Kernow Oils - Lubricant Solutions

Gear Oils

BP Energol GR-XP 220 - Premium Industrial Gear Oil

BP Energol GR-XP 220 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
BP Energol GR-XP 320 - Premium Industrial Gear Oil

BP Energol GR-XP 320 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
BP Energol GR-XP 68 - Premium Industrial Gear Oil

BP Energol GR-XP 68 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
BP Energol GR-XP 150 - Premium Industrial Gear Oil

BP Energol GR-XP 150 - Premium Industrial Gear Oil

 

Description
A range of high-quality, lead-free EP oils having outstanding thermal stability and high load-carrying capacity.
The formulation provides excellent corrosion-protection, anti-foam characteristics, demulsibility and oxidation-resistance.
Very good viscosity characteristics ensure that starting torques are not excessive in cold conditions.
The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units. The EP properties are provided by a sulphur-phosphorus additive

 

Applications
These oils are formulated for the circulatory and bath lubrication of spur, helical and worm-type industrial gears.
If you have any questions about compatibility then just give us a call and we will double check for you.
The Energol GR-XP oils meet the performance requirements of DIN 51 517 Part 3, AGMA 250.04 and US Steel 224.
They are approved by

  • David Brown Industries Ltd
  • PIV
  • Sew Usocome

Oil temperatures should not exceed 120 °C. In any system that incorporates electric heaters for effecting rapid warm-up, it is important to avoid high rates of heat input. Heat fluxes in excess of 15 kW/m2 (9.5 W/in2) are likely to cause separation of additives, and this would affect the oil's lubrication performance.

 

Main Benefits

  • Attention-free operation between standard overhauls even at elevated temperatures and in adverse conditions.
  • Maximum protection against corrosion and wear.
Discover More +
BP Energol GR-XP 100 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 100 - Industrial Extreme Pressure Gear Oil

 

Description

The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
BP Energol GR-XP 460 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 460 - Industrial Extreme Pressure Gear Oil

 

Description
The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving
demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
BP Energol GR-XP 680 - Industrial Extreme Pressure Gear Oil

BP Energol GR-XP 680 - Industrial Extreme Pressure Gear Oil

 

Description
The BP Energol™ GR-XP gear oil range of high quality lubricants are based upon highly refined mineral oil, enhanced with sulphur/phosphorus extreme pressure additive technology providing outstanding thermal stability and high load carrying capacity.
The advanced extreme pressure additive system not only provides high load carrying capacity, but was designed to provide microscopic wear protection. Microscopic wear protection, also known as micropitting protection, is critical in preventing destructive wear at the micro level therefore extending gear life and meeting the evolving
demands of smaller and higher output gear boxes.

 

Application
The Energol GR-XP range is recommended for the lubrication of industrial gearboxes using forced circulation or splash and oil bath lubrication. They may be used for the lubrication of spur and helical gears and in some lightly loaded worm type gear applications.
They have very good viscosity characteristics to ensure that starting torques are not excessively high in cold operating conditions. The additives are compatible with the ferrous and non-ferrous metals used in industrial gear units.
The Energol GR-XP range is fully compatible with nitrile, silicone and fluropolymer seal materials.
Energol GR-XP is classified as follows:

  • DIN Classification is CLP
  • Energol GR-XP grades meet the requirements of:
  • DIN 51517 Part 3
  • AGMA 9005 - D94
  • US Steel 224
  • David Brown Type E
  • Hansen Transmissions
  • Flender

 

Advantages

  • ‘Clean gear’ additive technology ensures low deposit formation and enhanced filter life.
  • Full Extreme Pressure (EP) performance* gives maximum protection of gears against wear and shock-loading.
  • Good water separation and demulsification characteristics means reduced down time through prolonged lubricant life and increased equipment reliability.
  • Excellent protection against corrosion and wear results in less maintenance.
  • Suitable for Müller Weingarten equipment
  • ISO 220 grade achieved FZG >14 rating under A16.6/90 (double speed) test conditions
Discover More +
Total Carter EP 100 - Mineral oils for enclosed gears - 110483

Total Carter EP 100 - Mineral oils for enclosed gears - 110483

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Carter EP 150 - Mineral oils for enclosed gears - 110486

Total Carter EP 150 - Mineral oils for enclosed gears - 110486

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +
Total Carter EP 220 - Mineral oils for enclosed gears - 110489

Total Carter EP 220 - Mineral oils for enclosed gears - 110489

 

Applications:

CARTER EP has been specially designed for lubricating enclosed gears operating under severe conditions:
- level and spur gears
- bearings and gear couplings
- worm gears.

 

Specifications:

  • DIN 51517 Part 3 ⇒ group CLP
  • ISO 12925-1 CKD
  • AGMA 9005 - D94 EP

Manufacturers approvals - CINCINNATI MILACRON, DAVID BROWN, AISI 224, SEB 181226, FLENDER

 

Advantages:

  • Excellent extreme-pressure and anti-wear properties.
  • Good seal compatibility.
  • Very good resistance to oil oxidation and degradation.
  • Oustanding protection to rust and corrosion of copper alloys.
  • Very good resistance to foaming and emulsion formation.

 

Pack sizes available - 20L, 208L drums, 1000L IBC, Bulk delivery

Discover More +