Kernow Oils - Lubricant Solutions

Filter Your Results...

Selected...

Also filter...

By Brand...

Hydraulic Oils

BP Bartran HV 22 - Hydraulic Oil

BP Bartran HV 22 - Hydraulic Oil

 

Description
Bartran HV is a range of high performance, zinc free hydraulic oils.

 

Application
Bartran HV is a range of oils designed for general use in hydraulic systems including critical high pressure systems such as those used for cargo handling. For very low temperature operation and the requirements of control systems with long small bore pipe-runs, please refer to the data sheet entitled -Special Hydraulic Oil.

 

Main Performance Features
• Excellent filterability even in the presence of water.
• High viscosity index (VI) permits operation over a wide range of temperatures and limits peak system pressures under
'cold starting'.
• Compatible with all metals normally used in hydraulic systems - including silver.
• Good anti-wear properties give very low rates of wear in pumps and motors.
• High oxidation stability ensuring long oil life.
• Rust inhibited to provide protection in pipework and equipment internals.

 

Approvals
Approved by, or meets the specification requirements of, major hydraulic pump, valve and motor manufacturers. A 52 cSt. grade is approved for Framo initial fill.

Discover More +
BP Energol HLP-HM 22 - High Performance Hydraulic Oil

BP Energol HLP-HM 22 - High Performance Hydraulic Oil

 

Description
A range of mineral oil-based hydraulic fluids conforming to the international classification ISO Type HM and offering a wide choice of viscosities.
The properties of their solvent-refined base oils are enhanced by full additive treatment to minimize corrosion, oxidation, foaming and machinery wear.

 

Applications
Energol HLP -HM oils are formulated for highly stressed hydraulic systems where high levels of anti-wear performance are needed and meet filtration requirements of almost every hydraulic system (down to 6 micron filters). They are also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as in lightly loaded gears, in some variable speed units and in bearings.

The HLP -HM range is fully compatible with the elastomers materials commonly used for static and dynamic seals, such as:
. Nitryl butyl (PERBUNAN* or BUNA N*)
. Fluorinated (VITON*/TEFLON*)
. Perfluorinated (KABREZ*) . Polyester (HYTREL*)
. Polyurethane (ADIPRENE*) * trade marks
The Energol HLP-HM oils meet the performance requirements of  DIN 51 524 Part 2 'Hydraulic Oils Type H-LP'and of ISO 6743/4 'Hydraulic Oils Type HM' (NF E 48-603 and NF E 60-203).


They meet the specifications/requirements of many major manufacturers, namely:
. Denison HF-0, HF-2
. Vickers industrial machinery, meets form I-286 –S (pump 35V.Q.25)
. Rexnord-Racine vane pumps
. Mannesman Rexroth Hydromatik piston pumps
. Sigma-Rexroth gear pumps
. Cincinnati Milacron (p. 68-69-70)
. US Steel 136

 

Main Benefits

  • High degree of equipment protection
  • Excellent performance in anti-wear protection, oxidation resistance and thermal stability
  • Excellent de-aeration characteristics
  • Compatibility with other mineral oils
  • Good filterability
Discover More +
Total Azolla ZS 22 - Hydraulic oil - 110473

Total Azolla ZS 22 - Hydraulic oil - 110473

 

Very high performance anti-wear hydraulic oils.

 

Applications:

Designed for use in all kind of hydraulic sytems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment. Also used in many other applications, where an universal high performance anti-wear lubricant is the first choice : low charged gears, sliding and roller bearings, air compressors, servo-motors and control systems equipped with fine filtration systems.

 

Specifications:

AFNOR NF E 48-603 HM
ISO 6743/4 HM
DIN 51524 P2 HLP
CINCINNATI MILACRON P68, P69, P70
VICKERS M-2950S, -I-286
DENISON HF0, HF1, HF2 (T6H20C)

 

Advantages:

  • High protection against wear insuring maximum equipment life.
  • Superior thermal stability avoiding formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • Remarkable filterability even in the presence of water.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Good demulsibility ensuring rapid water separation
  • Reduced maintenance and operating costs.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Equivis ZS 22 - Hydraulic Oils - 112485

Total Equivis ZS 22 - Hydraulic Oils - 112485

 

High viscosity index anti-wear hydraulic oils.

 

Applications:

The Equivis ZS range is recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature (up to 100°C in hot points). Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside. Provides easy start up at low temperature (-30°C) and regular operating in all seasons for civil engineering, agriculture, marine, transport and other industrial applications.

 

Specifications:

  • AFNOR NF E 48-603 HV
  • ISO 6743/4 HV
  • DIN 51524 P3 HVLP
  • CINCINNATI MILACRON P68, P69, P70
  • VICKERS M-2950S, -I-286

 

Advantages:

  • Very high viscosity index
  • Good shear stability.
  • Superior thermal stability avoiding the formation of sludge even at high temperature.
  • Very good oxidation stability ensuring a long service life of the fluid.
  • High protection against wear insuring maximum equipment life.
  • Excellent hydrolytic stability avoiding filter blocking.
  • Remarkable filterability even in the presence of water.
  • Excellent protection against rust and corrosion.
  • Good anti-foam and air release properties by using silicon free components.
  • Very low pour point.
  • Good demulsibility ensuring rapid water separation.

 

Pack sizes available - 20L

Discover More +
Castrol Tribol 1840-22 Foodproof - Food Machinery Hydraulic Oil - 4490

Castrol Tribol 1840-22 Foodproof - Food Machinery Hydraulic Oil - 4490

 

Tribol 1840 Food Machinery Hydraulic Oils are anti-wear hydraulic oils with exceptional oxidation stability, which offers prolonged life of the oil in hydraulic systems. USDA H1 / NSF Approved certificate no. 134157.

Available in 16Kg cans

 

Application

Tribol 1840 Food Machinery Hydraulic Oils are high performance hydraulic oils, formulated especially to meet stringent requirements of the US Department of Agriculture 'H1' approval and are designed for use in the food and beverage industry where incidental contact with food is possible. They are available in ISO viscosity grades 22, 32, 46 and 68. Foaming is controlled by the use of special components and inhibitors. Tribol 1840 Food Machinery Hydraulic Oils are for use in hydraulic systems where anti-wear and anti-oxidation properties are required. Tribol 1840/22 is particularly suited for use in airlines and lubrication for pneumatic systems. Tribol 1840 oils possess good water separation properties making them ideal for use in breweries and the beverage industry.

 

 

User benefits include:

  • Exceptional anti-wear properties
  • Exceptional oxidation resistance - offering prolonged oil lifetimes compared with standard hydraulic oils and white oils normally used in the food industry
  • High load carrying ability - shown by the result (> 12 stages) in the FZG Test
  • Meets the requirements of USDA 'H1' - food quaility oil
Discover More +
Castrol Hyspin AWS 22 - Antiwear Hydraulic Oils - 6017

Castrol Hyspin AWS 22 - Antiwear Hydraulic Oils - 6017

 

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using the very latest additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. The Castrol Hyspin AWS hydraulic oil range is based upon highly refined mineral oil with a low zinc containing anti-wear system.

 

Application

The Hyspin AWS range are hydraulic oils for use in gear, vane, radial piston, and axial piston pumps where pressures and speeds require anti-wear oils and are specified by equipment manufacturers. This range is designed for use in industrial hydraulic systems which require anti-wear protection. It is also suitable for other duties in which lubricants of high oxidation stability and lubrication performance are required, such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.


Hyspin AWS is classified as follows:
DIN 51502 classification - HLP
ISO 6743/4 - Hydraulic Oils Type HM

Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 2
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Bosch Rexroth RE90220


Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Excellent anti-wear performance gives wear protection and reduces downtime from unscheduled maintenance.
  • Good filterability characteristics (including in the presence of water) enables cost savings to be made from increased filter life and reduced maintenance.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.


Additional Information:
Seal Compatibility: Suitable for use with Nitrile, Buna-N, Viton and Silicone seal materials.


ISO Viscosity and pack sizes available:
HYSPIN AWS 10 – 20L & 208L
HYSPIN AWS 15 – 20L & 208L
HYSPIN AWS 22 – 20L, 208L & Bulk delivery
HYSPIN AWS 32 – 4x5L, 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 46 – 4x5L, 20L, 208L, 1000L IBC & delivery
HYSPIN AWS 68 – 20L, 208L, 1000L IBC & Bulk delivery
HYSPIN AWS 100 – 20L, 208L & Bulk delivery
HYSPIN AWS 150 – 208L

Discover More +
Castrol Hyspin Spindle Oil 22 - 6027

Castrol Hyspin Spindle Oil 22 - 6027

 

The Castrol Hyspin™ Spindle Oil range is based upon highly refined mineral oil enhanced with rust and oxidation inhibitors and formulated especially for the lubrication of high speed and precision machine tool spindle bearings.

Available in: 20L, 208L drums

 

Application

Castrol Hyspin Spindle Oil has been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. The Hyspin Spindle Oil is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin Spindle Oil is classified as follows:
DIN 51502 classification – HL
ISO 6743/4 - Hydraulic Oils Type HL
ISO 6743/2 – Spindle Oils Type FC

Hyspin Spindle oil meets or exceeds the following industry specifications:
Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22
Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10
Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

 

Advantages

  • Good thermal and oxidative stability leads to longer operating life, reduction in lubricant costs and minimises deposit formation giving a cleaner system.
  • Good protection of yellow metal and ferrous components helps maintain and prolong equipment life.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Controlled foaming to provide consistent lubrication under the high agitation conditions found in spindle bearings.

 

Note: For viscosities above 22 cSt use the relevant R&O Hydraulic Oil (Castrol Hyspin VG range)

Discover More +
Castrol Hyspin HVI 22 - High viscosity index anti-wear hydraulic oils - 6037

Castrol Hyspin HVI 22 - High viscosity index anti-wear hydraulic oils - 6037

 

The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards.


Application

Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. Applications include outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.

Hyspin HVI is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV

Hyspin HVI grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-S
Frank Mohn
Bosch Rexroth RE07075/RE90220


Advantages

  • High viscosity index and low pour point enables the product to be used over a wide temperature range, with good shear stability which means no excessive loss in viscosity due to mechanical shearing.
  • Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time due to unscheduled maintenance and savings from replacement part costs.
  • Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent thermal and oxidative stability provides reliable performance and extended oil life in severe applications. Minimal deposit formation gives a cleaner system and reduced frequency of filter changes.
  • Excellent filterability characteristics (including in the presence of water) enables cost savings to be made due to increased filter life.

 

ISO Viscosity and pack sizes available:
HYSPIN HVI 15 - 20L & 208L
HYSPIN HVI 22 - 20L & 208L
HYSPIN HVI 32 - 20L & 208L
HYSPIN HVI 46 - 20L & 208L
HYSPIN HVI 68 - 20L & 208L
HYSPIN HVI 100 - 20L

Discover More +
Houghton Houghto-Drive HM 22 - Hydraulic Oils - 46115

Houghton Houghto-Drive HM 22 - Hydraulic Oils - 46115

 

Houghto-Drive HM Hydraulic & Lubricating Oils incorporate lead-free and chlorine-free additives in high quality solvent refined base oils. Designed for the arduous requirements of high performance hydraulic systems, they are also suitable for machine tool lubrication, allowing product rationalisation.

 

Application:

  • Hydraulic systems requiring maximum antiwear protection.
  • High-speed machine tool spindles and gearboxes.

 

Advantages:

  • Enhanced equipment life
  • Lower power consumption
  • Multifunctionality aids inventory management
  • Reduced overall operating costs

 

Pack sizes available - 205ltr drums

Discover More +