Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Viscosity...

Slideway Oils

Castrol Molub-Alloy MWO 50 A LP - High-performance Slideway oil - 4305

Castrol Molub-Alloy MWO 50 A LP - High-performance Slideway oil - 4305

 

Castrol Molub-Alloy™ MWO 50 A LP Lubricant is a high performance slide and way lubricant. It was developed specifically to lubricate the rails of travelling pallets and the ways of work stations in automatic transfer machines used in high precision, high volume manufacturing.

Automatic transfer machines have been widely adopted by the automotive industry for machining automatic transmission housings and similar components. Demands for increased production have led to the design of higher and higher speed automatic transfer machines. Increased operating speeds have also spawned new metal cutting fluids and coolants which are highly surface active to enable an increase in the speed of tool wetting and the removal of heat. The surfactant additives used in these modern coolants have a detergent and cleansing action on oil and can rapidly displace lubricants used to protect the pallet guide rails and the ways at work stations. The special formulation of Molub-Alloy MWO 50 A LP lubricant resists the cleansing action of surface-active coolants so that wear on the rails and way is minimized and pallet motion is smooth and accurate.

Molub-Alloy MWO 50 A LP lubricant delivers positive lubrication to control wear and promote machining accuracy without excessive re-application or high lubricant consumption. The base oils used to blend MWO 50 A LP lubricant are high quality and selected for their ability to sustain a lubricating film despite sudden changes in load or shearing forces. The formulation includes selected polymer additives for both adhesive and cohesive characteristics. A select blend of Molub-Alloy lubricating solids is uniformly dispersed throughout the oil in a very stable suspension. Under extreme operating conditions, the lubricating solids provide lubrication even when the film is reduced to minimum thickness or where boundary conditions prevail. The value of the lubricating solids is reflected in the antiwear performance of this product. A carefully balanced treat rate of rust and oxidation inhibitors offers maximum rust protection for parts and long service life from the oil. Molub-Alloy MWO 50 A LP Lubricant is not corrosive to ferrous or nonferrous metals.

 

Application

Molub-Alloy MWO 50 A LP lubricant was developed primarily to lubricate the pallet guide rails and guide-ways at work stations of automatic transfer machines.

 

Advantages:

  • Effectively controls stick-slip and is ideally suited for the lubrication of sliding way tables of most machine tools.
  • Highly resistant to the water wash-off - can be used as an effective chain lubricant in car wash lines, wire ropes and other applications exposed to water spray containing detergents.

 

Pack sizes available - 45 US Lb drum

Discover More +
Castrol Carelube SL 220 - Biodegradable Ester Based Slideway Lubricant - 6055

Castrol Carelube SL 220 - Biodegradable Ester Based Slideway Lubricant - 6055

 

Castrol Carelube™ SL range is available in ISO 68 and 220 viscosity grades. It is specifically designed for use in machine tool slideway systems.

Available in 208L drums / bulk delivery.

 

Application

Castrol Carelube SL range should be used in place of conventional mineral slideway oils to ensure optimum performance when used in conjunction with the CARECUT neat cutting range. It is especially important with machine slideway systems as the majority of machine tools employ total loss technology. Carelube SL 68 may also be used for machine tool hydraulic systems where ester based soluble cutting fluids are being utilised and minimisation of impact of contamination is required.

 

Advantages

  • Inherently biodegradable
  • Environmentally friendly
  • Excellent stick slip performance
  • Compatible with ester based neat cutting oils
  • Compatible with certain ester based soluble oils
Discover More +
Castrol Magna GC 32 - Machine tool Slideway oil - 6209

Castrol Magna GC 32 - Machine tool Slideway oil - 6209

 

Magna Slideway oils incorporate tackiness and lubricity additives for good stick slip and load carrying performance. BD 68 meets Cincinnati Lamb P-47 and CF 220 meets P-50.

ISO Viscosity and pack sizes available:
Castrol MAGNA GC 32 - 20L & 208L

 

DESCRIPTION
Castrol Magna™ GC 32, BD 68 and CF 220 are specially formulated slideway lubricants to provide all-round performance with good stick-slip and load carrying performance. They combine controlled frictional characteristics with high film-strength and high load carrying properties to eliminate 'stick-slip'.

 

APPLICATION
Magna GC 32 is a light viscosity, combined hydraulic and slideway lubricant. Applications include lightly loaded slideways such as found on small centre lathes and combined hydraulic and slideway systems such as in reciprocating grinding machines.
Magna BD 68 is a medium viscosity slideway lubricant suitable for use in most machine tool lubrication systems specifying an ISO VG 68 oil. It meets Cincinnati Milacron P47 specification.
Magna CF 220 is formulated for use with heavily loaded slideway applications or where there is a vertical or inclined slideway. It meets Cincinnati Milacron P50 specification.

Discover More +
Castrol Magna BD 68 - Machine tool Slideway oil - 6240

Castrol Magna BD 68 - Machine tool Slideway oil - 6240

 

Magna Slideway oils incorporate tackiness and lubricity additives for good stick slip and load carrying performance. BD 68 meets Cincinnati Lamb P-47 and CF 220 meets P-50.

ISO Viscosity and pack sizes available:
Castrol MAGNA BD 68 - 4x5L, 20L, 208L, 1000L IBC & Bulk delivery

 

DESCRIPTION
Castrol Magna™ GC 32, BD 68 and CF 220 are specially formulated slideway lubricants to provide all-round performance with good stick-slip and load carrying performance. They combine controlled frictional characteristics with high film-strength and high load carrying properties to eliminate 'stick-slip'.

 

APPLICATION
Magna GC 32 is a light viscosity, combined hydraulic and slideway lubricant. Applications include lightly loaded slideways such as found on small centre lathes and combined hydraulic and slideway systems such as in reciprocating grinding machines.
Magna BD 68 is a medium viscosity slideway lubricant suitable for use in most machine tool lubrication systems specifying an ISO VG 68 oil. It meets Cincinnati Milacron P47 specification.
Magna CF 220 is formulated for use with heavily loaded slideway applications or where there is a vertical or inclined slideway. It meets Cincinnati Milacron P50 specification.

Discover More +
Castrol Magna CF 220 - Machine tool Slideway oil - 6242

Castrol Magna CF 220 - Machine tool Slideway oil - 6242

 

Magna Slideway oils incorporate tackiness and lubricity additives for good stick slip and load carrying performance. BD 68 meets Cincinnati Lamb P-47 and CF 220 meets P-50.

ISO Viscosity and pack sizes available:
Castrol MAGNA CF 220 - 20L & 208L

 

DESCRIPTION
Castrol Magna™ GC 32, BD 68 and CF 220 are specially formulated slideway lubricants to provide all-round performance with good stick-slip and load carrying performance. They combine controlled frictional characteristics with high film-strength and high load carrying properties to eliminate 'stick-slip'.

 

APPLICATION
Magna GC 32 is a light viscosity, combined hydraulic and slideway lubricant. Applications include lightly loaded slideways such as found on small centre lathes and combined hydraulic and slideway systems such as in reciprocating grinding machines.
Magna BD 68 is a medium viscosity slideway lubricant suitable for use in most machine tool lubrication systems specifying an ISO VG 68 oil. It meets Cincinnati Milacron P47 specification.
Magna CF 220 is formulated for use with heavily loaded slideway applications or where there is a vertical or inclined slideway. It meets Cincinnati Milacron P50 specification.

Discover More +
Castrol Magnaglide D 150 - Machine tool slideway oils - 6270

Castrol Magnaglide D 150 - Machine tool slideway oils - 6270

 

Mineral oil based slideway with excellent stick-slip and compatibility with water based metalworking fluids. Castrol Magnaglide™ D is specially formulated for the lubrication of slideways on machine tools. These oils are fortified with selected oiliness, extreme pressure additives and a special material to impart tackiness and adhesiveness. Magnaglide D lubricants are noted for their usual ability to overcome the stick-slip motion ordinarily associated with slow moving tool parts. They reduce machine tool carriage chatter and possess the necessary adhesive characteristics to prevent squeezing out of the lubricant.

 

Application

Magnaglide D can be used on all horizontal and vertical slideways where a high quality demulsifying lubricant is required for slideway protection and to maximize coolant life; the outstanding frictional characteristics of the products prevents stick-slip, improving surface finish and tolerances of machined components and reducing rejection rates. Maganaglide D meets the exacting demands in the following applications; planers, grinders, horizontal boring machines, shapers, jig borers, and milling machines. Magnaglide D 32 can be used as a combined hydraulic and slideway oil.

The Magnaglide D range meets the requirements of:
• Cincinnati Lamb (Milacron) P-47, P-50 and P-53 (depending on viscosity grade)
• DIN 51502 – CGLP
• DIN 51524 Part II (July 2004) – including ISO 13357-1/-2 filtration test
• Suitable for Müller Weingarten equipment as hydraulic oil

 

Pack size available - 20L

Discover More +
Castrol Magnaglide D 68 - Machine tool slideway oils - 6271

Castrol Magnaglide D 68 - Machine tool slideway oils - 6271

 

Mineral oil based slideway with excellent stick-slip and compatibility with water based metalworking fluids. Castrol Magnaglide™ D is specially formulated for the lubrication of slideways on machine tools. These oils are fortified with selected oiliness, extreme pressure additives and a special material to impart tackiness and adhesiveness. Magnaglide D lubricants are noted for their usual ability to overcome the stick-slip motion ordinarily associated with slow moving tool parts. They reduce machine tool carriage chatter and possess the necessary adhesive characteristics to prevent squeezing out of the lubricant.

 

Application

Magnaglide D can be used on all horizontal and vertical slideways where a high quality demulsifying lubricant is required for slideway protection and to maximize coolant life; the outstanding frictional characteristics of the products prevents stick-slip, improving surface finish and tolerances of machined components and reducing rejection rates. Maganaglide D meets the exacting demands in the following applications; planers, grinders, horizontal boring machines, shapers, jig borers, and milling machines. Magnaglide D 32 can be used as a combined hydraulic and slideway oil.

The Magnaglide D range meets the requirements of:
• Cincinnati Lamb (Milacron) P-47, P-50 and P-53 (depending on viscosity grade)
• DIN 51502 – CGLP
• DIN 51524 Part II (July 2004) – including ISO 13357-1/-2 filtration test
• Suitable for Müller Weingarten equipment as hydraulic oil

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Castrol Magnaglide D 220 - Machine tool slideway oils - 6272

Castrol Magnaglide D 220 - Machine tool slideway oils - 6272

 

Mineral oil based slideway with excellent stick-slip and compatibility with water based metalworking fluids. Castrol Magnaglide™ D is specially formulated for the lubrication of slideways on machine tools. These oils are fortified with selected oiliness, extreme pressure additives and a special material to impart tackiness and adhesiveness. Magnaglide D lubricants are noted for their usual ability to overcome the stick-slip motion ordinarily associated with slow moving tool parts. They reduce machine tool carriage chatter and possess the necessary adhesive characteristics to prevent squeezing out of the lubricant.

 

Application

Magnaglide D can be used on all horizontal and vertical slideways where a high quality demulsifying lubricant is required for slideway protection and to maximize coolant life; the outstanding frictional characteristics of the products prevents stick-slip, improving surface finish and tolerances of machined components and reducing rejection rates. Maganaglide D meets the exacting demands in the following applications; planers, grinders, horizontal boring machines, shapers, jig borers, and milling machines. Magnaglide D 32 can be used as a combined hydraulic and slideway oil.

The Magnaglide D range meets the requirements of:
• Cincinnati Lamb (Milacron) P-47, P-50 and P-53 (depending on viscosity grade)
• DIN 51502 – CGLP
• DIN 51524 Part II (July 2004) – including ISO 13357-1/-2 filtration test
• Suitable for Müller Weingarten equipment as hydraulic oil

 

Pack sizes available - 20L, 208L drums, Bulk delivery

Discover More +