 ; HG46
  • ISO 6743/13 : GA68 ; GA100 ; GA150 ; GA220 ; GA320 ; GA 460
  • DIN 51502 : CGLP46 ; CGLP68 ; CGLP100 ; CGLP150 ; CGLP220 ; CGLP320 ; CGLP 460
  • DIN51517 Part 3 , CLP 46 ; CLP 68 ; CLP 100 ; CLP 150 ; CLP 220 ; CLP 320 ; CLP 460
  • CINCINNATI MACHINE : P65-P62-P47-P50-P53-P45.

 

Advantages:

  • Excellent extreme-pressure properties
  • Excellent anti-stick-slip properties.
  • Strong stickiness grades 68 to 320.
  • Very low coefficient of friction.
  • Antioilmist properties.
  • High viscosity index.
  • Total compatibility with seals.
  • Low pour point.
  • Very good foaming resistance.
  • Very good oxidation resistance
  • Very good protection against rust
  • Very good anti-wear properties.
  • Good filterability.

 

Pack sizes available - 20L, 208L drums

Discover More +
Castrol Magnaglide D 150 - Machine tool slideway oils - 6270

Castrol Magnaglide D 150 - Machine tool slideway oils - 6270

 

Mineral oil based slideway with excellent stick-slip and compatibility with water based metalworking fluids. Castrol Magnaglide™ D is specially formulated for the lubrication of slideways on machine tools. These oils are fortified with selected oiliness, extreme pressure additives and a special material to impart tackiness and adhesiveness. Magnaglide D lubricants are noted for their usual ability to overcome the stick-slip motion ordinarily associated with slow moving tool parts. They reduce machine tool carriage chatter and possess the necessary adhesive characteristics to prevent squeezing out of the lubricant.

 

Application

Magnaglide D can be used on all horizontal and vertical slideways where a high quality demulsifying lubricant is required for slideway protection and to maximize coolant life; the outstanding frictional characteristics of the products prevents stick-slip, improving surface finish and tolerances of machined components and reducing rejection rates. Maganaglide D meets the exacting demands in the following applications; planers, grinders, horizontal boring machines, shapers, jig borers, and milling machines. Magnaglide D 32 can be used as a combined hydraulic and slideway oil.

The Magnaglide D range meets the requirements of:
• Cincinnati Lamb (Milacron) P-47, P-50 and P-53 (depending on viscosity grade)
• DIN 51502 – CGLP
• DIN 51524 Part II (July 2004) – including ISO 13357-1/-2 filtration test
• Suitable for Müller Weingarten equipment as hydraulic oil

 

Pack size available - 20L

Discover More +
Houghton Sta-Put G 150 - Slideway Lubricant - gf/12498

Houghton Sta-Put G 150 - Slideway Lubricant - gf/12498

 

Sta-Put G Slideway Lubricants are high film strength lubricants comprising high load carrying anti stick-slip additives in premium quality base oils.

They are designed expressly for use where sliding motion takes place at high load and low speed and where absolute freedom from sticking or chattering of ways or slides is a necessity.

 

Applications:

Ways and slides of grinders, planers, milling machines, shapers, lathes and other machine tools.

 

Advantages:

  • Longer plant / equipment life, with fewer failures.
  • Lower spend on maintenance and repairs.
  • Increased plant availability.
  • Reduced energy consumption.
  • Increased productivity.
  • Improved machining accuracy.
  • Better finished component quality.

 

Pack sizes available - 185kg barrels, 20kg drums, 850kg IBC's

Discover More +