Kernow Oils - Lubricant Solutions

Filter Your Results...

By Viscosity...
By Brand...

Neat Oils

Houghton Fenella Oil D 601 - Neat Drawing Oil - gf/12373

Houghton Fenella Oil D 601 - Neat Drawing Oil - gf/12373

 

FENELLA OIL D 601 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

FENELLA OIL D 601 is free from Chlorine and heavy metals (Zinc).

 

Applications:

FENELLA OIL D 601 is a special oil for stamping, blanking and drawing operations.

The very high content of chlorine-free EP additives guarantees a long tool-life even when machining steels of high tensile strength and material thickness up to 4 mm.

FENELLA OIL D 601 has very good de-emulsifying properties in alkaline cleaners.

 

Advantages:

  • Reduced cost - Longer sump life from selected raw material.
  • Reduced cost - Less energy consumption due to high EP and lubricity.
  • Satisfied staff - Good EHS profile, free from Chlorine and other suspect substances.
  • Reduced cost - Easy to be washed off with standard cleaners.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Fenella Oil D 604 - Neat Drawing Oil - gf/12374

Houghton Fenella Oil D 604 - Neat Drawing Oil - gf/12374

 

FENELLA OIL D 604 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

FENELLA OIL D 604 is free from Chlorine and heavy metals (Zinc).

 

Applications:

FENELLA OIL D 604 is a special oil for stamping, blanking and drawing operations. The very high content of chlorine-free EP additives guarantees a long tool-life even when machining steels of very high tensile strength and material thickness up to 10 mm.

FENELLA OIL D 604 is used for steels of medium to high tensile strength and stainless steels.

 

Advantages:

  • Reduced cost - Longer sump life from selected raw material.
  • Reduced cost - Less energy consumption due to high EP and lubricity.
  • Satisfied staff - Good EHS profile, free from Chlorine and other suspect substances.
  • Reduced cost - Easy to be washed off with standard cleaners.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Fenella Oil D 605 - Neat Drawing Oil - gf/12375

Houghton Fenella Oil D 605 - Neat Drawing Oil - gf/12375

 

FENELLA OIL D 605 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

FENELLA OIL D 605 is free from Chlorine and heavy metals (Zinc).

 

Applications:

FENELLA OIL D 605 is a special heavy duty oil for stamping, drawing, deep drawing, bold & screw drawing and thread rolling operations.

The very high content of chlorine-free EP additives guarantees a long tool life even when machining steels of very high tensile strength and material with low carbon content.

FENELLA OIL D 605 can also be used for removal operations.

 

Advantages:

  • Reduced cost - Longer sump life from selected raw material.
  • Reduced cost - Less energy consumption due to high EP and lubricity.
  • Satisfied staff - Good EHS profile, free from Chlorine and other suspect substances.
  • Reduced cost - Easy to be washed off with standard cleaners.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Fenella VD 401 N - Vanishing Stamping Oil - gf/12376

Houghton Fenella VD 401 N - Vanishing Stamping Oil - gf/12376

 

FENELLA VD 401 N is based on high purity solvent with low aromatic content. The additives are selected to provide high lubricity in combination with low residue after evaporation.

FENELLA VD 401 N is free from Chlorine, Sulphur, Phosphorous and heavy metals (Zinc).

 

Applications:

FENELLA VD 401 N is a volatile product for stamping and drawing of thin to medium thickness non-ferrous and ferrous materials.

FENELLA VD 401 N leaves minimal residual film and doesn't react with paint.

 

Advantages:

  • Reduced cost - Higher production rates due to strong lubricity.
  • Reduced cost - Easy to be washed off with standard cleaners.
  • Satisfied staff - Good EHS profile, reduced smell.
  • Satisfied staff - Light color for good monitoring of the operation.

 

Pack sizes available - 203ltr barrels, 20ltr drums

Discover More +
Houghton Fenella VD 601 N - Vanishing Stamping Oil - gf/12377

Houghton Fenella VD 601 N - Vanishing Stamping Oil - gf/12377

 

FENELLA VD 601 N is based on high purity solvent with low aromatic content. The additives are selected to provide high lubricity in combination with low residue after evaporation.

FENELLA VD 601 N is free from Chlorine, Sulphur, Phosphorous and heavy metals (Zinc).

 

Applications:

FENELLA VD 601 N is a volatile product for stamping and drawing of thin to medium thickness non-ferrous and ferrous materials.

FENELLA VD 601 N leaves small residual film and doesn't react with paint.

 

Advantages:

  • Reduced cost - Higher production rates due to strong lubricity.
  • Reduced cost - Easy to be washed off with standard cleaners.
  • Satisfied staff - Good EHS profile, reduced smell.
  • Satisfied staff - Light color for good monitoring of the operation.

 

Pack sizes available - 203ltr barrels, 20ltr drums

Discover More +
Houghton Fenella VSD 2401 N - Vanishing Stamping Oil - gf/12378

Houghton Fenella VSD 2401 N - Vanishing Stamping Oil - gf/12378

 

Fenella VSD 2401 N is based on high purity VaC-free aliphatic hydrocarbon with low aromatic content. The additives are selected to provide high lubricity in combination with low residue after evaporation.

Fenella VSD 2401 N is free from Chlorine, Sulphur, Phosphorous and heavy metals (Zinc).

 

Applications:

Fenella VSD 2401 N is a volatile product for stamping and drawing of thin galvanized steel, non-ferrous and ferrous materials.

The product does not leave a residual film and does not react with paint.

Degreasing of the components before assembly or welding is not necessary.

Fenella VSD 2401 N shows also excellent performance for the honing and super finishing operations.

 

Advantages:

  • Reduced cost - Higher production rates due to strong lubricity.
  • Reduced cost - Easy to be washed off with standard cleaners.
  • Satisfied staff - Good EHS profile, reduced smell.
  • Satisfied staff - Light color for good monitoring of the operation.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +
Houghton Cut-Max DC 32 - Neat Cutting Oil - gf/12436

Houghton Cut-Max DC 32 - Neat Cutting Oil - gf/12436

 

CUT-MAX DC 32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CUT-MAX DC 32 contains active sulphur and may discolour yellow metals. The oil is chlorine free.

 

Applications:

CUT-MAX DC 32 is a high performance cutting oil for operations on light and medium alloyed steels and on non- ferrous and light metals (Mg).

CUT-MAX DC 32 is a multipurpose oil which has characteristics from both hydraulic oil and gear oil.

 

Advantages:

  • Increased productivity - long tool life.
  • Reduced cost - energy saving.
  • Reduced cost - long sump life.

 

Pack sizes available - 20kg drums

Discover More +
Houghton Cut-Max DC 46 - Neat Cutting Oil - gf/124

Houghton Cut-Max DC 46 - Neat Cutting Oil - gf/12437

 

CUT-MAX DC 46 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CUT-MAX DC 46 is chlorine free.

 

Applications:

Cut-Max DC 46 is a multipurpose oil which has characteristics from both hydraulic oil and gear oil. Cut-Max DC 46 is mainly designed for older machine tools with high leakage rates.

 

Advantages:

  • Increased productivity - long tool life.
  • Reduced cost - energy saving.
  • Reduced cost - long sump life.

 

Pack sizes available - 185kg barrels, 850kg IBC's

Discover More +
Houghton Cut-Max BR 500 - Neat Cutting Oil for Broaching and Severe Machining -

Houghton Cut-Max BR 500 - Neat Cutting Oil for Broaching and Severe Machining - gf/12438

 

CUT-MAX BR 500 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CUT-MAX BR 500 contains active sulphur and may discolour yellow metals. The oil is chlorine free.

 

Applications:

CUT-MAX BR 500 is used for the broaching of steel, as e.g. conneting rods or steering racks. The oil is also recommended for deep drilling operation with BTA or Ejector tools.

CUT-MAX BR 500 provides long tool life for all severe machining operations.

 

Advantages:

  • Increased productivity - high removal rates.
  • Reduced cost - energy saving.
  • Reduced cost - clean machines.
  • Reduced cost - less disposal frequency.

 

Pack sizes available - 185kg barrels, 950kg IBC's

Discover More +
Houghton Cut-Max D 960-4 E - Neat Cutting Oil for Broaching and Severe Machining

Houghton Cut-Max D 960-4 E - Neat Cutting Oil for Broaching and Severe Machining - gf/12439

 

CUT -MAX D 960-4E is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

CUT-MAX D 960-4E contains active sulphur and may discolour yellow metals. The oil is chlorine free.

 

Applications:

CUT-MAX D 960-4E is used for the broaching of steel and other alloys with a tensile strength up to 1400 N/mm'. Excellent results are also achieved for tapping operations or with automatic lathes.

CUT-MAX D 960-4E shows excellent performance for the machining of nickel alloys and other most difficult to cut materials.

 

Advantages:

  • Increased productivity - long tool life.
  • Increased productivity - less scrap.
  • Reduced cost - energy saving.
  • Secure handling - has OEM approvals.

 

Pack sizes available - 209ltr barrels, 20ltr drums, 1000ltr IBC's

Discover More +