Kernow Oils - Lubricant Solutions

Filter Your Results...

By Viscosity...
By Brand...

Neat Oils

Houghton Tube Draw 506 - Tube and Wire Drawing Oil - gf/12478

Houghton Tube Draw 506 - Tube and Wire Drawing Oil - gf/12478

 

TUBE DRAW 506 is based on hydro treated mineral oil with low aromatic content. A combination of polar additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

TUBE DRAW 506 is free from Chlorine, Sulphur, Phosphorous and heavy metals (line).

 

Applications:

TUBE DRAW 506 is used for rough drawing of copper wire, for drawing of brass tubes on bench-draw, Bullblock or Spinner equipment.

TUBE DRAW 506 is also suitable for drawing of aluminium.

 

Advantages:

  • Reduced cost - higher production rates due to strong lubricity.
  • Reduced cost - clean workshop environment due to less oil mist and evaporation.
  • Satisfied staff - good EHS profile, reduced smell and oil mist.
  • Satisfied staff - good EHS profile, free from Chlorine and other suspect substances.

 

Pack sizes available - 190kg barrels, 20kg drums

Discover More +
Houghton Hydrodraw 625 - Water Based Polymers Dry Film Hydroforming Lubricant -

Houghton Hydrodraw 625 - Water Based Polymers Dry Film Hydroforming Lubricant - gf/12479

 

HYDRODRAW 625 is a water based cold deformation products containing special polymers. After evaporation of the water base a tough dry film is created on the sheet surface to facilitate metal flow in high pressure deformation applications.

HYDRODRAW 625 is free from Chlorine, Sulfur, Phosphorous and heavy metals.

 

Applications:

HYDRODRAW 625 is used as external hydroforming lubricant, for ram swaging and stretch forming. It is suitable for steel, stainless steel and aluminium.

HYDRODRAW 625 can be used in process or as pre- coating on tube or sheet stock.

 

Advantages:

  • Reduced cost - higher production rates due to strong lubricity.
  • Reduced cost - less energy consumption due to high EP and lubricity.
  • Satisfied staff - good EHS profile, reduced smell and oil mist.
  • Satisfied staff - good EHS profile, free from Chlorine and other suspect substances.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Hydrodraw 746 M - Neat Drawing and Hydroforming Oil - gf/12480

Houghton Hydrodraw 746 M - Neat Drawing and Hydroforming Oil - gf/12480

 

HYDRODRAW 746 M is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

HYDRODRAW 746 M is free from Chlorine and heavy metals (Zinc).

 

Applications:

HYDRODRAW 746 M is a special heavy duty oil for severe drawing operations and as outer lubricant in hydroforming processes.

HYDRODRAW 746 M can be used for high alloy steel as well as for aluminium alloys.

 

Advantages:

  • Reduced cost - improved tool life due to high EP power.
  • Reduced cost - less energy consumption due to high EP and lubricity.
  • Reduced cost - easy to be washed off with standard cleaners.
  • Reduced cost - higher production rates due to strong lubricity.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Cut-Max 1-03 FS - Neat Honing and Grinding Oil - gf/12501

Houghton Cut-Max 1-03 FS - Neat Honing and Grinding Oil - gf/12501

 

CUT-MAX 1-03 FS is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CUT -MAX 1-03 FS is chlorine free.

 

Applications:

CUT-MAX 1-03 FS is mainly used for honing of automotive gears. CUT-MAX 1-03 FS is suitable for both ceramic and CBN honing wheels.

 

Advantages:

  • Increased productivity - long tool life.
  • Reduced cost - long sump life.
  • Reduced cost - clean machines.

 

Pack sizes available - 160kg barrels, 20kg drums, 850kg IBC's

Discover More +
Houghton Cut-Max 225 - Neat Cutting Oil - gf/12502

Houghton Cut-Max 225 - Neat Cutting Oil - gf/12502

 

CUT-MAX 225 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CUT-MAX 225 is free from chlorine and active sulphur.

 

Applications:

CUT-MAX 225 is used mainly for turning application with swiss type or multi spindle turning lathes. It is also suitable for surface rolling operations.

CUT-MAX 225 allows the machining of yellow metals, aluminium, steel and stainless steel.

 

Advantages:

  • Increased productivity - long tool life.
  • Reduced cost - long sump life.
  • Secure handling - universal product.

 

Pack sizes available - 185kg barrels

Discover More +
Houghton Cut-Max AL-E - Neat Cutting Oil for Fine Machining - gf/12503

Houghton Cut-Max AL-E - Neat Cutting Oil for Fine Machining - gf/12503

 

CUT-MAX AL-E is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CUT-MAX AL-E is free of chlorine, sulphur, zinc and phosporous.

 

Applications:

CUT-MAX AL-E is used for fine machining of aluminium parts. The oils contains a special additive combination with high detergency for clean and bright surfaces.

CUT-MAX AL-E is equipped with emulsifiers to support the cleaning with water based cleaners.

 

Advantages:

  • Increased productivity - high removal rates.
  • Reduced cost - energy saving.
  • Secure handling - universal product.

 

Pack sizes available - 200kg barrels

Discover More +
Houghton Cut-Max BR 1529 - Neat Cutting Oil for Broaching and Severe Machining -

Houghton Cut-Max BR 1529 - Neat Cutting Oil for Broaching and Severe Machining - gf/12504

 

CUT-MAX BR 1529 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CUT-MAX BR 1529 contains active sulphur and may discolour yellow metals. The oil is chlorine free.

 

Applications:

CUT-MAX BR 1529 has been primary designed forthe high speed broaching of steel in the aim to longer the tool life and avoid chlorine. Typical parts broached with CUT-MAX BR 1529 are steering racks.

CUT -MAX BR 1529 is suitable for the hobbing, deep drilling, shaving and all operations when the pressure between the tool and material is extreme. CUT-MAX BR 1529 is used with success in many operations of ductile material machining.

 

Advantages:

  • Increased productivity - high removal rates.
  • Increased productivity - long tool life.
  • Reduced cost - energy saving.
  • Secure handling - clean working environment.

 

Pack sizes available - 180kg barrels, 20kg drums, 900kg IBC's

Discover More +
Houghton Cut-Max BR 212 ZF - Neat Cutting Oil for Broaching and Severe Machining

 

Houghton Cut-Max BR 212 ZF - Neat Cutting Oil for Broaching and Severe Machining - gf/12505

 

CUT-MAX BR 212 ZF is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CUT-MAX BR 212 ZF contains active sulphur and may discolour yellow metals. The oil is chlorine free.

 

Applications:

Cut-Max BR 212 ZF can be used as heavy duty cutting oil for all types of machining that needs special performance. Best results are achieved for broaching and deep drilling processes.

Cut-Max BR 212 ZF shows excellent performance also in gear manufacturing as shaving and shaping.

 

Advantages:

  • Increased productivity - long tool life.
  • Increased productivity - less scrap.
  • Reduced cost - long sump life.

 

Pack sizes available - 209ltr barrels, 20ltr drums

Discover More +
Houghton Cut-Max BR 30 - Neat Cutting Oil for Broaching and Severe Machining - g

Houghton Cut-Max BR 30 - Neat Cutting Oil for Broaching and Severe Machining - gf/12506

 

Cut-Max BR 30 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Cut-Max BR 30 contains active sulphur and may discolour yellow metals. The oil is chlorine free.

 

Applications:

CUT-MAX BR 30 is used for broaching steel up to 1000 N/mm2 and at speeds up to 60 rnImin. The specially developed additive package ensures high tool life, superior to chlorine- containing products.

CUT-MAX BR 30 gives high tool life when auto-lathe machining small quenched and drawn steel components.

Approved by Forst.

 

Advantages:

  • Increased productivity - long tool life.
  • Reduced cost - energy saving.
  • Increased productivity - reduced machine downtime.
  • Reduced cost - less disposal frequency.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Fenella Oil BSD 415 N - Neat Oil for Cold Extrusion - gf/12508

 

Houghton Fenella Oil BSD 415 N - Neat Oil for Cold Extrusion - gf/12508

 

FENELLA OIL BSD 415 N is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

FENELLA OIL BSD 415 N is free from Chlorine.

 

Applications:

FENELLA OIL BSD 415 N is a dual purpose cold extrusion oil wich can be used as well for the machine lubrication.

FENELLA OIL BSD 415 N is used for medium to tough machinable materials.

 

Advantages:

  • Reduced cost - longer sump life from selected raw material.
  • Reduced cost - less energy consumption due to high EP and lubricity.
  • Satisfied staff - good EHS profile, free from Chlorine and other suspect substances.
  • Simplified storage - multi purpose oil for machine lubrication and cold deformation.

 

Pack sizes available - 209kg barrels, 1000kg IBC's

Discover More +