Kernow Oils - Lubricant Solutions

Filter Your Results...

By Viscosity...
By Brand...

Neat Oils

Houghton Garia 405 M-32 - Neat cutting oil - 02811

Houghton Garia 405 M-32 - Neat cutting oil for machining and grinding - 02811

 

Garia 405 M-32 is a neat cutting oil for machining higher alloyed steels, aluminum and magnesium alloys. Garia 405 M-32 is a chlorine free product. It is free of heavy metals and has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and antiwear additives which give the oil high load carrying properties. Due to its active sulfur content the oil may discolor yellow metals.

 

Applications:

Garia 405 M-32 is recommended for general machining operations such as turning, drilling and gear hobbing on steel of low to medium tensile strength, aluminum and magnesium alloys.
It is also suitable for grinding where higher viscosity is required, e.g. thread grinding.

Garia 405 M-32 is used neat as supplied.

 

Advantages:

  • High EP and anti-wear properties
  • Good tool life and improved surface finish of the machined work pieces
  • Excellent oxidation stability
  • Skin compatible and friendly
  • Chlorine free
  • Free of heavy metals (zinc free)

 

Available pack sizes: 209ltr

Discover More +
Houghton Garia 498 F-10 - Neat cutting oil - 02813

Houghton Garia 498 F-10 - Neat cutting oil for machining and gun drilling - 02813

 

Garia 498 F-10 is based on hydro treated mineral oils with a low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good tool life and good surface finish of the machined work pieces. Due to its active sulfur content the oil may discolour yellow metals.

 

Applications:

Garia 498 F-10 is neat cutting oil for deep hole drilling in light to medium alloyed steels and cast iron. The product is also suitable for general machining where low viscosity is required.

Garia 498 F-10 is used neat as supplied.

 

Advantages:

  • Good EP and anti-wear properties
  • Good tool life and improved surface finish of the machined work pieces
  • Excellent oxidation stability
  • Skin compatible and friendly
  • Chlorine free
  • Free of heavy metals (zinc free)

 

Available pack sizes: 1000ltr IBC & 209ltr

Discover More +
Houghton Garia 499 CM-10 - Neat cutting oil - 02814

Houghton Garia 499 CM-10 - Neat cutting oil for machining and gun drilling - 02814

 

Garia 499 CM-10 is a product which contains chlorine. It has a well balance combination of polar, extreme pressure and anti-wear additives which give the oil high load carrying properties. Due to its active sulfur content, the product may discolour yellow metals.

 

Applications:

Garia 499 CM-10 is recommended for general machining operations such as grinding, deep hole drilling and gear hobbing on steel of low to medium tensile strength, aluminium and magnesium alloys.

Garia 499 CM-10 is used neat as supplied.

 

 

Advantages: 

  • Good EP and anti-wear properties
  • Good tool life and improved surface finish of the machined work pieces
  • Excellent oxidation stability
  • Skin compatible and friendly

 

Available pack sizes: 1000ltr IBC & 209ltr

Discover More +
Houghton Garia 601 M-22 - Neat cutting oil - 02816

Houghton Garia 601 M-22 - Neat cutting oil for machining and grinding - 02816

 

Garia 601 M-22 is based on hydro treated mineral oils with a low aromatic content. A well balanced combination of polar, extreme pressure and anti-wear additives provides the oil with high load carrying properties. The high additive content and controlled extreme pressure properties allow high rates of metal removal, which results in reduced machining costs. The oil provides good tool life and excellent surface finish of the machined work pieces. Efficient anti mist additives reduce mist in the air. Due to its active sulfur content the oil may discolor yellow metals.

 

Applications:

Garia 601 M-22 is recommended for machining high alloyed steels, stainless, heat resistant or austenitic steels and aluminum or magnesium alloys.
The oil gives excellent results with many difficult operations such as broaching, deep-hole drilling, tapping, shaping or shaving of gears.

Garia 601 M-22 is used neat as supplied.

 

Advantages:

  • High EP and anti-wear properties.
  • Good tool life and improved surface finish of the machined work pieces.
  • Excellent oxidation stability.
  • Skin compatible and friendly.
  • Chlorine free.
  • Free of heavy metals (zinc free).

 

Available pack size: 209ltr

Discover More +
Houghton Macron 205 M-5 - Neat Honing and Grinding Oil - 02830

Houghton Macron 205 M-5 - Neat Honing and Grinding Oil - 02830

 

Macron 205 M-5 is based on hydro treated mineral oils with a low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides long tool life and good surface finish of the machined work pieces. There is no risk of staining yellow metals.

 

Applications:

Macron 205 M-5 is used for honing cast iron and steels hardened by tempering or cementation. This oil is also used for machining light metals, magnesium and glass at high cutting speeds, or for grinding tools with diamond or ceramic wheels.

Macron 205 M-5 is used neat as supplied.

 

Advantages:

  • Chlorine free
  • Sulfur free
  • Free of heavy metals
  • Light colour
  • Light odour
  • High flashing power
  • High detergency

 

Available pack sizes: 209ltr

Discover More +
Houghton Macron 2425 S-8 - Neat Cutting and Grinding Oil - 02834

Houghton Macron 2425 S-8 - Neat Cutting and Grinding Oil - 02834

 

Macron 2425 S-8 is a chlorine-free, high performance neat grinding oil. Macron 2425 S-8 is based on hydrocracked mineral base oil for enhanced skin compatibility. A well selected combination of chemically active anti-wear additives together with polar additives provide particularly high load carrying properties. Through this, prolonged tool life and excellent surface finish are achieved.

 

Applications:

Macron 2425 S-8 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels. Macron 2425 S-8 can also be used for grinding spiral toothed bevel gears, and flat or cylindrical grinding processes on the complete range of steels and non-ferrous metals.

Macron 2425 S-8 is used neat as supplied.

 

Advantages:

  • Chlorine free.
  • Low aromatic components.
  • Low oil mist and vapour.
  • Free of heavy metals.
  • Extended sump life.
  • Very good tool protection.
  • Light colour.
  • Light odour.

 

Available pack sizes: 209ltr

Discover More +
Houghton Macron 298 F-32 - Neat cutting oil - 02837

Houghton Macron 298 F-32 - Neat cutting oil for general machining - 02837

 

Macron 298 F-32 is a chlorine free product with low aromatic content. A well balanced combination of polar and extreme pressure additives gives the oil high load carrying properties.

 

Applications:

Macron 298 F-32 is a cutting oil for operations on light and medium alloyed steels, aluminum and yellow metals. It has a good air release, good foam behavior and is not aggressive to the paint of machine tools.

Macron 298 F-32 is used neat as supplied.

 

Advantages:

  • Chlorine free
  • Low aromatic components
  • Low oil mist and vapor
  • Free of heavy metals
  • Light colour
  • Light odour

 

Available pack sizes: 209ltr & 20ltr

Discover More +
Houghton Macron 4201 F-32 - Neat cutting oil - 02845

Houghton Macron 4201 F-32 - Neat cutting oil - 02845

 

Macron 4201 F-32 is a mineral-oil based, extreme-pressure, general purpose, neat cutting oil designed for machining ferrous and yellow metals.

 

Applications:

  • Automatic and semiautomatic machine tools.
  • General machining.
  • General machine lubrication including hydraulics.

Macron 4201 F-32 is used neat as supplied.

 

Advantages:

  • Chlorine free
  • Light colour
  • Light odour
  • High detergency

 

Available pack sizes: 1000ltr IBC

Discover More +
Houghton Cut-Max SE2 - EDM fluid - 08200

Houghton Cut-Max SE2 - Multi-purpose dielectric fluid for spark erosion - 08200

 

Cut-Max SE2 is a transparent, very low odour, low viscosity dielectric fluid for superfine finishing operations.

 

Applications:

Cut-Max SE2 is specialist fluid for EDM machining and is especially designed for superfine finishing operations. Main applications include machining of moulds for diecasting or plastic injection machines and in aerospace turbine blade production. Cut-Max SE2 is used for fine boring of aerofoil honeycombs in nickel alloys. e.g. Inconel 718. Cut-Max SE2 has Rolls Royce CSS 142A approval. Cut-Max SE2 can be used on individual machines and in centralised systems.

 

Advantages:

  • Very low odour and smoke-free operation for operator preference.
  • Efficient flushing of spark debris minimising microsoldering between component, swarf and electrode.
  • Very low viscosity for fine surface finish.
  • Suitable for all types of filtration including diatomeous earth.
  • Highly resistant to oxidation for long service life.

 

Available pack sizes: 205ltr & 20ltr

Discover More +
Houghton Macron EDM 130 - EDM fluid - 08221

Houghton Macron EDM 130 - Neat EDM Oil for Spark Erosion - 08221

 

Macron EDM 130 is based on paraffinic hydrocarbons. Its very low aromatic content improves working conditions. The product is colourless and has a very low odour. The high dielectric strength and good flushing properties contribute to a high stock removal capacity. Macron EDM 130 shows excellent chemical compatibility and a good filtration performance with usual filter media. Macron EDM 130 can be used with graphite and copper electrodes.

 

Applications:

Macron EDM 130 is a high viscosity spark erosion oil, for roughing. The product also shows a good flushing performance in very small erosion slots. A surface roughness of 3 μm or lower is possible. In addition, Macron EDM 130 can be used for grinding cutting tools (cemented carbide), and as low viscous spindle oil e.g. for narrow fit spindles and as magnaflux inspection oil.

Macron EDM 130 is used neat as supplied.

 

Advantages:

  • Chlorine free
  • Low aromatic components
  • Free of heavy metals
  • High dielectric strength
  • Low volatility

 

Available pack sizes: 209ltr

Discover More +