Kernow Oils - Lubricant Solutions

Filter Your Results...

By Viscosity...
By Brand...

Neat Oils

Houghton Macron 2429 S-8 - Grinding Oil for Tungsten Carbide - gf/12460

Houghton Macron 2429 S-8 - Grinding Oil for Tungsten Carbide - gf/12460

 

MACRON 2429 S-8 is based on HC hydro crack base oil technology with very low aromatic content. A combination of polar, extreme pressure and anti-wear addivies provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 2429 S-8 is free from zinc, chlorine and active sulphur.

 

Applications:

MACRON 2429 S-8 main application is for grinding cemented carbide with diamond wheels. The product is also suitable for grinding steel with CBN and ceramic wheels at high cutting speeds. The selection of additives along with low viscosity allows finest filtration even below 1 pm mesh.

MACRON 2429 S-8 is inhibited against leaching of cobalt.

Product is approved by Waiter, Schutte, Junker, Transor.

 

Advantages:

  • Increased productivity - long tool life.
  • Increased productivity - high removal rates.
  • Reduced cost - less consumption from less evaporation.
  • Secure handling - high EHS standard.

 

Pack sizes available - 209ltr barrel, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Macron 400 M-22 - Neat Cutting, Hydraulic and Lubricating Oil - gf/1246

Houghton Macron 400 M-22 - Neat Cutting, Hydraulic and Lubricating Oil - gf/12461

 

MACRON 400 M-22 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 400 M-22 is free from zinc, chlorine and active sulphur.

 

Applications:

MACRON 400 M-22 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.

MACRON 400 M-22 has multipurpose oil characteristic for cutting and hydraulic oil HLP DIN 51524-2. It has a good de-aeration power, does not foam and is not aggressive for paints on machine tools.

 

Advantages:

  • Increased productivity - reduced machine downtime.
  • Reduced cost - long sump life.
  • Secure handling - clean working environment.
  • Secure handling - fulfills HLP standards.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Macron 400 M-32 - Neat Cutting, Hydraulic and Lubricating Oil - gf/1246

Houghton Macron 400 M-32 - Neat Cutting, Hydraulic and Lubricating Oil - gf/12462

 

MACRON 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 400 M-32 is free from zinc, chlorine and active sulphur.

 

Applications:

MACRON 400 M-32 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.

MACRON 400 M-32 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3. It has a good de-aeration power, does not foam and is not aggressive for the paints on machine tools.

 

Advantages:

  • Increased productivity - reduced machine downtime.
  • Reduced cost - long sump life.
  • Secure handling - fulfills HLP 1 CLP standards.
  • Secure handling - high EHS standard.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Macron 400 M-46 - Neat Cutting, Hydraulic and Lubricating Oil - gf/1246

Houghton Macron 400 M-46 - Neat Cutting, Hydraulic and Lubricating Oil - gf/12463

 

MACRON 400 M-46 is based on hydro treated mineral oil with low aromatic content A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 400 M-46 is free from zinc, chlorine and active sulphur.

 

Applications:

MACRON 400 M-46 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.

MACRON 400 M-46 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3. It has a good de-aeration power, does not foam and is not aggressive for paints on machine tools.

 

Advantages:

  • Increased productivity - reduced machine downtime.
  • Reduced cost - long sump life.
  • Secure handling - clean working environment.
  • Secure handling - fulfills HLP 1 CLP standards.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Macron 402 M-12 - Neat Cutting and Grinding Oil - gf/12464

Houghton Macron 402 M-12 - Neat Cutting and Grinding Oil - gf/12464

 

MACRON 402 M-12 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 402 M-12 is free from zinc, chlorine and active sulphur.

 

Applications:

MACRON 402 M-12 is a high performance cutting and grinding oil for operations on light and medium alloyed steels, aluminium and yellow metals.

MACRON 402 M-12 performs very well for fine machining processes.

 

Advantages:

  • Increased productivity - high removal rates.
  • Reduced cost - long sump life.
  • Reduced cost - clean machines.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Macron EDM 110 - Neat Oil for Spark Erosion - gf/12465

Houghton Macron EDM 110 - Neat Oil for Spark Erosion - gf/12465

 

MACRON EDM 110 is based on aliphatic hydrocarbons with very low content of aromatics for improved working conditions. High dielectric strength and good flushing properties contribute to a high removal capacity.

MACRON EDM 110 can be used with all standard electrode materials such as copper or graphite.

 

Applications:

MACRON EDM 110 is a universal spark erosion oil which shows very good results with both rough and fine machining. Even in very small erosion slots, the product shows a good flushing performance. It also performs well in EDT machines for roller texturizing.

MACRON EDM 110 can be also used for grinding cutting tools (cemented carbide), and as low viscous spindle oil e.g. for narrow fit spindles and as magnaflux inspection oil.

Approved by Waldrich and Makino.

 

Advantages:

  • Increased productivity - high removal rates.
  • Reduced cost - long sump life.
  • Secure handling - high EHS standard.
  • Secure handling - has OEM approvals.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Macron SL 501 - Minimum Quantity Lubricant - gf/12466

Houghton Macron SL 501 - Minimum Quantity Lubricant - gf/12466

 

MACRON SL 501 is based on high purity fatty alcohols. Thus the product is free from aromatic components. The raw material is selected to have a low pourpoint for use in cold environment.

MACRON SL 501 is free from zinc, chlorine, phosphorous and sulphur.

 

Applications:

MACRON SL 501 is used for MOL application mainly for the machining of aluminium and alloys. The machined parts are very clean if the MOL equipment is adjusted the right way.

MACRON SL 501 does not require cleaning in most of the applications.

 

Advantages:

  • Increased productivity - high removal rates.
  • Secure handling - high EHS standard.
  • Secure handling - clean working environment.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Mould Lubric 105 - Neat Drawing Oil - gf/12470

Houghton Mould Lubric 105 - Neat Drawing Oil - gf/12470

 

MOULD LUBRIC 105 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MOULD LUBRIC 105 is free from Chlorine.

 

Applications:

MOULD LUBRIC 105 is medium viscosity non-chlorinated product for general purpose use specifically for applications to replace the use of chlorine.

MOULD LUBRIC 105 is used for medium to tough machinable materials.

 

Advantages:

  • Reduced cost - improved tool life due to high EP power.
  • Reduced cost - less energy consumption due to high EP and lubricity.
  • Reduced cost - easy to be washed off with standard cleaners.
  • Reduced cost - higher production rates due to strong lubricity.

 

Pack sizes available - 190kg barrels, 900kg IBC's

Discover More +
Houghton Mould Lubric 114 - Neat Drawing Oil - gf/12471

Houghton Mould Lubric 114 - Neat Drawing Oil - gf/12471

 

MOULD LUBRIC 114 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MOULD LUBRIC 114 contains Chlorine and active Sulphur.

 

Applications:

MOULD LUBRIC 114 medium to low viscosity sulphur chlorinated product with an exceptional lubricity package to give optimum performance even under the most arduous conditions.

MOULD LUBRIC 114 is used for steels of medium to high tensile strength and stainless steels.

 

Advantages:

  • Reduced cost - improved tool life due to high EP power.
  • Reduced cost - less energy consumption due to high EP and lubricity.
  • Reduced cost - easy to be washed off with standard cleaners.
  • Reduced cost - higher production rates due to strong lubricity.

 

Pack sizes available - 203ltr barrels, 996ltr IBC's

Discover More +
Houghton Mould Lubric 116 - Neat Drawing Oil - gf/12472

Houghton Mould Lubric 116 - Neat Drawing Oil - gf/12472

 

MOULD LUBRIC 116 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MOULD LUBRIC 116 contains Chlorine and active Sulphur.

 

Applications:

MOULD LUBRIC 116 medium to low viscosity sulphur chlorinated product with an exceptional lubricity package to give optimum performance even under the most arduous conditions.

MOULD LUBRIC 116 is used for steels of medium to high tensile strength and stainless steels.

 

Advantages:

  • Reduced cost - improved tool life due to high EP power.
  • Reduced cost - less energy consumption due to high EP and lubricity.
  • Reduced cost - easy to be washed off with standard cleaners.
  • Reduced cost - higher production rates due to strong lubricity.

 

Pack sizes available - 996ltr IBC's

Discover More +