Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

Neat Oils

Castrol Ilocut 103 - High Performance Neat Cutting Oil - 7151

Castrol Ilocut 103 - High Performance Neat Cutting Oil - 7151

 

Castrol Ilocut™ 103 is a medium viscosity, chlorine and heavy metal free neat cutting oil. It is based on sulphurised fatty material blended with highly refined mineral oil. Special manufacturing techniques have produced a blend which is paler in colour and much blander of odour than conventional sulphurised cutting fluids, with no loss of performance.

 

Application

Ilocut 103 is designed for gear cutting and general machining of cast iron, high alloyed steels and yellow metals.

 

Discover More +

Castrol Ilocut EDM 200 - High Performance Electric Discharge Machining Fluid - 7

Castrol Ilocut EDM 200 - High Performance Electric Discharge Machining Fluid - 7152

 

Castrol IlocutTM EDM 200 is a low viscosity mineral oil based high performance electric discharge machining (EDM) fluid, designed to enable optimum rates of metal removal, together with low electrode wear, good surface finish and fine tolerances. It is especially formulated to provide exceptional performance in all spark-erosion applications.

 

Application

Ilocut EDM 200 is recommended for use on all ferrous and non ferrous metals. It can be used in electric discharge machines of all sizes and is equally suitable for roughing as well as finishing operations.

 

Advantages

  • Low viscosity ensures good cooling and flushing action in narrow spark gaps
  • Very low odour and light colour result in greater operator acceptability
  • Very low aromatics result in a safe and pleasant work environment
  • Excellent filterability and high oxidation stability ensures long service life

 

Pack sizes available - 208L drum

Discover More +
Castrol Ilocut EDM 180 - High Performance Electric Discharge Machining Fluid - 7

Castrol Ilocut EDM 180 - High Performance Electric Discharge Machining Fluid - 7156

 

Castrol IlocutTM EDM 180 is a low viscosity mineral oil based high performance electric discharge machining (EDM) fluid, designed to enable optimum rates of metal removal, together with low electrode wear, good surface finish and fine tolerances. It is especially formulated to provide exceptional performance in all spark-erosion applications.

 

Application

Ilocut EDM 180 is recommended for use on all ferrous and non ferrous metals. It can be used in electric discharge machines of all sizes and is equally suitable for roughing as well as finishing operations.

 

Advantages

  • Low viscosity ensures good cooling and flushing action in narrow spark gaps
  • Low odour and light colour result in greater operator acceptability
  • Lower aromatics result in a safe and pleasant work environment
  • Excellent filterability and high oxidation stability ensures long service life

 

Pack sizes available - 20L, 208L drum

Discover More +
Castrol Ilocut 820 - High Performance Neat Cutting Oil - 7157

Castrol Ilocut 820 - High Performance Neat Cutting Oil - 7157

 

Castrol Ilocut™ 820 is a chlorine and heavy-metal free neat cutting oil especially formulated with a unique combination of ester, extreme pressure (EP) additives and base oil to optimise machining performance, enhance surface finish and lower the overall operating costs.

 

Application

Ilocut 820 is designed for grinding, general machining and deep drilling of ferrous metals, low and medium alloyed steels. It contains active sulphur and may not be suitable for yellow metals.

 

Discover More +

Castrol Ilocut EDM 401 - High Performance Electric Discharge Machining Fluid - 7

Castrol Ilocut EDM 401 - High Performance Electric Discharge Machining Fluid - 7158

 

Castrol IlocutTM EDM 401 is a medium viscosity mineral oil based high performance electric discharge machining (EDM) fluid, designed to enable optimum rates of metal removal, together with low electrode wear, good surface finish and fine tolerances. It is especially formulated to provide exceptional performance in all spark-erosion applications.

 

Application

Ilocut EDM 401 is recommended for use on all ferrous and non ferrous metals. It is designed for large electric discharge machines and is particularly suited for roughing operations where high rate of metal removal is required.

 

Advantages

  • Optimum viscosity ensures good cooling and flushing action in narrow spark gaps
  • Low odour and light colour result in greater operator acceptability
  • Lower aromatics result in a safe and pleasant work environment
  • Excellent filterability and high oxidation stability ensures long service life

 

Pack sizes available - 208L drum, 1000L IBC

Discover More +
Castrol Ilocut 154 - High Performance Neat Cutting Oil - 7219

Castrol Ilocut 154 - High Performance Neat Cutting Oil - 7219

 

Castrol Ilocut™ 154 is a chlorine and heavy metal free neat cutting oil. It is a medium viscosity mineral oil based neat cutting oil with inactive sulphur additions.

 

Application

Ilocut 154 is designed for general machining of medium alloyed steel and non-ferrous metals.

Castrol Ilocut 154 is normally applied to less exacting machining operations, whilst retaining its serviceability for the cutting of both ferrous and non-ferrous stocks, thanks to the non stain form in which the sulphur is combined. In this way, Castrol Ilocut 154 gives excellent results on multi-spindle automatics, on capstan and turret lathes and on routine machining duties where medium tensile steels up to 45 tons tensile are cut or when alternating with non-ferrous metals. There are opportunities for oil rationalisation when using this grade, for since Castrol Ilocut 154 is equally satisfactory when cutting cuprous metal or steels, its introduction into the machine shop may well eliminate the necessity to carry stocks of two or more different neat oils to meet the production requirements of a particular section.

 

Discover More +

Castrol Ilocut 482 - High Performance Neat Cutting Oil - 7437

Castrol Ilocut 482 - High Performance Neat Cutting Oil - 7437

 

Castrol Ilocut™ 482 is a medium viscosity, chlorinated neat cutting oil.

 

Application

Ilocut 482 is designed for general machining, grinding and broaching of cast iron to high alloy steels and nonferrous metals.

 

Discover More +

Castrol Ilocut 486 - High Performance Neat Cutting Oil - 7442

Castrol Ilocut 486 - High Performance Neat Cutting Oil - 7442

 

Castrol Ilocut™ 486 is a medium viscosity, chlorinated neat cutting oil.

 

Application

Ilocut 486 is designed for general machining, grinding, broaching and gear manufacturing of high alloyed steels and non-ferrous metals.

 

Discover More +

Castrol CareCut ES 1 - High Performance Neat Cutting Oil - 7443

Castrol CareCut ES 1 - High Performance Neat Cutting Oil - 7443

 

Castrol CareCut™ ES 1 is a chlorine and heavy metal free neat cutting oil, based on advanced biodegradable ester technology. It is especially formulated with a unique combination of anti-wear additives and boundary lubricants to optimise machining performance, enhance surface finish and lower the overall operating costs. It can be used in single sump machines and large central systems.

 

Application

CareCut ES 1 is especially designed for several machining applications including general machining, broaching and gear manufacture of ferrous and non ferrous metals. CareCut ES 1 does not contain active sulphur and is hence compatible with yellow metals.

 

Discover More +

Castrol CareCut ES 2 - High Performance Neat Cutting Oil - 7444

Castrol CareCut ES 2 - High Performance Neat Cutting Oil - 7444

 

Castrol CareCut™ ES 2 is a chlorine and heavy metal free neat cutting oil based on advanced biodegradable ester technology. It is especially formulated with a unique combination of sulphur and phosphorus based anti-wear additives to optimise machining performance, enhance surface finish and lower the overall operating costs. It can be used in single sump machines and large central systems.

 

Application

CareCut ES 2 is designed for high speed, creep feed and gear grinding of ferrous and non ferrous metals. It can also be used for drilling and general machining applications, as well as for hard metal and tool grinding. CareCut ES 2 does not contain active sulphur and is hence compatible with yellow metals.

 

Discover More +