Castrol Optitemp HT 2 EP - High-temperature Greases for Long-term Lubrication -

Castrol Optitemp HT 2 EP - High-temperature Greases for Long-term Lubrication -

Castrol Optitemp HT 2 EP - High-temperature Greases for Long-term Lubrication - 3722

 

Castrol OPTITEMP™ HT 2 and HT 2 EP are high performance greases for long-term lubrication of rolling and sliding bearings at high operating temperatures as well as at normal or medium bearing pressures. OPTITEMP HT 2 is light coloured. OPTITEMP HT 2 EP has a dark colour due to the molybdenum disulphide contained in it. It features an even higher load bearing capacity and good emergency running properties.

 

Application

  • For thermally loaded rolling and sliding bearings such as fan bearings in the textile, wood, plastics and food industries as well as in stove furnaces of the automotive industry.
  • For steam-heated calender or drying cylinder bearings.
  • As sealing grease for labyrinth seals at high temperatures.
  • For the application in slightly acidic or alkaline atmospheres.
  • OPTITEMP HT 2 EP is especially suited for friction points subjected to increased loads or when special emergency running properties are required.

 

 

User benefits include:

  • OPTITEC® - OPTIMOL technology.
  • Optimum wear protection in the high load range.
  • Extremely good load bearing capacity.
  • Especially ageing and temperature-resistant.
  • Structurally stable.
  • Resistant to cold and hot water, limited resistance to alkalis and acids.
  • Excellent corrosion protection.
  • Pumpable in central lubrication systems.
  • Temperature application range: - 20°C/- 4°F to + 160°C/+ 320°F. In case of life-lubricated bearings the temperature of + 150°C/+ 302°F under normal conditions should not be exceeded. Short-term operation at higher temperatures is possible - please consult Castrol's Technical Service.

 

Additional Information:

  • Please follow the bearing manufacturer's specifications.
  • Do not mix OPTITEMP HT 2 and HT 2 EP with other lubricating greases. In case of doubt please consult the Technical Service.
  • Thoroughly clean bearings before introducing the initial fill.
  • Fill bearing housing only about half-full with OPTITEMP HT 2 or HT 2 EP

 

ISO Viscosity Grades and pack sizes available

20x400gC'tridge & 18kg can     

Contact Us 01736 757002

Enquiry Form

 
Title:
First name:  
Surname:  
Company:
Town/City:
Country:
Email address:   
Telephone test:
Telephone:
Estimated annual volume:
Product Sector:
Details of further info needed:  
   IF YOU CONSENT TO RECEIVING EMAILS DETAILING
FURTHER SERVICES OR OFFERS PLEASE TICK THIS BOX