Kernow Oils - Lubricant Solutions

Filter Your Results...

By Viscosity...
By Brand...

Neat Oils

Houghton Cut-Max SE100 - EDM fluid - 08802

Houghton Cut-Max SE100 - High purity synthetic dielectric fluid for spark erosion - 08802

 

Cut-Max SE100 is a pink transparent, very low odour, low viscosity dielectric fluid. The high purity product minimises micro soldering and protects against electrode wear. The product is formulated with ultra high purity synthetic hydrocarbons to give a completely odourless product with excellent resistance to thermal degradation and improved skin compatibility for operators.

 

Applications:

Cut-Max SE100 is specialist fluid for EDM machining and is especially designed for superfine finishing operations. Main applications include machining of moulds for diecasting or plastic injection machines and in aerospace turbine blade production. Cut-Max SE100 is used for fine boring of aerofoil honeycombs in nickel alloys, e.g. Inconel 718. Cut-Max SE100 can be used on individual machines and in centralised systems. Cut-Max SE100 has Rolls Royce CSS 142 approval.

 

Advantages:

  • Very low odour and smoke-free for operator preference.
  • Safer to use than conventional paraffinic products.
  • Very low evaporation rate.
  • Efficient flushing of spark debris minimising micro-soldering.
  • Low viscosity for fine surface finish.
  • Suitable for all types of filtration including diatomeous earth.
  • Highly resistant to oxidation for long service life.
  • Protects electrodes against wear.

 

Available pack sizes: 205ltr

Discover More +
Houghton EDM 65 - EDM fluid - 08223

Houghton EDM 65 - Neat EDM Oil for Spark Erosion - 08223

 

Macron EDM 65 is based on paraffinic hydrocarbons. Its very low aromatic content improves working conditions. The product is colourless and has a very low odour. The high dielectric strength and good flushing properties contribute to a high stock removal capacity. Macron EDM 65 shows excellent chemical compatibility and a good filtration performance with usual filter media. Macron EDM 65 can be used with graphite and copper electrodes.

 

Applications:

Macron EDM 65 is a low viscosity oil for spark erosion, especially for fine finishing. The product also shows a good flushing performance in very small erosion slots. A surface roughness of 1 μm or lower is possible. Macron EDM 65 can also be used as low viscosity spindle oil e.g. for narrow fit spindles and as magnaflux inspection oil.

Macron EDM 65 is used neat as supplied.

 

Advantages:

  • Chlorine free.
  • Very low aromatic components.
  • Free of heavy metals.
  • High dielectric strength.
  • Very mild odour.

 

Available pack sizes: 1000ltr IBC & 209ltr

Discover More +
Total Martol EP 65 CF - Extreme pressure stamping oil - 115809

Total Martol EP 65 CF - Extreme pressure stamping oil - 115809

 

Applications:

  • Cutting, stamping, forming.
  • Spinning connecting shaft.
  • Steel wiredrawing.
  • Product is particularly suitable for stamping that must not come into contact with chlorinated products.
  • Allows stamping operations in several passes without regreasing.
  • Meet the automotive industry requirements.

 

Advantages:

  • Doped fluid mineral oil without any additive containing chlorine.
  • Excellent spreading of oil film.
  • This original formulation takes into account the need to improve working conditions and additional convenience for users.
  • Lubricity, anti-wear and extreme-pressure doping give improved tool edge retention and extremely good surface finish - factors which all contribute towards reducing production costs.
  • Good stamping capacity.
  • Removal: degrease using normal solvents and hot alkaline lyes.
  • We have formulated chlorine-free products in response to the need to protect the environment and the requirements of certain industries.
  • This oil offers performance completely comparable to that obtained using an equivalent chlorinated product that has the advantage of not causing pollution as well as less expensive disposal.
  • Very good anticorrosion properties.

 

Pack sizes available - 20L

Discover More +
Total Martol LVG 15 CF - Pressing oil evanescent fluid - 115850

Total Martol LVG 15 CF - Pressing oil evanescent fluid - 115850

 

Applications:

  • Fine pressing of aluminium.

 

Advantages:

  • Colourless mineral oil.
  • Excellent wettability on aluminium.
  • Odourless.
  • This original formulation takes into account the need to improve working conditions and additional convenience for users.
  • Lubricity, anti-wear and extreme-pressure doping give improved tool edge retention and extremely good surface finish - factors which all contribute towards reduced production costs.
  • We have formulated chlorine-free products in response to the need to protect the environment and the requirements of certain industries.
  • Residue < 0.05 % by mass after passage through stove at 200°C for two hours.
  • Does not leave marks on aluminium.
  • This oil offers performance completely comparable to that obtained using an equivalent chlorinated product that has the advantage of not causing pollution as well as less expensive disposal.
  • This oil contains selected petroleum bases and additives designed to guarantee:

                       - residue < 0.05 % by mass.

                       - excellent wettability on aluminium.

                       - no marks on aluminium during heat treatment of aluminium.

                       - product does not contain chlorine.

 

 

Pack sizes available - 208L drums

Discover More +
Total Martol LVG 25 CF - Metalworking - 115852

Total Martol LVG 25 CF - Metalworking - 115852

 

Applications:

  • MARTOL LVG 25 is an evaporating oil for low and medium severe drawing on steel and non-iron metals.
  • MARTOL LVG 25 can be applied with a brush by spraying or with a roller.

 

Advantages:

MARTOL LVG 25 CF is characterised by:

  • Its evaporating character.
  • A good wetability of the lubricant which assure an excellent surface covering.
  • Can be used in certain cases on coated metal.
  • Leaves a thin film and degreasing operation is most of the time unnecessary.

 

Pack sizes available - 208L drums

Discover More +
Total DIEL MS 7000 - Electro Discharge Machine Fluid - 115858

Total DIEL MS 7000 - Electro Discharge Machine Fluid - 115858

 

Applications:

Multifunctional fluid particularly suitable for semi finishing and finishing operations when the shapes are complex and with very accurate dimensions.

 

Specifications:

  • CHARMILLES TECHNOLOGIES (Switzerland)
  • ONA (Spain and France)
  • INGERSOLL (France)
  • INGERSOLL HANSEN (France)
  • AGIE (Switzerland and France)

 

Advantages:

  • Very clear fluid mineral oil.
  • Good resistance to oxidation.
  • High flash point.
  • This product was chosen for its very narrow petroleum cut (low volatility).
  • Very low aromatics content.
  • Low pour point, possibility of storage outside.

 

Pack sizes available - 208L drums

Discover More +
Total Martol EP 100 CF - Stamping oil - 167671

Total Martol EP 100 CF - Stamping oil - 167671

 

Applications:

  • Cutting, stamping, extrusion and drawing of low-to medium-carbon steels.
  • This product is particularly well-suited to materials that must not be in contact with chlorinated products.

 

Advantages:

  • Doped fluid mineral oil free of any chlorinated additives.
  • Excellent spreading of the oil film.
  • Good stamping and drawing capacity.
  • The originality of the formulation takes into account the improvement in the operative conditions thus ensuring additional comfort to users.
  • The oiliness, anti-wear and extreme-pressure dopings provide better tool resistance and a very good surface state, which elements contribute to a reduction in production costs.
  • Elimination: degreasing by the usual solvents and hot alkaline lyes.
  • The need to protect the environment together with the demand on the part of certain industries have led us to formulate chlorine-free products.
  • This oil achieves performances wholly comparable to those obtained with chlorinated products while at the same time offering the advantage of not causing pollution and of being able to be eliminated at least cost.

 

Pack sizes available - 208L drums

Discover More +
Total Valona MS 7023 - Chlorine-free neat cutting oil - 115757

Total Valona MS 7023 - Chlorine-free neat cutting oil for heavy duty machinings. - 115757

 

Applications:

  • Valona MS 7023 is a chlorine-free neat cutting oil dedicated to both ferrous and non-ferrous metals.
  • Valona MS 7023 is widely used on cutting operations on hard and very hard steels (bearing steels), on special, stainless and refractory steels (NIMONIC and Vaspalloy) and on titanium alloys (aviation and medical applications). It can also be used on low carbon steels and copper alloys.
  • Machinings lubricated : turning, screwcutting, milling, threading, tapping, sawing, deep drilling.

 

Advantages:

  • Very good antiwear and extreme pressure performances:

                 - increases the tool lifetime,
                 - prevents ridging,
                 - very good surface finish,
     (it contributes towards reducing production costs).

  • Very good behaviour on a large scale of cutting parameters.
  • Low treatment cost (swarf, diatomated earth, chip treatment).
  • Low mist oil formation which improves the work conditions.

 

Pack sizes available - 20ltr, 208ltr drums

Discover More +
Total Scilia MS 7046 - Chlorine-free neat cutting oil - 115779

Total Scilia MS 7046 - Chlorine-free neat cutting oil - 115779

 

Chlorine-free neat cutting oil for heavy duty machiningsand for machine tool lubrication.

 

Applications:

Scilia MS 7046 is a chlorine-free neat cutting oil dedicated to both ferrous and non-ferrous metals and to the lubrication of various machine parts: bearings, gears, sideways. Precautions to take on all lubrication machine circuits: it is mandatory to use new and fresh oil for topping up. Scilia MS 7046 is widely used on cutting operations on hard and very hard steels (bearing steels), on special, stainless and refractory steels (Nimonic and Vaspalloy) and on titanium alloys (aviation and medical applications). It can also be used on low carbon steels and copper alloys.
Machinings lubricated: turning, screwcutting, milling, horizontal broaching, threading, tapping.

 

Advantages:

  • Very good antiwear and extreme pressure performances:

                - increases the tool lifetime,
                - prevent ridging,
                - very good surface finish.
(contributes towards reducing production costs).

  • Avoids problems in case of lubrication oil leakages: Eliminates the risk of mixing and diluting the cutting oil with the oil from the crankcase.
  • Very good behaviour on a large scale of cutting parameters.
  • Low treatment cost (swarf, diatomated earth, chip treatment).
  • Low mist oil formation which improves the work conditions.

 

Pack sizes available - 208ltr drums

Discover More +