Kernow Oils - Lubricant Solutions

Filter Your Results...

By Viscosity...
By Brand...

Corrosion Preventatives

Corrosion Preventatives

Houghton Rust-Veto FPN2 - Low viscosity mineral oil based rust preventive - 6721

Houghton Rust-Veto FPN2 - Low viscosity mineral oil based rust preventive for indoor protection - 67210

 

Rust-Veto FPN2 is a low viscosity mineral oil based rust preventive formulated from carefully selected solvent refined base oils and incorporating special corrosion inhibiting additives to give long term protection to ferrous and nonferrous metals.

 

Application:

Rust-Veto FPN2 is designed for applications requiring up to twelve months indoor storage. Its fingerprint neutralising characteristics make it ideally suited for the protection of precision components with highly finished surfaces. Rust-Veto FPN2 can be applied by brushing, dipping or spraying.

 

Advantages:

  • Fingerprint neutralising characteristics.
  • High flash point.
  • Does not contain solvents.
  • Minimises fire hazards and eliminates the need for costly extraction systems for solvent vapours.
  • Twelve month's protection during indoor storage.
  • Readily applied.
  • Easily removed by solvents or alkaline cleaners.

 

Pack sizes available - 205ltr drum

Discover More +
Houghton Rust-Veto 100D - Dewatering rust preventative - 67400

Houghton Rust-Veto 100D - Dewatering rust preventative - 67400

 

Rust-Veto 100D is a light mineral oil based rust preventative formulated from carefully selected low viscosity solvent refined base oils and incorporating effective corrosion inhibitors and dewatering additives.

 

Application:

Rust-Veto 100D has excellent water displacing characteristics and is designed for dewatering applications where the use of solvent based products is excluded. The thin oily film left by Rust-Veto 100D will provide six to nine months’ protection for ferrous and non ferrous components during indoor storage. Increased protection will be obtained if components or steel stock are wrapped after treatment.

Typical applications include:

  • The protection of steel tubes after pickling and washing processes.
  • Dewatering applications in areas where the use of flammable solvent is prohibited

 

Advantages:

  • Excellent dewatering characteristics
  • Does not contain solvents
  • Minimises fire hazards and eliminates the need for costly extraction systems for solvent vapours
  • Six to nine months’ protection during indoor storage
  • Rapid draining from work
  • Good penetration into coiled stock
  • Transparent, oily film
  • Bright ground surfaces show through the film
  • Readily applied
  • Easily removed by solvents or alkaline cleaners
Discover More +
Houghton Rust-Veto 110D - Mineral oil based rust preventive - 67410

Houghton Rust-Veto 110D - Mineral oil based rust preventive - 67410

 

Rust-Veto 110D is a light mineral oil based rust preventive formulated from carefully selected low viscosity solvent refined base oils and incorporating a vapour phase corrosion inhibitor.

 

Application:

Rust-Veto 110D can be applied by brushing, dipping or spraying. Typical applications include the final protection of ball and roller bearings and protection of precision components. Rust-Veto 110D provides protection of ferrous and non ferrous components during indoor storage and covered transit. The thin oily film left by Rust-Veto 110D will provide up to twelve months protection during indoor storage. Rust-Veto 110D has excellent water displacing characteristics making it ideally suited for dewatering applications where the use of solvent based products is excluded. Rust-Veto 110D is specifically designed for applications requiring vapour phase inhibition. Due to its vapour phase inhibition several years’ protection will be obtained if components are wrapped in hermetically sealed packaging after treatment.

 

Advantages:

  • Vapour phase inhibition.
  • Does not contain solvents.
  • High flash point.
  • Minimises fire hazards and eliminates the need for costly extraction systems for solvent vapours.
  • Readily applied.
  • Twelve months’ protection during indoor storage.
  • Rapid draining from work.
  • Compatible with lubricants.
  • Easily removed by solvents or alkaline cleaners.

 

Pack sizes available - 25ltr

Discover More +
Houghton Rust-Veto 120D - Dewatering rust preventative - 67420

Houghton Rust-Veto 120D - Dewatering rust preventative - 67420

 

Rust-Veto 120D is a medium viscosity oil based rust preventive formulated from carefully selected low viscosity solvent refined base oils and incorporating effective corrosion inhibitors and dewatering additives.

 

Application:

Rust-Veto 120D has excellent water displacing characteristics and is designed for applications where the use of solvent based products is excluded. The oily film left by Rust-Veto 120D will provide up to eighteen months’ protection for ferrous and non ferrous components during indoor storage. Increased protection will be obtained if components or steel stock are wrapped after treatment.

 

Advantages:

  • Excellent dewatering characteristics
  • Does not contain solvents
  • Minimises fire hazards and eliminates the need for costly extraction systems for solvent vapours
  • Eighteen months’ protection during indoor storage
  • Rapid draining from work
  • Transparent, oily film
  • Bright ground surfaces show through the film
  • Readily applied
  • Easily removed by solvents or alkaline cleaners
Discover More +
Houghton Rust-Veto NTP32 - Hydraulic system testing and preservation fluid - 678

Houghton Rust-Veto NTP32 - Hydraulic system testing and preservation fluid - 67825

 

Specifically designed for testing and preservation of hydraulic systems.

Rust-Veto NTP32 is a dual purpose fluid designed for the commissioning and subsequent preservation of both water glycol and mineral oil based hydraulic systems. A mineral oil based product, it possesses all the qualities of premium antiwear hydraulic oil, with enhanced corrosion inhibition and specially developed glycol miscibility.

 

Advantages:

  • ISO 32 viscosity classification.
  • Anti-wear characteristics enabling commissioning of hydraulic equipment.
  • Long term corrosion protection.
  • Resistant to salt water ingress.
  • Fully compatible with mineral oil hydraulic fluids.
  • Readily flushed out with water glycol hydraulic fluids–residues are emulsified and not detrimental to performance.
  • Specifically developed for use with 0X-40 water glycol systems.

 

Pack sizes available - 25ltr

Discover More +
Houghton Rust-Veto 303 - Aqueous rust preventative - 68303

Houghton Rust-Veto 303 - Advanced aqueous rust preventative concentrate- 68303

 

Rust-Veto 303 is an advanced aqueous rust preventive designed to provide inter-operational/ short-term corrosion protection for ferrous materials. It contains a high visibility dye to facilitate identification during leak and crack detection applications.

 

Application:

Rust-Veto 303 is generally used at a concentration between 1.5% and 10% for a variety of applications including:
  • Hydrostatic pressure testing of pumps, manifolds, radiators and pressure vessels
  • Leak and crack detection for castings and general assemblies
  • Inter-operational and general purpose short-term (up to 3 months) indoor rust prevention.

Rust-Veto 303 is compatible with copper based alloys and has a minimal effect on aluminium alloys.

 

Advantages:

  • Excellent corrosion protection
  • Low foaming
  • Good stability in hard water
  • High visibility of leaks
  • Freedom from crystalline residues
Discover More +
Houghton Rust-Veto 310 - Dilutable rust preventative - 68310

Houghton Rust-Veto 310 - Multi-purpose water-dilutable rust preventative concentrate - 68310

 

Rust-Veto 310 is a multi-purpose rust preventive used either neat or mixed with water to provide a wide range of rust preventive requirements. Rust-Veto 310 contains rust inhibiting additives and emulsifiers which when mixed with water provides a versatile non-flammable emulsion. Rust-Veto 310 emulsions eliminate fire hazards and improve plant safety and environmental conditions by replacing solvent based rust preventives in many applications.

 

Application:

Rust-Veto 310 is generally mixed with water at concentrations ranging from 5% to 25% depending upon the specific application. The thin oily film provided by Rust-Veto 310 emulsions provides excellent corrosion protection during indoor storage but can also be used neat to give extended corrosion protection. Applications include dewatering, inter-operational protection and final protection of finished parts during indoor storage, packing and shipment.

15% to 25% emulsions provide an alternative to conventional solvent or mineral oil based products.

10% to 15% emulsions can be used for the protection of steel strip after pickling or as a final pass for rolling sheet steel.

5% to 10% emulsions are suitable for use as the final rinse stage in chemical treatment or cleaning operations to provide short-term protection.

 

Advantages:

  • Free from VOC’S
  • Non-flammable emulsions eliminate fire hazards
  • Solvent free replacement improves plant safety.
  • Economical in use 
  • Extremely versatile in application
  • Short-term inter-operational protection up to long-term indoor protection 
  • Resistant to microbial attack
  • Possesses water displacing characteristics
  • Thin oily film
  • Readily applied
  • Easily removed by solvents or alkaline cleaners
Discover More +
Houghton Rust-Veto 310-20 - Rust preventative - 68315

Houghton Rust-Veto 310-20 - Rust preventative - 68315

 

Rust-Veto 310-20 is a ready to use corrosion preventative emulsion containing solvent refined mineral oils, carefully selected rust inhibiting additives and emulsifiers. It is designed specifically to improve plant safety and operator comfort in applications where the use of solvent based products could be hazardous or unpleasant.

 

Application:

Inter-operational and final protection of components during indoor storage e.g. press dies, pickled steel strip, tubes, chromium plated parts, bearings, pumps, etc.

 

Advantages:

  • Non-flammable emulsions eliminate fire hazards
  • Free from VOC’s
  • Improves operator and plant safety by replacing solvent based rust preventives
  • Economical in use
  • Long term indoor corrosion protection
  • Possesses water displacing characteristics
  • Thin oily film
  • Readily applied
  • Easily removed by solvents or alkaline cleaners
Discover More +
Houghton Rust-Veto TB - Rust preventative - 68400

Houghton Rust-Veto TB - Rust preventative - 68400

Emulsifiable oil concentrate providing blackening and rust prevention after tempering.

 

Rust–Veto TB is a concentrated water soluble oil which will provide a stable emulsion even when diluted in high hardness water. 

Upon evaporation of the water Rust–Veto TB imparts a thin oily film on treated components to provide temporary corrosion protection. The length of protection is dependent upon the concentration used however up to 8 months protection can be attained in indoor storage conditions. 

Rust–Veto TB finds particular application for cooling steel components directly after tempering leaving an aesthetic black coloration together with temporary corrosion protection..

 

Application:

Although Rust–Veto TB is typically used as a 10% emulsion and at a temperature of up to 70ºC a concentration range of between 5% and 20% can be considered depending upon the specific application.

Rust–Veto TB emulsions have excellent thermal stability and find extensive application for the treatment of fasteners following tempering at temperatures of between 500ºC and 600ºC.

Rust–Veto TB is an excellent indoor rust preventiveespecially suitable following surface treatments eg. blackening, phosphating etc. and for inter-operational protection of components between manufacturing processes Being water based Rust–Veto TB is a safer alternative to solvent based rust preventives and offers economic benefits to costly neat solvent based dewatering agents.

 

Advantages:

  • Excellent rust prevention
  • Deep black coating
  • Stable in hard water
Discover More +
Houghton Ensis DW 1255 - Rust Preventative - 69204

Houghton Ensis DW 1255 - Medium term rust preventive with dewatering properties - 69204

 

Ensis DW 1255 is a medium term rust protective suitable for metal surfaces likely to corrode in storage or use. Ensis DW 1255 is a water-displacing, solvent based rust inhibitor that leaves a temporary waxy protective film on metal surfaces. The product protects metal parts from the damaging effects of moisture, air, detergents and other contaminants. Major advantages are the excellent de-emulsification properties and the fast drying time.

 

Applications:

Ensis DW 1255 can be applied by dipping or spraying. After the evaporation of the solvent Ensis DW 1255 leaves a waxy film on surfaces. Ensis DW 1255 is easily removed with aqueous alkaline cleaners or solvents. It is a premium quality dewatering type rust preventive with good coverage. Effective in neutralizing finger prints. It resists cracking & peeling. Use Ensis DW 6055 where excellent covering capacity and excellent medium term protection is required. Ensis DW 1255 is used neat as supplied.

Indoor protection 12 months.
Outdoor (under roof) 3 months.
Easily removed with alkaline or solvent based cleaners.

 

Advantages:

  • Excellent de-emulsification properties.
  • Fast drying time.

 

Pack sizes available - 20ltr, 203ltr drum, 1000ltr IBC

Discover More +