Kernow Oils - Lubricant Solutions

Food Grade Oils

Food Grade Oils

Castrol Optileb GT 220 - Synthetic NSF H1 gear lubricant - 3596

Castrol Optileb GT 220 - Synthetic NSF H1 gear lubricant - 3596

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:
Please observe the viscosity guidelines specified by the manufacturer.
Good compatibility with conventional sealing materials.
As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 20ltr

Discover More +
Castrol Optileb GT 460 - Synthetic NSF H1 gear lubricant - 3598

Castrol Optileb GT 460 - Synthetic NSF H1 gear lubricant - 3598

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:
Please observe the viscosity guidelines specified by the manufacturer.
Good compatibility with conventional sealing materials.
As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 20ltr

Discover More +
Castrol Optileb HY 68 - Food Grade Hydraulic Oils - 3600

Castrol Optileb HY 68 - Food Grade Hydraulic Oils - 3600

 

Castrol Optileb HY 68 is primarily designed as a non-toxic hydraulic fluid, manufactured solely from FDA (United States Food and Drugs Administration) listed ingredients for use within the food processing industry, particularly where incidental contact with foodstuffs may occur. Optileb HY 68 is USDA H1 / NSF Approved certificate no. 134153.

 

Application

Castrol Optileb HY grades have excellent anti-wear performance and can be used in hydraulic systems with all types of pumps and motors at their rated speeds and pressures. They are extremely resistant to water wash and offer excellent corrosion protection, making them also suitable for use as a light lubricating oil in wet environments or in applications where equipment is frequently washed down. It is recommended that systems being converted to Optileb HY grades are thoroughly drained and flushed before filling to prevent contamination with previous hydraulic fluid.

 

 

User benefits include:

  • Contain only FDA listed raw materials
  • Authorised by USDA for Category H1 service
  • Non staining, Non toxic
  • Food grade lubricant
  • Excellent anti-wear performance
  • Minimising component wear, giving long term reliability of pumps and motors
  • Extremely water resistant
  • Gives excellent corrosion protection

 

Pack sizes available - 20ltr, 208ltr barrel

Discover More +
Total Nevastane SL 32 - Compressors, pneumatic and hydraulic oils - 127413

Total Nevastane SL 32 - Compressors, pneumatic and hydraulic oils - 127413

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane SL 320 - Synthetic (PAO) gear oils - 127416

Total Nevastane SL 320 - Synthetic (PAO) gear oils, suitable for incidental food contact. - 127416

 

Applications:

  • Nevastane SL oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.
  • Nevastane SL 150 to 460 oils are also suitable for the lubrication of numerous applicacations in the food industry such as chains and conveyor belts.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

             - Nevastane SL 150: No 125584 Nevastane SL 220: No 125585
             - Nevastane SL 320: No 125578 Nevastane SL 460: No 125579

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane SFG 2 - High performance synthetic grease - 127430

Total Nevastane SFG 2 - High performance synthetic grease, suitable for incidental food contact. - 127430

 

Applications:

  • Nevastane SFG greases are high performance Extreme Pressure food grade lubricants based on calcium sulfonate complex soap, synthetic base oil and selected additives.
  • Nevastane SFG greases are suitable for the lubrication of numerous applications in the food processing industries operating at low or high temperatures (-40°C to +180°C) and in presence of water: bearings, sterilizers, freezing tunnels, bearings in ovens…

 

 

Specifications: 

  • The formulation of Nevastane SFG greases complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SFG greases are NSF H1 registered:

               - Nevastane SFG 1: No 125627
               - Nevastane SFG 2: No 125626

  • Nevastane SFG greases are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SFG greases are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Very wide temperature range.
  • Excellent EP performance and resistance to water.
  • Significant extension of lubrication intervals.

 

Pack sizes available - 20x400g, 37lbs

Discover More +
Total Nevastane SL 46 - Compressors, pneumatic and hydraulic oils - 127544

Total Nevastane SL 46 - Compressors, pneumatic and hydraulic oils - 127544

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane SL 100 - Compressors, pneumatic and hydraulic oils - 127557

Total Nevastane SL 100 - Compressors, pneumatic and hydraulic oils - 127557

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane SL 150 - Synthetic (PAO) gear oils - 127558

Total Nevastane SL 150 - Synthetic (PAO) gear oils, suitable for incidental food contact. - 127558

 

Applications:

  • Nevastane SL oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.
  • Nevastane SL 150 to 460 oils are also suitable for the lubrication of numerous applicacations in the food industry such as chains and conveyor belts.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

             - Nevastane SL 150: No 125584 Nevastane SL 220: No 125585
             - Nevastane SL 320: No 125578 Nevastane SL 460: No 125579

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane SL 460 - Synthetic (PAO) gear oils - 127573

Total Nevastane SL 460 - Synthetic (PAO) gear oils, suitable for incidental food contact. - 127573

 

Applications:

  • Nevastane SL oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.
  • Nevastane SL 150 to 460 oils are also suitable for the lubrication of numerous applicacations in the food industry such as chains and conveyor belts.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

             - Nevastane SL 150: No 125584 Nevastane SL 220: No 125585
             - Nevastane SL 320: No 125578 Nevastane SL 460: No 125579

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +