Kernow Oils - Lubricant Solutions

High Performance

High Performance Products

Castrol Tribol 4747 / 220-2 - Synthetic high temperature grease - 4407

Castrol Tribol 4747 / 220-2 - Synthetic high temperature grease - 4407

 

CASTROL TRIBOL® 4747 high temperature grease with TGOA® is a clear multi-service lubricant designed to extend the service life of bearings in heavy-duty applications and at elevated temperatures. Because of the high base oil viscosity CASTROL TRIBOL® 4747 provides a heavier oil film for applications at slower speeds, higher loads and / or higher temperatures. The patented TGOA® additive technology under those adverse conditions provides for an unsurpassed protection against friction and wear. CASTROL TRIBOL® 4747 is formulated from a mixture of high-quality synthetic base oils (PAO & ester) and a lithium complex thickener, with corrosion inhibitors and antioxidants for long service life. The load carrying, antiwear and friction reducing capabilities of CASTROL TRIBOL® 4747 exceed conventional complex greases. High performance is the result of the TGOA® additives which, under relatively high specific loads and related temperatures, promote a non-destructive smoothing of the surface roughness in the micro-range. The smoothing effect leads to an increase of the actual load carrying area and reduces friction. TGOA® additives are very effective in protecting the machined surface of bearings during the critical “running-in” period. Good bearing surfaces are essential for long bearing life. If, because of shock loads or stop-and-go operation, surface roughness peaks redevelop, the TGOA® additive package is automatically reactivated. Surface roughness is again smoothed and lubrication optimised.

Available in: 18Kg tin, 10x400g cartridges

 

Application

CASTROL TRIBOL® 4747 grease with TGOA® is designed as a multi-service lubricant for heavy-duty applications of rolling and sliding bearings for temperatures up to 160°C (peak temperatures up to 180°C). CASTROL TRIBOL® 4747 grease should be used when loads are moderate to heavy and speeds are slow to moderate.

 

Conditions of Use

  • CASTROL TRIBOL® 4747 grease with TGOA® should not be mixed with greases using a different thickener.
  • Lubricating intervals should be increased gradually after changing over to CASTROL TRIBOL® 4747 to ensure complete removal of the previous lubricants and to use the TGOA® additives to their full advantage. Their performance might be affected by residual greases containing solid lubricants.
  • At peak temperatures of 180°C relubrication intervals should be established by inspection.

 

Advantages

  • CASTROL TRIBOL® 4747 with TGOA® offers increased load carrying capabilities due to higher viscosity base oils and surface smoothing as well as friction reducing properties of TGOA®.
  • The lithium complex thickener is characterised by its excellent working and shear stability.
  • Excellent thermal stability (dropping point >250°C).
  • The TGOA® additives ensure reduced wear, lowered operating temperatures as well as extended service life leading to decreased maintenance and repair costs.
Discover More +
Total Cortis SHT 200 - High temperature synthetic oil - 110524

Total Cortis SHT 200 - High temperature synthetic oil - 110524

 

Oils for moving parts operating at very high temperatures.

 

Applications:

  • CORTIS SHT is a synthetic oil that is particularly suitable for lubricating moving parts operating at very high temperatures.
  • Roller chains, conveyor rollers, and cams operating in furnaces and ovens.
  • Manufacture of glass containers: feeder and is machine mechanisms.
  • Chains and bars in continuous wood panel production machines.

 

Advantages:

  • Ensures continuous lubrication of mechanisms at temperatures up to 240°C.
  • Provides excellent protection for moving metal parts operating at high temperature: anti-wear properties enhanced for high temperatures.
  • No formation of hard, tough deposits, gum, or varnish at high temperature: outstanding thermal stability.
  • Ensures superbly clean lubrication circuits and lubricated parts: very good detergent properties when hot.
  • Very good anti-corrosion properties: protects metal parts.

 

Pack sizes available - 20L, 208L drums

Discover More +
Castrol Nucleol G110 - Radiation Resistant Grease - 2350

Castrol Nucleol G110 - Radiation Resistant Grease - 2350

 

Castrol Nucleol G110 is a radiation resistant bearing grease for general use in ball and roller bearings operating at moderate and high speeds and temperatures up to 150º, where the grease may be exposed to radiation doses of up to 10(to the power of 9) rads. Nucleol G110 is bases upon selected mineral base oils, with an inorganic thickener system giving outstanding thermal and radiation stability. Nucleol G110 comfortably exceed the UKAEA Schedule I requirements for radiation resistance and is fully approved for use within nuclear installations.

 

Advantages:

  • Stable at high temperatures
  • Long life at high temperature
  • Stable at high radiation doses
  • Long life at high radiation doses
  • Very low volatility

 

Pack sizes available - 3x3kg tins

Discover More +
Castrol Nucleol G121 - Radiation Resistant Grease - 2351

Castrol Nucleol G121 - Radiation Resistant Grease - 2351

 

Castrol Nucleol G121 is a radiation resistant grease based upon a high viscosity mineral oil with an inorganic thickener system, which gives outstanding thermal and radiation stability. Castrol Nucleol G121 also provides a high level of corrosion protection for components exposed to hostile environments.

 

Application

Due to the high viscosity of the base oil of Nucleol G121 it gives good performance in low speed bearings but is not suitable for use at moderate or high speeds. Nucleol G121 is ideally suited for the lubrication of control rod mechanisms. Nucleol G121 comfortably exceeds the UKAEA Schedule I requirements for radiation resistance and is fully approved for use within nuclear installations.

Nucleol G121 meets the Schedule I volatility limit of 4% after 400 hrs at 150ºC with CO2 flow of 1 litre/min.

 

Advantages:

  • Stable at high temperatures
  • Long life at high temperatures
  • Stable at high radiation doses
  • Long life at high radiation doses
  • Very low volatility
  • Provides maximum corrosion protection for equipment during storage and in humid conditions, such as those encountered during reactor commissioning

 

Pack sizes available - 12x500g

Discover More +
Castrol Nucleol G130 - Radiation Resistant Grease - 2352

Castrol Nucleol G130 - Radiation Resistant Grease - 2352

 

Castrol Nucleol G130 is a radiation resistant grease incorporating solid lubricants, for use as a gear grease or for slow speed, heavily loaded bearings. Nucleol G130 is based upon selected high viscosity mineral base oils with an inorganic thickener system which gives excellent thermal and radiation stability, allowing operation of temperatures up to 150ºC and radiation doses up to 10(to the power of 9) rads. Nucleol G130 also provides a high level of corrosion protection for components exposed to hostile environments, such as are encountered during reactor commissioning. Nucleol G130 comfortably exceeds the UKAEA Schedule I requirements for radiation resistance and is fully approved for use within nuclear installations.

Nucleol G130 meets the Schedule I volatility limit of 4% after 400 hrs at 150ºC with CO2 flow of 1 litre/min.

 

Advantages:

  • Stable at high temperatures
  • Long life at high temperatures
  • Stable at high radiation doses
  • Long life at high radiation doses
  • Very low volatility
  • Provides maximum corrosion protection
  • Protects equipment during storage and in humid conditions

 

Pack sizes available - 3x3kg tins

Discover More +
Castrol Tribol 3020/1000-2 - Fluid Greases with TGOA - 3432

Castrol Tribol 3020/1000-2 - Fluid Greases with TGOA - 3432

 

CASTROL TRIBOL™ 3020/1000 fluid greases with TGOA™ were designed for applications which require good pumpability of the lubricant and properties to withstand heavy loads. In gear units which are not sealed oil-tight and in large slow-speed bearings the CASTROL TRIBOL 3020/1000 greases provide for a sufficient lubricating film due to their high base oil viscosity. The TGOA additive package outperforms all other EP and antiwear additives because of its unique action on frictional surfaces.
CASTROL TRIBOL 3020/1000 have a lithium soap as thickener. The base oils are high-viscosity mineral oils forming a stable lubricant film to withstand high continuous loads, shock loads and vibrations. The TGOA additive package is activated by high specific loads and corresponding temperatures causing a chemical physical reaction. This results in an equalisation of surface roughness without creating abrasion. The results of the TGOA additives can be compared with a rolling process in the micro-range. The surface roughnesses are gradually leveled and smoothed. Through smoothing of the working surfaces, the loads are distributed over increasing areas and the actual load carrying areas are enlarged. During the running-in process, the TGOA additive package creates an optimum of smooth contact surfaces. If, because of shock loads, or stop-and-go operation, surface roughness peaks redevelop, the TGOA additives are automatically reactivated. Surface roughness is again equalized and lubrication optimised.
Corrosion and oxidation inhibitors maximise effective rust protection and long life of the grease.
CASTROL TRIBOL 3020/1000 meet NLGI consistency grades commonly available for these types of lubricants.

 

Application

Typical applications for CASTROL TRIBOL 3020/1000 fluid greases are non-oil-tight gear units, rolling and sliding bearings, bushings, slides and general lubrication designed for fluid-grease lubrication. Operating temperatures range from –40°C to +120°C.

 

Advantages

  • Excellent pumpability in central lubrication systems.
  • Repairing of damaged friction surfaces (roughness) due to the TGOA additives.
  • Extended lubrication interval.
  • Reduced wear and noise.
  • Lowering of the operating temperatures.
  • Low downtime thus reducing maintenance and repair costs.
  • Due to their excellent adhesion, these greases offer an optimum sealing effect.

 

Additional Information:

CASTROL TRIBOL 3020/1000 should not be mixed with greases using a different thickener.
CASTROL TRIBOL 3020/1000 greases exceed the minimum requirements for greases „G“ according to DIN51826.
Application may be made manually with grease guns or automatic dispensing systems, designed for the respective NLGI grades

 

Pack size available - 18kg can

Discover More +
Castrol Viscogen KL 3 - Synthetic chain lubricants - 3550

Castrol Viscogen KL 3 - Synthetic chain lubricants - 3550

 

Designed for high temp lubrication in severe environments where the use of mineral oils or conventional synthetic oils would result in excessive wear, carbonisation and residue formation. KL 3, 23 and 300 available in spray also.

Castrol Viscogen KL™ range are thermally stable synthetic lubricants designed for high temperature lubrication in severe environments, where the use of mineral oils or conventional synthetic oils would result in excessive wear, carbonisation and residue formation. They can be used up to temperatures of +200°C/+390°F, depending on the viscosity.
Viscogen KL have been developed from base fluids which form exceptionally adherent, transparent and odourless lubricating films and an additive system free of solids, metals or silicone which enhances load carrying capability and wear protection.

 

Application

Viscogen KL is available in 6 different viscosities depending on the ambient and operating conditions. The dimensions of the chain as well as its structural shape (e.g. roller, pin, ladder chains, insertion and flat link hoisting chains) are important when selecting the right viscosity. The way the lubricant is applied must also be considered e.g. manual lubrication, drip feed lubricator, central lubrication, sump lubrication or via spray can.
Viscogen KL finds use in many industrial applications, for example: High-rack storage shelves, bakery machines, paint lines, conveyor chains, tenter frames and dryers, washing plants, underfloor chains, steamers, slashers, baking ovens, slide ways, spindles, ropes, open gear wheels, plastic toothed belts and sheet-fed offset machines.
Viscogen KL 23 is especially suitable for use in BOPP (Biaxially oriented Polypropylene) film stretching machines.

 

Additional Information:

If lubricant drips off, select next higher viscosity.
Compatible and miscible with mineral oils.
Easy and economical use with adjustable spray head. Spraying foam remains until oil has penetrated into the friction point.

 

Pack sizes available - 20L

Discover More +
Castrol Viscogen KL 9 - Synthetic chain lubricants - 3551

Castrol Viscogen KL 9 - Synthetic chain lubricants - 3551

 

Designed for high temp lubrication in severe environments where the use of mineral oils or conventional synthetic oils would result in excessive wear, carbonisation and residue formation. KL 3, 23 and 300 available in spray also.

Castrol Viscogen KL™ range are thermally stable synthetic lubricants designed for high temperature lubrication in severe environments, where the use of mineral oils or conventional synthetic oils would result in excessive wear, carbonisation and residue formation. They can be used up to temperatures of +200°C/+390°F, depending on the viscosity.
Viscogen KL have been developed from base fluids which form exceptionally adherent, transparent and odourless lubricating films and an additive system free of solids, metals or silicone which enhances load carrying capability and wear protection.

 

Application

Viscogen KL is available in 6 different viscosities depending on the ambient and operating conditions. The dimensions of the chain as well as its structural shape (e.g. roller, pin, ladder chains, insertion and flat link hoisting chains) are important when selecting the right viscosity. The way the lubricant is applied must also be considered e.g. manual lubrication, drip feed lubricator, central lubrication, sump lubrication or via spray can.
Viscogen KL finds use in many industrial applications, for example: High-rack storage shelves, bakery machines, paint lines, conveyor chains, tenter frames and dryers, washing plants, underfloor chains, steamers, slashers, baking ovens, slide ways, spindles, ropes, open gear wheels, plastic toothed belts and sheet-fed offset machines.
Viscogen KL 23 is especially suitable for use in BOPP (Biaxially oriented Polypropylene) film stretching machines.

 

Additional Information:

If lubricant drips off, select next higher viscosity.
Compatible and miscible with mineral oils.
Easy and economical use with adjustable spray head. Spraying foam remains until oil has penetrated into the friction point.

 

Pack sizes available - 4.5kg can, 18kg can, 208L drum

Discover More +
Castrol Viscogen KL 15 - Synthetic chain lubricants - 3552

Castrol Viscogen KL 15 - Synthetic chain lubricants - 3552

 

Designed for high temp lubrication in severe environments where the use of mineral oils or conventional synthetic oils would result in excessive wear, carbonisation and residue formation. KL 3, 23 and 300 available in spray also.

Castrol Viscogen KL™ range are thermally stable synthetic lubricants designed for high temperature lubrication in severe environments, where the use of mineral oils or conventional synthetic oils would result in excessive wear, carbonisation and residue formation. They can be used up to temperatures of +200°C/+390°F, depending on the viscosity.
Viscogen KL have been developed from base fluids which form exceptionally adherent, transparent and odourless lubricating films and an additive system free of solids, metals or silicone which enhances load carrying capability and wear protection.

 

Application

Viscogen KL is available in 6 different viscosities depending on the ambient and operating conditions. The dimensions of the chain as well as its structural shape (e.g. roller, pin, ladder chains, insertion and flat link hoisting chains) are important when selecting the right viscosity. The way the lubricant is applied must also be considered e.g. manual lubrication, drip feed lubricator, central lubrication, sump lubrication or via spray can.
Viscogen KL finds use in many industrial applications, for example: High-rack storage shelves, bakery machines, paint lines, conveyor chains, tenter frames and dryers, washing plants, underfloor chains, steamers, slashers, baking ovens, slide ways, spindles, ropes, open gear wheels, plastic toothed belts and sheet-fed offset machines.
Viscogen KL 23 is especially suitable for use in BOPP (Biaxially oriented Polypropylene) film stretching machines.

 

Additional Information:

If lubricant drips off, select next higher viscosity.
Compatible and miscible with mineral oils.
Easy and economical use with adjustable spray head. Spraying foam remains until oil has penetrated into the friction point.

 

Pack sizes available - 5L, 20L

Discover More +
Castrol Viscogen KL 23 - Synthetic chain lubricants - 3553

Castrol Viscogen KL 23 - Synthetic chain lubricants - 3553

 

Designed for high temp lubrication in severe environments where the use of mineral oils or conventional synthetic oils would result in excessive wear, carbonisation and residue formation. KL 3, 23 and 300 available in spray also.

Castrol Viscogen KL™ range are thermally stable synthetic lubricants designed for high temperature lubrication in severe environments, where the use of mineral oils or conventional synthetic oils would result in excessive wear, carbonisation and residue formation. They can be used up to temperatures of +200°C/+390°F, depending on the viscosity.
Viscogen KL have been developed from base fluids which form exceptionally adherent, transparent and odourless lubricating films and an additive system free of solids, metals or silicone which enhances load carrying capability and wear protection.

 

Application

Viscogen KL is available in 6 different viscosities depending on the ambient and operating conditions. The dimensions of the chain as well as its structural shape (e.g. roller, pin, ladder chains, insertion and flat link hoisting chains) are important when selecting the right viscosity. The way the lubricant is applied must also be considered e.g. manual lubrication, drip feed lubricator, central lubrication, sump lubrication or via spray can.
Viscogen KL finds use in many industrial applications, for example: High-rack storage shelves, bakery machines, paint lines, conveyor chains, tenter frames and dryers, washing plants, underfloor chains, steamers, slashers, baking ovens, slide ways, spindles, ropes, open gear wheels, plastic toothed belts and sheet-fed offset machines.
Viscogen KL 23 is especially suitable for use in BOPP (Biaxially oriented Polypropylene) film stretching machines.

 

Additional Information:

If lubricant drips off, select next higher viscosity.
Compatible and miscible with mineral oils.
Easy and economical use with adjustable spray head. Spraying foam remains until oil has penetrated into the friction point.

 

Pack sizes available - 5L, 20L, 208L drum

Discover More +