Kernow Oils - Lubricant Solutions

Filter Your Results...

By Viscosity...
By Brand...

Neat Oils

Houghton Fenella Oil D 803 C - Neat Drawing Oil - 20104

Houghton Fenella Oil D 803 C - Neat Drawing Oil - 20104

 

Fenella Oil D 803 C is a special heavy duty oil for drawing, forming, stamping, blanking and profiling low and high alloyed or stainless steels.

 

Applications:

Fenella Oil D 803 C is based on specially refined mineral oil and contains a combination of chemically active and polar additives. The additives are selected to provide the oil with particularly high load-carrying properties. In this way long tool lives and excellent surfaces of the machined work pieces are achieved. Fenella Oil D 803 C is compatible with most yellow metals, but care should be taken to ensure compatibility before use. Fenella Oil D 803 C is used neat as supplied.

 

Advantages:

  • Excellent lubricity
  • Good skin compatibility
  • Long tool life

 

Pack sizes available - 209ltr drums

Discover More +
Houghton Fenella VD 201 N - Neat Volatile Drawing Oil - 20148

Houghton Fenella VD 201 N - Neat Volatile Drawing Oil - 20148

 

Fenella VD 201 N is a low viscosity stamping and drawing oil characterized by the absence of residual films after evaporation. The product is based on polar and anti-corrosion additives.

Fenella VD 201 N does not discolour yellow metals.

 

Application:

Fenella VD 201 N is an evaporative product for stamping and drawing of thin non-ferrous and ferrous materials.

The product does not leave a residual film or react with paint. Degreasing of parts before assembly or welding is not necessary.

 

Advantages:

  • Good lubricity
  • Chlorine free
  • Free of heavy metals (zinc free)
  • Aromatic free
  • Good evaporation
Discover More +
Houghton Houghto-Draw TD51 - Heavy duty metal forming lubricant - 20315

Houghton Houghto-Draw TD51 - Heavy duty metal forming lubricant - 20315

A modern range of non-sulphurised lubricants for heavy duty metal forming applications.

 

Houghto-Draw TD51 is a neat oil and contains a high proportion of additives based on chlorinated extreme pressure agents and special lubricity compounds. Houghto-Draw TD51 encompass the lubricity requirements of a wide spectrum of difficult forming operations. This product is suitable for use on carbon and stainless steel.

 

Application:

This product can be applied by pump, brush, swab or roller. This product contains a high level of extreme pressure agents and special lubricity compounds therefore it is capable of lubricating heavy duty forming operations. The product is used for general forming, deep drawing, blanking, piercing and cold heading operations.
Discover More +
Houghton Mouldlubric 114 - High Performance Cold Forming Lubricant - 20600

Houghton Mouldlubric 114 - High Performance Cold Forming Lubricant - 20600

 

Mouldlubric 114 is a neat oil product with high extreme pressure lubrication properties. The product uses combinations of sulphurised additives, chlorinated compounds, anti-wear agents and high quality esters to provide optimum performance in a wide range of cold forming applications.

 

Application:

A medium to low viscosity sulphur chlorinated product with an exceptional lubricity package to give optimum performance even under the most arduous conditions.
  • Deep drawing
  • Cold heading
  • Fine blanking
  • Stamping
  • Tube drawing
Discover More +
Houghton Mouldlubric 116 - High Performance Cold Forming Lubricant - 20625

Houghton Mouldlubric 116 - High Performance Cold Forming Lubricant - 20625

 

Mouldlubric 116 is a neat oil with high extreme pressure lubrication properties. The product uses combinations of surphurised additives, chlorinated compounds, anti-wear agents and high quality esters to provide optimum performance in a wide range of cold forming applications.

 

Applications:

Medium to low viscosity sulphur chlorinated products designed to give high performance across the range of cold heading applications.
  • Deep drawing
  • Cold heading
  • Fine blanking
  • Stamping
  • Tube drawing
Discover More +
Houghton Cindolube 2000 C1 - Emulsifiable metalforming lubricant - 20714

Houghton Cindolube 2000 C1 - Emulsifiable vegetable oil based metalforming lubricant - 20714

 

Cindolube 2000C1 is an emulsifiable metalforming lubricant based on renewable vegetable oil technology and is free from chlorine, sulphur, glycol ether and diethanolamine.

Cindolube 2000C1 is a high lubricity product based on polar additives giving excellent performance in a range of ferrous and non-ferrous stamping and blanking operations.

 

Application:

Cindolube 2000C1 can be used neat or diluted with water and can be applied by immersion, spray or roller. Best results can be obtained in water of less than 20°F total hardness.

Cindolube 2000C1 is used in a wide range of ferrous and non-ferrous forming operations but is particularly effective for aluminium fin forming on radiators and condensers used in vehicle climate control systems to replace conventional solvent based products.

Cindolube 2000 C1 is easily removed by use of alkaline cleaners. 

 

Advantages:

  • Chlorine, sulphur, diethanolamine and glycol ether free
  • Can be used neat or diluted with water
  • VOC-free
  • Based on renewable vegetable oil
  • Good rust preventive after forming
Discover More +
Houghton Houghto-Draw V2000 - Biodegradable Metal Forming Oil - 20724

Houghton Houghto-Draw V2000 - Biodegradable Metal Forming Oil - 20724

 

Houghto-Draw V2000 is a biodegradable metal forming oil based on renewable vegetable oil technology. The product is water extendable and can be used either neat or diluted with water to form a stable milky emulsion.

 

Applications:

Houghto-Draw V2000 is free from chlorinated and sulphurised additives and can be used on ferrous and nonferrous materials. The natural high lubricity makes the product suitable for arduous metal forming applications, including drawing of stainless steel sinks and automotive covers (neat) and stamping and pressing of a variety of materials and components (diluted).

 

Advantages:

  • Biodegradable vegetable technology
  • Can be used neat or diluted
  • Suitable for steels and non-ferrous materials
  • High lubricity for reduction of tears and splits
  • Reduces residues on dies
  • Chlorine and sulphur free
  • Pleasant to use

 

Pack sizes available - 205ltr drums

Discover More +
Houghton Tube Lubricant CR51H - High viscosity deep drawing oil - 25777

Houghton Tube Lubricant CR51H - High viscosity deep drawing oil - 25777

 

Tube Lubricant CR51H is one of a range of high lubricity oils for the cold reduction of steel tubes. They are viscous oils based upon extreme pressure additives and high lubricity agents.

 

Application:

Tube Lubricant CR51H can be used for difficult applications such as stainless steel tube expansions and reductions.

The internal lubrication of the mandrel as well as the external die lubrication can be effectively achieved using products from the Tube Lubricant CR range. The full range of the hardest steels, including stainless, nimonics and the more exotic alloys used in the aerospace and nuclear industries, will benefit from the use of these lubricants.

Tube Lubricant CR51H can be applied by pump, brush, swab or roller and is readily removed by normal solvent degreasing techniques. Hot alkali cleaners such as Houghto-Clean Plus 280 can also be used, particularly where pressure washing equipment is available.

To prevent risk of staining it recommended that lubricant is removed prior to annealing.

 

Advantages:

  • High lubricity for arduous forming applications
  • Especially suitable for cold tube reduction
  • Light coloured for good workpiece visibility
  • Prolongs die life
  • High viscosity for high film strength on most arduous draws
Discover More +
Houghton Macron 2425 S-14 - Neat grinding oil - 02836

Houghton Macron 2425 S-14 - Neat grinding oil - 02836

 

Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

 

Applications:

Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.

Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.

Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.

 

Advantages:

  • Increased productivity - Long tool life.
  • Increased productivity - High removal rates.
  • Reduced cost - Energy saving.
  • Secure handling - Univeral product.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC

Discover More +
Houghton Cindolube 3100 - Deformation Oil - gf/12359

Houghton Cindolube 3100 - Deformation Oil - gf/12359

 

CINDOLUBE 3100 is based on hydro treated mineral oil with low aromatic content. A combination of polar additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CINDOLUBE 3100 is free from Chlorine, Sulphur, Phosphorous and heavy metals (Zinc).

 

Applications:

CINDOLUBE 3100 can be used for drawing and blanking operation of yellow metals and aluminium alloys e.g. for electrical conductors.

CINDOLUBE 3100 is also used as neat cutting oil for fine machining operations.

 

Advantages:

  • Reduced cost - Higher production rates due to strong lubricity.
  • Reduced cost - Clean workshop environment due to less oil mist and evaporation.
  • Satisfied staff - Good EHS profile, reduced smell and oil mist.
  • Satisfied staff - Light color for good monitoring of the operation.

 

Pack sizes available - 175kg barrels, 20kg drums, 850kg IBC's

Discover More +