Kernow Oils - Lubricant Solutions

Oils

Total Finavestan A 80 B - Medicinal White Oils - 110318

Total Finavestan A 80 B - Medicinal White Oils - 110318

 

Applications:

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:

  • Polymer: plasticizer & external lubricant for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
  • Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
  • Paper: cut and slit lubricant.
  • Dust binder, defoamer, furniture polishes.

 

The application is subject to the applicable laws and regulations in each country.

  • CAS number: 8042-47-5
  • EINECS number: 232-455-8
  • INCI number (EU): Paraffinum Liquidum

 

Specifications:

 

FINAVESTAN white oils meet the requirements of the following specifications:

  • European Pharmacopoeia, most recent edition.
  • US Pharmacopoeia, most recent edition.
  • US FDA, 21 CFR 178.3620(a), White Mineral Oil.
  • European Regulation 2011/10/CE relating to plastic materials and articles intended to come into contact with foodstuffs.
  • FINAVESTAN white oils are NSF H1 registered, suitable for incidental food contact.

 

Advantages:

  • FINAVESTAN white oils are obtained from petroleum through several important refining stages that guaranty their extremely high purity.
  • FINAVESTAN are transparent and colorless oils. They are also odourless and tasteless.
  • As medicinal grades, FINAVESTAN white oils meet the requirements of the cosmetic, pharmaceutical and food-related industry subject to the regulations in each country.

 

Pack sizes available - 20L, 208L drums, 1000L IBC

Discover More +
Total Finavestan A 180 B - Medicinal White Oils - 111564

Total Finavestan A 180 B - Medicinal White Oils - 111564

 

Applications:

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:
  • Polymer: plasticizer & external lubricant for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
  • Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
  • Paper: cut and slit lubricant.
  • Dust binder, defoamer, furniture polishes.
The application is subject to the applicable laws and regulations in each country.
  • CAS number: 8042-47-5
  • EINECS number: 232-455-8
  • INCI number (EU): Paraffinum Liquidum

 

Specifications:

 

FINAVESTAN white oils meet the requirements of the following specifications:
  • European Pharmacopoeia, most recent edition
  • US Pharmacopoeia, most recent edition
  • US FDA, 21 CFR 178.3620(a), White Mineral Oil
  • European Regulation 2011/10/CE relating to plastic materials and articles intended to come into contact with foodstuffs.
  • FINAVESTAN white oils are NSF H1 registered, suitable for incidental food contact.

 

Advantages:

  • FINAVESTAN white oils are obtained from petroleum through several important refining stages that guaranty their extremely high purity.
  • FINAVESTAN are transparent and colourless oils. They are also odourless and tasteless.
  • As medicinal grades, FINAVESTAN white oils meet the requirements of the cosmetic, pharmaceutical and food-related industry subject to the regulations in each country.

 

Pack sizes available - 208L drums

Discover More +
Total Finavestan A 100 B - Medicinal White Oils. - 112412

Total Finavestan A 100 B - Medicinal White Oils - 112412

 

Applications:

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:
  • Polymer: plasticizer & external lubricant for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
  • Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
  • Paper: cut and slit lubricant.
  • Dust binder, defoamer, furniture polishes.
The application is subject to the applicable laws and regulations in each country.
  • CAS number: 8042-47-5
  • EINECS number: 232-455-8
  • INCI number (EU): Paraffinum Liquidum

 

Specifications:

 

FINAVESTAN white oils meet the requirements of the following specifications:
  • European Pharmacopoeia, most recent edition
  • US Pharmacopoeia, most recent edition
  • US FDA, 21 CFR 178.3620(a), White Mineral Oil
  • European Regulation 2011/10/CE relating to plastic materials and articles intended to come into contact with foodstuffs.
  • FINAVESTAN white oils are NSF H1 registered, suitable for incidental food contact.

Advantages:

  • FINAVESTAN white oils are obtained from petroleum through several important refining stages that guarantee their extremely high purity.
  • FINAVESTAN are transparent and colourless oils. They are also odourless and tasteless.
  • As medicinal grades, FINAVESTAN white oils meet the requirements of the cosmetic, pharmaceutical and food-related industry subject to the regulations in each country.

 

Pack sizes available - 20L, 208L drums

Discover More +
Total Finavestan A 210 B - Medicinal White Oils - 112414

Total Finavestan A 210 B - Medicinal White Oils - 112414

 

Applications:

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:
  • Polymer: plasticizer & external lubricant for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
  • Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
  • Paper: cut and slit lubricant.
  • Dust binder, defoamer, furniture polishes.
The application is subject to the applicable laws and regulations in each country.
  • CAS number: 8042-47-5
  • EINECS number: 232-455-8
  • INCI number (EU): Paraffinum Liquidum

 

Specifications:

 

FINAVESTAN white oils meet the requirements of the following specifications:
  • European Pharmacopoeia, most recent edition
  • US Pharmacopoeia, most recent edition
  • US FDA, 21 CFR 178.3620(a), White Mineral Oil
  • European Regulation 2011/10/CE relating to plastic materials and articles intended to come into contact with foodstuffs.
  • FINAVESTAN white oils are NSF H1 registered, suitable for incidental food contact.

 

Advantages:

  • FINAVESTAN white oils are obtained from petroleum through several important refining stages that guaranty their extremely high purity.
  • FINAVESTAN are transparent and colourless oils. They are also odourless and tasteless.
  • As medicinal grades, FINAVESTAN white oils meet the requirements of the cosmetic, pharmaceutical and food-related industry subject to the regulations in each country.

 

Pack sizes available - 208L drums

Discover More +
Total Nevastane AW 22 - Food industry - 127540

Total Nevastane AW 22 - Food industry - 127540

 

Hydraulic oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or air-line lubricators in the food processing industries.
  • NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

 

Specifications:

  • The formulation of NEVASTANE AW oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE AW oils are NSF H1 registered:
  1. NEVASTANE AW 22: No 123142
  2. NEVASTANE AW 32: No 123522
  3. NEVASTANE AW 46: No 123144
  4. NEVASTANE AW 68: No 123525
  • NEVASTANE AW oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HM.
  • NEVASTANE AW oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Excellent anti-wear and corrosion protection.
  • Miscible with mineral fluids.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane AW 32 - Food industry - 127541

Total Nevastane AW 32 - Food industry - 127541

 

Hydraulic oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or air-line lubricators in the food processing industries.
  • NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

 

Specifications:

  • The formulation of NEVASTANE AW oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE AW oils are NSF H1 registered:
  1. NEVASTANE AW 22: No 123142
  2. NEVASTANE AW 32: No 123522
  3. NEVASTANE AW 46: No 123144
  4. NEVASTANE AW 68: No 123525
  • NEVASTANE AW oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HM.
  • NEVASTANE AW oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Excellent anti-wear and corrosion protection.
  • Miscible with mineral fluids.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane AW 46 - Food industry - 127552

Total Nevastane AW 46 - Food industry - 127552

 

Hydraulic oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or air-line lubricators in the food processing industries.
  • NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

 

Specifications:

  • The formulation of NEVASTANE AW oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE AW oils are NSF H1 registered:
  1. NEVASTANE AW 22: No 123142
  2. NEVASTANE AW 32: No 123522
  3. NEVASTANE AW 46: No 123144
  4. NEVASTANE AW 68: No 123525
  • NEVASTANE AW oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HM.
  • NEVASTANE AW oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Excellent anti-wear and corrosion protection.
  • Miscible with mineral fluids.

 

Pack sizes available - 5 US Gallons, 1000L IBC

Discover More +
Total Nevastane AW 68 - Food industry - 127553

Total Nevastane AW 68 - Food industry - 127553

 

Hydraulic oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE AW oils are recommended for any high pressure hydraulic system and/or air-line lubricators in the food processing industries.
  • NEVASTANE AW formulation is based on white mineral oil and high performance additives provides excellent protection of the equipment even at high temperatures.

 

Specifications:

  • The formulation of NEVASTANE AW oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE AW oils are NSF H1 registered:
  1. NEVASTANE AW 22: No 123142
  2. NEVASTANE AW 32: No 123522
  3. NEVASTANE AW 46: No 123144
  4. NEVASTANE AW 68: No 123525
  • NEVASTANE AW oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HM.
  • NEVASTANE AW oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE AW oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Excellent anti-wear and corrosion protection.
  • Miscible with mineral fluids.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane Flush Oil - Flushing and cleaning oil - 127575

Total Nevastane Flush Oil - Flushing and cleaning oil - 127575

 

Flushing and cleaning oil, suitable for incidental food contact.

 

Applications:

  • NEVASTANE FLUSH OIL is a very low viscosity fluid for cleaning and flushing of oil and residues in mechanical systems in the food industry: hyrdraulics, gear reducers, chains and other moving components.
  • NEVASTANE FLUSH OIL is ideal for changing from standard lubricant to NSF H1 lubricant, suitable for incidental food contact.
  • NEVASTANE FLUSH OIL is non corrosive to metals and is compatible with petroleum products and synthetics (based on PAG/ester but not on PAG/MPG).

 

Specifications:

  • The formulation of NEVASTANE FLUSH OIL based on white mineral oil complies with FDA, chapter 21 CFR, 178.3570.
  • NEVASTANE FLUSH OIL is NSF H1 registered: No 123139.
  • NEVASTANE FLUSH OIL is Kosher and ISO 21469 certified.
  • NEVASTANE FLUSH OIL is a biostable product, it does not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE FLUSH OIL is recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Elimination of deposits and impurities.
  • Excellent solvent power.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane EP 100 - Mineral gear oils - 127590

Total Nevastane EP 100 - Mineral gear oils - 127590

 

Mineral gear oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
  • NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
  • NEVASTANE EP formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

  • The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE EP oils are NSF H1 registered:
  1. NEVASTANE EP 100: No 127081
  2. NEVASTANE EP 150 : No 123563
  3. NEVASTANE EP 220: No 123523
  4. NEVASTANE EP 320: No 123143
  5. NEVASTANE EP 460: No 123564
  6. NEVASTANE EP 680: No 135815
  7. NEVASTANE EP 1000: No 123561
  • NEVASTANE EP oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • NEVASTANE EP oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Superior protection against high loads.
  • Adapted to a wide range of applications.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane EP 150 - Mineral gear oils - 127591

Total Nevastane EP 150 - Mineral gear oils - 127591

 

Mineral gear oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
  • NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
  • NEVASTANE EP formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

  • The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE EP oils are NSF H1 registered:
  1. NEVASTANE EP 100: No 127081
  2. NEVASTANE EP 150 : No 123563
  3. NEVASTANE EP 220: No 123523
  4. NEVASTANE EP 320: No 123143
  5. NEVASTANE EP 460: No 123564
  6. NEVASTANE EP 680: No 135815
  7. NEVASTANE EP 1000: No 123561
  • NEVASTANE EP oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • NEVASTANE EP oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Superior protection against high loads.
  • Adapted to a wide range of applications.

 

Pack sizes available - 5 US Gallons, 20L

Discover More +
Total Nevastane EP 220 - Mineral gear oils - 127593

Total Nevastane EP 220 - Mineral gear oils - 127593

 

Mineral gear oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
  • NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
  • NEVASTANE EP formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

  • The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE EP oils are NSF H1 registered:
  1. NEVASTANE EP 100: No 127081
  2. NEVASTANE EP 150 : No 123563
  3. NEVASTANE EP 220: No 123523
  4. NEVASTANE EP 320: No 123143
  5. NEVASTANE EP 460: No 123564
  6. NEVASTANE EP 680: No 135815
  7. NEVASTANE EP 1000: No 123561
  • NEVASTANE EP oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • NEVASTANE EP oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Superior protection against high loads.
  • Adapted to a wide range of applications.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane EP 460 - Mineral gear oils - 127601

Total Nevastane EP 460 - Mineral gear oils - 127601

 

Mineral gear oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
  • NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
  • NEVASTANE EP formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

  • The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE EP oils are NSF H1 registered:
  1. NEVASTANE EP 100: No 127081
  2. NEVASTANE EP 150 : No 123563
  3. NEVASTANE EP 220: No 123523
  4. NEVASTANE EP 320: No 123143
  5. NEVASTANE EP 460: No 123564
  6. NEVASTANE EP 680: No 135815
  7. NEVASTANE EP 1000: No 123561
  • NEVASTANE EP oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • NEVASTANE EP oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Superior protection against high loads.
  • Adapted to a wide range of applications.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane EP 320 - Mineral gear oils - 134002

Total Nevastane EP 320 - Mineral gear oils - 134002

 

Mineral gear oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
  • NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
  • NEVASTANE EP formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

  • The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE EP oils are NSF H1 registered:
  1. NEVASTANE EP 100: No 127081
  2. NEVASTANE EP 150 : No 123563
  3. NEVASTANE EP 220: No 123523
  4. NEVASTANE EP 320: No 123143
  5. NEVASTANE EP 460: No 123564
  6. NEVASTANE EP 680: No 135815
  7. NEVASTANE EP 1000: No 123561
  • NEVASTANE EP oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • NEVASTANE EP oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Superior protection against high loads.
  • Adapted to a wide range of applications.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Finavestan A 520 B - Medicinal White Oils - 153640

Total Finavestan A 520 B - Medicinal White Oils - 153640

 

Applications:

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:
  • Polymer: plasticizer & external lubricant for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
  • Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
  • Paper: cut and slit lubricant.
  • Dust binder, defoamer, furniture polishes.
The application is subject to the applicable laws and regulations in each country.
  • CAS number: 8042-47-5
  • EINECS number: 232-455-8
  • INCI number (EU): Paraffinum Liquidum

 

Specifications:

 

FINAVESTAN white oils meet the requirements of the following specifications:
  • European Pharmacopoeia, most recent edition
  • US Pharmacopoeia, most recent edition
  • US FDA, 21 CFR 178.3620(a), White Mineral Oil
  • European Regulation 2011/10/CE relating to plastic materials and articles intended to come into contact with foodstuffs.
  • FINAVESTAN white oils are NSF H1 registered, suitable for incidental food contact.

 

Advantages:

  • FINAVESTAN white oils are obtained from petroleum through several important refining stages that guaranty their extremely high purity.
  • FINAVESTAN are transparent and colourless oils. They are also odourless and tasteless.
  • As medicinal grades, FINAVESTAN white oils meet the requirements of the cosmetic, pharmaceutical and food-related industry subject to the regulations in each country.

 

Pack sizes available - 208L drums

Discover More +
Castrol Optileb GT 150 - Synthetic NSF H1 gear lubricant - 3575

Castrol Optileb GT 150 - Synthetic NSF H1 gear lubricant - 3575

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:

  • Please observe the viscosity guidelines specified by the manufacturer.
  • Good compatibility with conventional sealing materials.
  • As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 17kg can, 208ltr barrel

Discover More +
Castrol Optileb GT 320 - Synthetic NSF H1 gear lubricant - 3576

Castrol Optileb GT 320 - Synthetic NSF H1 gear lubricant - 3576

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:

  • Please observe the viscosity guidelines specified by the manufacturer.
  • Good compatibility with conventional sealing materials.
  • As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 20ltr, 208ltr barrel

Discover More +
Castrol Optileb GT 220 - Synthetic NSF H1 gear lubricant - 3596

Castrol Optileb GT 220 - Synthetic NSF H1 gear lubricant - 3596

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:
Please observe the viscosity guidelines specified by the manufacturer.
Good compatibility with conventional sealing materials.
As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 20ltr

Discover More +
Castrol Optileb GT 460 - Synthetic NSF H1 gear lubricant - 3598

Castrol Optileb GT 460 - Synthetic NSF H1 gear lubricant - 3598

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:
Please observe the viscosity guidelines specified by the manufacturer.
Good compatibility with conventional sealing materials.
As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 20ltr

Discover More +
Castrol Optileb GT 100 - Food Grade Gear Oil - 3599

Castrol Optileb GT 100 - Food Grade Gear Oil - 3599

 

Castrol Optileb® GT gear oils are in conformity and even exceed the requirements of DIN 51517 Part 3 CLP. USDA. H1 / NSF Approved certificate no. 134148.
Castrol Optileb® GT oils are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion.

 

Application

Castrol Optileb® GT oils are gear oils with USDA H1 authorisation, especially developed to meet the special requirements in the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. They are used for spur, angular and worm gears, for gear motors of stirring machines, turners, packaging machines etc, for chain variators, for rolling and sliding bearings and for pumps and closed circulating systems.


Advantages

  • Optitec technology - Physiologically safe, USDA H1 authorised, odourless, tasteless and colourless
  • Excellent viscosity/temperature behaviour - Wide temperature range
  • Neutral to non-ferrous metals - Can be used in all gearbox designs
  • Good water separation ability & No foam formation - Increased oil life
  • Miscible with mineral oil, Disposal like mineral oil - No compatibility problems
  • Excellent wear, oxidation and corrosion protection & high load carrying capacity - Improved oil and component life

 

Pack sizes available - 20L

Discover More +
Castrol Optileb HY 68 - Food Grade Hydraulic Oils - 3600

Castrol Optileb HY 68 - Food Grade Hydraulic Oils - 3600

 

Castrol Optileb HY 68 is primarily designed as a non-toxic hydraulic fluid, manufactured solely from FDA (United States Food and Drugs Administration) listed ingredients for use within the food processing industry, particularly where incidental contact with foodstuffs may occur. Optileb HY 68 is USDA H1 / NSF Approved certificate no. 134153.

 

Application

Castrol Optileb HY grades have excellent anti-wear performance and can be used in hydraulic systems with all types of pumps and motors at their rated speeds and pressures. They are extremely resistant to water wash and offer excellent corrosion protection, making them also suitable for use as a light lubricating oil in wet environments or in applications where equipment is frequently washed down. It is recommended that systems being converted to Optileb HY grades are thoroughly drained and flushed before filling to prevent contamination with previous hydraulic fluid.

 

 

User benefits include:

  • Contain only FDA listed raw materials
  • Authorised by USDA for Category H1 service
  • Non staining, Non toxic
  • Food grade lubricant
  • Excellent anti-wear performance
  • Minimising component wear, giving long term reliability of pumps and motors
  • Extremely water resistant
  • Gives excellent corrosion protection

 

Pack sizes available - 20ltr, 208ltr barrel

Discover More +
Total Nevastane SL 32 - Compressors, pneumatic and hydraulic oils - 127413

Total Nevastane SL 32 - Compressors, pneumatic and hydraulic oils - 127413

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane SL 220 - Synthetic (PAO) gear oils - 127415

Total Nevastane SL 220 - Synthetic (PAO) gear oils, suitable for incidental food contact. - 127415

 

Applications:

  • Nevastane SL oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.
  • Nevastane SL 150 to 460 oils are also suitable for the lubrication of numerous applicacations in the food industry such as chains and conveyor belts.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

             - Nevastane SL 150: No 125584 Nevastane SL 220: No 125585
             - Nevastane SL 320: No 125578 Nevastane SL 460: No 125579

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane SL 320 - Synthetic (PAO) gear oils - 127416

Total Nevastane SL 320 - Synthetic (PAO) gear oils, suitable for incidental food contact. - 127416

 

Applications:

  • Nevastane SL oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.
  • Nevastane SL 150 to 460 oils are also suitable for the lubrication of numerous applicacations in the food industry such as chains and conveyor belts.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

             - Nevastane SL 150: No 125584 Nevastane SL 220: No 125585
             - Nevastane SL 320: No 125578 Nevastane SL 460: No 125579

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane SL 46 - Compressors, pneumatic and hydraulic oils - 127544

Total Nevastane SL 46 - Compressors, pneumatic and hydraulic oils - 127544

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Nevastane SL 68 - Compressors, pneumatic and hydraulic oils - 127556

Total Nevastane SL 68 - Compressors, pneumatic and hydraulic oils - 127556

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane SL 100 - Compressors, pneumatic and hydraulic oils - 127557

Total Nevastane SL 100 - Compressors, pneumatic and hydraulic oils - 127557

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • Nevastane SL oils (grades 32 to 100) are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

               - Nevastane SL 32: No 125580 Nevastane SL 46: No 125581
               - Nevastane SL 68: No 125582 Nevastane SL 100: No 125583

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 HV.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimizes your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane SL 150 - Synthetic (PAO) gear oils - 127558

Total Nevastane SL 150 - Synthetic (PAO) gear oils, suitable for incidental food contact. - 127558

 

Applications:

  • Nevastane SL oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.
  • Nevastane SL 150 to 460 oils are also suitable for the lubrication of numerous applicacations in the food industry such as chains and conveyor belts.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

             - Nevastane SL 150: No 125584 Nevastane SL 220: No 125585
             - Nevastane SL 320: No 125578 Nevastane SL 460: No 125579

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane SL 460 - Synthetic (PAO) gear oils - 127573

Total Nevastane SL 460 - Synthetic (PAO) gear oils, suitable for incidental food contact. - 127573

 

Applications:

  • Nevastane SL oils (grades 150 to 460) are recommended for the lubrication of gear reducers, plains and roller bearings with high loads in the food processing industries.
  • Nevastane SL 150 to 460 oils are also suitable for the lubrication of numerous applicacations in the food industry such as chains and conveyor belts.
  • Nevastane SL formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

  • The formulation of Nevastane SL oils complies with the FDA chapter 21 CFR, 178.3570.
  • Nevastane SL oils are NSF H1 registered:

             - Nevastane SL 150: No 125584 Nevastane SL 220: No 125585
             - Nevastane SL 320: No 125578 Nevastane SL 460: No 125579

  • Nevastane SL oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • Nevastane SL oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SL oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane SY 460 - Synthetic (PAG) gear oils - 134022

Total Nevastane SY 460 - Synthetic (PAG) gear oils, suitable for incidental food contact. - 134022

 

Applications:

  • Nevastane SY oils are adapted for the lubrication of numerous applications in the food and beverage industry with high loads, high temperatures and in presence of water.
  • Nevastane SY oils are specially recommended for the lubrication of worm gears and reducers, high temperature oven chains and bottling equipments.
  • Nevastane SY formulation, 100% synthetic, based on polyglycol and high performance additives, provides outstanding extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

The formulation of Nevastane SY oils complies with the FDA chapter 21 CFR, 178.3570.

Nevastane SY oils are NSF H1 registered:

  • Nevastane SY 220: No 133737
  • Nevastane SY 320: No 133738
  • Nevastane SY 460: No 133739

Nevastane SY oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SY oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Excellent thermal stability.
  • Excellent resistance to water.
  • Superior extreme pressure, anti-oxidation and anti-wear characteristics.

 

Pack sizes available - 25kg, 210kg drum

Discover More +
Total Nevastane SY 220 - Synthetic (PAG) gear oils - 134023

Total Nevastane SY 220 - Synthetic (PAG) gear oils, suitable for incidental food contact. - 134023

 

Applications:

  • Nevastane SY oils are adapted for the lubrication of numerous applications in the food and beverage industry with high loads, high temperatures and in presence of water.
  • Nevastane SY oils are specially recommended for the lubrication of worm gears and reducers, high temperature oven chains and bottling equipments.
  • Nevastane SY formulation, 100% synthetic, based on polyglycol and high performance additives, provides outstanding extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

The formulation of Nevastane SY oils complies with the FDA chapter 21 CFR, 178.3570.

Nevastane SY oils are NSF H1 registered:

  • Nevastane SY 220: No 133737
  • Nevastane SY 320: No 133738
  • Nevastane SY 460: No 133739

Nevastane SY oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • Nevastane SY oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Excellent thermal stability.
  • Excellent resistance to water.
  • Superior extreme pressure, anti-oxidation and anti-wear characteristics.

 

Pack sizes available - 25kg

Discover More +
Total Nevastane SDO - Sugar dissolving oil - 157453

Total Nevastane SDO - Sugar dissolving oil, for incidental food contact. - 157453

 

Applications:

  • Nevastane SDO is a sugar dissoving oil. It can be used in 2 ways:

               - to prevent sugar build-up on various parts of the machines (centrifugal extractor for sugar industry, conveyors, wrapping machines…).
               - to dissolve sugar and fondant from all surfaces (production lines, floors…).

  • Nevastane SDO is recommended in the plants producing confectionary, sugar, chocolate, biscuits, soft drinks…
  • Nevastane SDO is easy to apply by brush, drip or with a spray bottle.

 

Specifications:

  • The formulation of Nevastane SDO complies with FDA, 21 CFR, 178.3570.
  • Nevastane SDO is NSF H1 registered No 139992.

 

 

Advantages: 

  • Nevastane SDO can be used neat (recommended) or diluted with water. It depends on the application and the quantity of sugar to remove.
  • Dissolving sugar easily, Nevastane SDO:

              - reduces time of maintenance by eliminating sugar in production plants.
              - prevents expensive shutdowns due to important sugar build-up.

 

Pack sizes available - 10ltr

Discover More +
Total Nevastane HTF - Heat transfer fluid for incidental food contact - 168517

Total Nevastane HTF - Heat transfer fluid for incidental food contact - 168517

 

Applications:

  • Nevastane HTF is a heat transfer fluid designed for closed circuits and a large number of applications in the food and pharmaceutical industries: double-boilers, autoclaves, reactors, ovens, presses and moulds.
  • Process temperature: <300 °C (330 °C in the oil film) without air contact.
  • To ensure the consistency of the physical and chemical properties, a monitoring by analyses of the NEVASTANE HTF in use is recommended.

 

 

Specifications: 

  • The formulation of Nevastane HTF based on white mineral oil complies with FDA, chapter 21 CFR, 178.3570.
  • Nevastane HTF is NSF H1 registered: No 131004.
  • Nevastane HTF is kosher and ISO 21469 certified.
  • Nevastane HTF is a biostable product, it does not promote the development of bacteria and mould.
  • ISO 6743/12 class L family QC
  • DIN 51502 class L

  

 

Advantages:  

  • Nevastane HTF is recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Exceptional resistance to high temperature.
  • Long service life under severe conditions of use.

 

Pack sizes available - 208ltr drum

Discover More +
Castrol Viscoleb 150 - Fully synthetic chain lubricants - 3742

Castrol Viscoleb 150 - Fully synthetic chain lubricants, physiologically safe, NSF H1 authorized - 3742

 

VISCOLEB are chain lubricants especially developed to meet the requirements of the food and beverage industries. They are water-resistant and have a high load carrying capacity. VISCOLEB are tasteless and odourless oils. Special additives specifically protect from wear and prevent corrosion. VISCOLEB chain lubricants are NSF H1 authorized and therefore suited for applications where a direct exposure of the lubricated part to the edible product is possible due to technical reasons.

 

Application

  • For the special requirements in the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging
  • For chains of production, filling and packaging machines
  • For slideways, central lubrication systems, spraying systems (product consolidation)
  • Temperature application ranges: VISCOLEB 150: - 30°C/- 22°F to + 200°C/+ 392°F

 

 

User benefits include:

  • OPTITEC™ - CASTROL OPTIMOL technology
  • physiologically safe
  • NSF H1 authorized
  • tasteless and odourless
  • transparent
  • resistant to water
  • compatible with mineral oil, therefore no prior cleaning of the chains when converting to VISCOLEB
  • good penetration
  • excellent adherence
  • optimum corrosion and wear protection

 

Additional Information:

  • VISCOLEB oils are compatible with mineral oil, therefore prior cleaning of the chains is not necessary during conversion.
  • However, cleaning of heavily contaminated chains is advisable in order to ensure easy penetration of VISCOLEB.
  • For application in central lubrication and spraying systems please observe the specified viscosity.

 

Pack sizes available - 4.5kg can, 20ltr

Discover More +
Castrol Optileb HY 32 - Food Grade Hydraulic Oils - 3770

Castrol Optileb HY 32 - Food Grade Hydraulic Oils - 3770



Castrol Optileb HY 32 is primarily a non-toxic hydraulic fluid, manufactured solely from FDA (United States Food and Drugs Administration) listed ingredients for use within the food processing industry, particularly where incidental contact with foodstuffs may occur. Optileb HY 32 is USDA H1 / NSF Approved certificate no. 134151.

NSF-H1 approved Hydraulic range meeting DIN 51524 part 2 HLP.


Application

Castrol Optileb HY grades have excellent anti-wear performance and can be used in hydraulic systems with all types of pumps and motors at their rated speeds and pressures. They are extremely resistant to water wash and offer excellent corrosion protection, making them also suitable for use as a light lubricating oil in wet environments or in applications where equipment is frequently washed down. It is recommended that systems being converted to Optileb HY grades are thoroughly drained and flushed before filling to prevent contamination with previous hydraulic fluid.
Optileb HY 32 is ideal for use as an airline lubricant for the lubrication of compressed air powered equipment for food and beverage processing and packaging. It is suitable for use with both manual and automatically lubricated airlines. Optileb HY 32 prevents scum build-up and vane scorching in airline motors


Advantages

  • Contain only FDA listed raw materials - Authorised by USDA for Category H1 service
  • Non staining, Non toxic - Food grade lubricant
  • Excellent anti-wear performance - Minimising component wear, giving long term reliability of pumps and motors
  • Extremely water resistant - Gives excellent corrosion protection


 

ISO Viscosity and pack sizes available
OPTILEB HY 32 – 20L & 208L
OPTILEB HY 46 – 20L

Discover More +
Castrol Optileb HY 46 - Food Grade Hydraulic Oils - 3773

Castrol Optileb HY 46 - Food Grade Hydraulic Oils - 3773



Castrol Optileb HY is primarily a non-toxic hydraulic fluid, manufactured solely from FDA (United States Food and Drugs Administration) listed ingredients for use within the food processing industry, particularly where incidental contact with foodstuffs may occur. Optileb HY 32 is USDA H1 / NSF Approved certificate no. 134151.

NSF-H1 approved Hydraulic range meeting DIN 51524 part 2 HLP.


Application

Castrol Optileb HY grades have excellent anti-wear performance and can be used in hydraulic systems with all types of pumps and motors at their rated speeds and pressures. They are extremely resistant to water wash and offer excellent corrosion protection, making them also suitable for use as a light lubricating oil in wet environments or in applications where equipment is frequently washed down. It is recommended that systems being converted to Optileb HY grades are thoroughly drained and flushed before filling to prevent contamination with previous hydraulic fluid. Optileb HY 32 is ideal for use as an airline lubricant for the lubrication of compressed air powered equipment for food and beverage processing and packaging. It is suitable for use with both manual and automatically lubricated airlines. Optileb HY 32 prevents scum build-up and vane scorching in airline motors


Advantages

  • Contain only FDA listed raw materials - Authorised by USDA for Category H1 service
  • Non staining, Non toxic - Food grade lubricant
  • Excellent anti-wear performance - Minimising component wear, giving long term reliability of pumps and motors
  • Extremely water resistant - Gives excellent corrosion protection


 

ISO Viscosity and pack sizes available
OPTILEB HY 32 – 20L & 208L
OPTILEB HY 46 – 20L

Discover More +
Castrol Tribol Foodproof 1810-220 - Food Machinery Gear Oil - 4350

Castrol Tribol Foodproof 1810-220 - Food Machinery Gear Oil - 4350

 

Tribol Foodproof 1810 Food Machinery Oils are extreme pressure and anti-wear gear oils with exceptional load carrying capabilities. USDA H1 / NSF Approved certificate no. 134154.

Available in 180Kg drum.

 

Application

Tribol Foodproof 1810 Food Machinery Gear Oils are high performance gear oils, formulated especially to meet the stringent requirements of USDA 'H1' approval and are designed for use in the food and beverage industry where incidental contact with food is possible. Tribol Foodproof 1810 Food Machinery Gear Oils are for service in all types of enclosed gear drives where exceptional EP and anti-wear properties are required. They are available in ISO viscosity grades 220, 320 and 460. Foaming is controlled by the use of special components and inhibitors. Tribol Foodproof 1810 Food Machinery Gear Oils are for use in spur, helical, herringbone and straight or spiral bevel gears where incidental contact with food is possible. They are especially used for heavy duty and shock loading where extreme pressure (EP) characteristics are needed. Tribol Foodproof 1810 Food Machinery Gear Oils can be applied by oil can, oil cup reservoir, splash, spray mist, or by automatic dispensing equipment and central or circulation systems. Tribol Foodproof 1810 Food Machinery Gear Oils possess good water separation properties making them ideal for use in breweries and the beverage industry.

 

 

User benefits include:

  • Exceptional oxidation resistance
  • Offering prolonged lifetime of oil
  • High load carrying ability
  • Shown by the result (> 12 stages) in the FZG Test
  • Optimal use of anti-wear additives
  • Exceptional anti-wear properties
  • USDA 'H1' approved/certified
  • Food quality oils
Discover More +
Castrol Tribol Foodproof 1810-320 - Food Machinery Gear Oil - 4351

Castrol Tribol Foodproof 1810-320 - Food Machinery Gear Oil - 4351

 

Tribol 1810 Food Machinery Oils are extreme pressure and anti-wear gear oils with exceptional load carrying capabilities. USDA H1 / NSF Approved certificate no. 134155.

Available in 16Kg cans

 

Application

Tribol 1810 Food Machinery Gear Oils are high performance gear oils, formulated especially to meet the stringent requirements of USDA 'H1' approval and are designed for use in the food and beverage industry where incidental contact with food is possible. Tribol 1810 Food Machinery Gear Oils are for service in all types of enclosed gear drives where exceptional EP and anti-wear properties are required. They are available in ISO viscosity grades 220, 320 and 460. Foaming is controlled by the use of special components and inhibitors. Tribol 1810 Food Machinery Gear Oils are for use in spur, helical, herringbone and straight or spiral bevel gears where incidental contact with food is possible. They are especially used for heavy duty and shock loading where extreme pressure (EP) characteristics are needed. Tribol 1810 Food Machinery Gear Oils can be applied by oil can, oil cup reservoir, splash, spray mist, or by automatic dispensing equipment and central or circulation systems. Tribol 1810 Food Machinery Gear Oils possess good water separation properties making them ideal for use in breweries and the beverage industry.

 

 

User benefits include:

  • Exceptional oxidation resistance
  • Offering prolonged lifetime of oil
  • High load carrying ability
  • Shown by the result (> 12 stages) in the FZG Test
  • Optimal use of anti-wear additives
  • Exceptional anti-wear properties
  • USDA 'H1' approved/certified
  • Food quality oils
Discover More +
Castrol Tribol 1840-22 Foodproof - Food Machinery Hydraulic Oil - 4490

Castrol Tribol 1840-22 Foodproof - Food Machinery Hydraulic Oil - 4490

 

Tribol 1840 Food Machinery Hydraulic Oils are anti-wear hydraulic oils with exceptional oxidation stability, which offers prolonged life of the oil in hydraulic systems. USDA H1 / NSF Approved certificate no. 134157.

Available in 16Kg cans

 

Application

Tribol 1840 Food Machinery Hydraulic Oils are high performance hydraulic oils, formulated especially to meet stringent requirements of the US Department of Agriculture 'H1' approval and are designed for use in the food and beverage industry where incidental contact with food is possible. They are available in ISO viscosity grades 22, 32, 46 and 68. Foaming is controlled by the use of special components and inhibitors. Tribol 1840 Food Machinery Hydraulic Oils are for use in hydraulic systems where anti-wear and anti-oxidation properties are required. Tribol 1840/22 is particularly suited for use in airlines and lubrication for pneumatic systems. Tribol 1840 oils possess good water separation properties making them ideal for use in breweries and the beverage industry.

 

 

User benefits include:

  • Exceptional anti-wear properties
  • Exceptional oxidation resistance - offering prolonged oil lifetimes compared with standard hydraulic oils and white oils normally used in the food industry
  • High load carrying ability - shown by the result (> 12 stages) in the FZG Test
  • Meets the requirements of USDA 'H1' - food quaility oil
Discover More +
Castrol Tribol 1840-32 Foodproof - Food Machinery Hydraulic Oil - 4491

Castrol Tribol 1840-32 Foodproof - Food Machinery Hydraulic Oil - 4491

 

Tribol 1840 Food Machinery Hydraulic Oils are anti-wear hydraulic oils with exceptional oxidation stability, which offers prolonged life of the oil in hydraulic systems. USDA H1 / NSF Approved certificate no. 134157.

Available in 16Kg cans

 

Application

Tribol 1840 Food Machinery Hydraulic Oils are high performance hydraulic oils, formulated especially to meet stringent requirements of the US Department of Agriculture 'H1' approval and are designed for use in the food and beverage industry where incidental contact with food is possible. They are available in ISO viscosity grades 22, 32, 46 and 68. Foaming is controlled by the use of special components and inhibitors. Tribol 1840 Food Machinery Hydraulic Oils are for use in hydraulic systems where anti-wear and anti-oxidation properties are required. Tribol 1840/22 is particularly suited for use in airlines and lubrication for pneumatic systems. Tribol 1840 oils possess good water separation properties making them ideal for use in breweries and the beverage industry.

 

 

User benefits include:

  • Exceptional anti-wear properties
  • Exceptional oxidation resistance - offering prolonged oil lifetimes compared with standard hydraulic oils and white oils normally used in the food industry
  • High load carrying ability - shown by the result (> 12 stages) in the FZG Test
  • Meets the requirements of USDA 'H1' - food quaility oil
Discover More +
Castrol Tribol 1840-46 Foodproof - Food Machinery Hydraulic Oil - 4492

Castrol Tribol 1840-46 Foodproof - Food Machinery Hydraulic Oil - 4492

 

Tribol 1840 Food Machinery Hydraulic Oils are anti-wear hydraulic oils with exceptional oxidation stability, which offers prolonged life of the oil in hydraulic systems. USDA H1 / NSF Approved certificate no. 134157.

Available in 180Kg Drums

 

Application

Tribol 1840 Food Machinery Hydraulic Oils are high performance hydraulic oils, formulated especially to meet stringent requirements of the US Department of Agriculture 'H1' approval and are designed for use in the food and beverage industry where incidental contact with food is possible. They are available in ISO viscosity grades 22, 32, 46 and 68. Foaming is controlled by the use of special components and inhibitors. Tribol 1840 Food Machinery Hydraulic Oils are for use in hydraulic systems where anti-wear and anti-oxidation properties are required. Tribol 1840/22 is particularly suited for use in airlines and lubrication for pneumatic systems. Tribol 1840 oils possess good water separation properties making them ideal for use in breweries and the beverage industry.

 

 

User benefits include:

  • Exceptional anti-wear properties
  • Exceptional oxidation resistance - offering prolonged oil lifetimes compared with standard hydraulic oils and white oils normally used in the food industry
  • High load carrying ability - shown by the result (> 12 stages) in the FZG Test
  • Meets the requirements of USDA 'H1' - food quaility oil
Discover More +
Castrol Whitemor WOM 65 - Medicinal White Oils - 6925

Castrol Whitemor WOM 65 - Medicinal White Oils - 6925

 

Castrol Medicinal White Oils under the Whitemor branding are highly refined mineral oils which comply with all of the purity requirements of the current editions of the British and European Pharmacopoeias for Liquid Paraffin.

 

Applications:

Castrol Whitemor Medicinal White Oils are used in the pharmaceutical, cosmetic and plastics industries and for all other applications where extremely high standards of purity are required. Castrol Whitemor Medicinal White Oils also comply with the purity requirements of:- Mineral Hydrocarbons in Food Regulations 1966 (SI No. 1073), British, European and United States Pharmacopoeias.
Meet the FDA regulations 21 CFR 172.878 and CFR 178.3620, and USP 31 / NF 26. WOM 14 and 65 are also NSF-H1 approved for incidental contact with foodstuffs.


Advantages:

  • No staining or discolouring
  • Odourless and tasteless
  • Extremely high purity
  • NSF-H1 approved for incidental contact with foodstuffs

 

Pack sizes available – 208L, 1000L IBC, Bulk delivery

Discover More +
Total Finaturol K2 - Vegetable oil - 129390

Total Finaturol K2 - Vegetable oil - 129390

 

Vegetable oil for dough dividers and bread cutting machines.

 

Applications:

FINATUROL K2 is a vegetable oil used to prevent sticking of the dough and it is also used to prevent sticking of the dough on the knives.

 

Specifications:

  • FINATUROL K2 is a 100% vegetable oil guaranteed GMO free and made without animal products. It is made of vegetable oil and food additives which are included in the positive list of the European Directive 95/2/CE.
  • FINATUROL K2 is NSF 3H registered. It meets American laws regarding direct contact with food according to FDA, 21 CFR 182-184.
  • It meets the European laws concerning food processing aid, most of all the directive 89/107/CE.
  • FINATUROL K2 has been approved by French food agency (DGCCRF) for use as a food processing aid in bakery (maximum residual quantity in dough is 3 g/kg).
  • FINATUROL K2 meets Europeans laws 1829/2003/CE and 1830/2003/CE regarding GMO labeling.
  • FINATUROL K2 does not contain any allergenic food ingredient in compliance with the directive 2007/68/CE amending the Annex IIIa to Directive 2000/13/CE.

 

Advantages:

  • FINATUROL K2 allows to reduce oil consumption up to 20% compared to white mineral oils.
  • FINATUROL K2 increases knives lifetime.
  • Due to its specific formula, FINATUROL K2 does not change the taste nor the colour of the finished product.

 

Pack sizes available - 208ltr drums

Discover More +
Total Finaturol HT - Vegetable demoulding oil for high temperatures - 129942

Total Finaturol HT - Vegetable demoulding oil for high temperatures - 129942

 

Applications:

  • FINATUROL HT is a vegetable demoulding oil. It is used for severe moulding operations after they have come out of the oven.
  • FINATUROL HT guarantees a perfect demoulding operation for all bakery and pastry products and it respects the taste and odor of the finished product even for products with a long shelf life.
  • The film is maintained during the baking of the products. It ensures excellent demoulding performances and it prevents sticking.

 

Specifications:

  • FINATUROL HT is a 100% vegetable oil guaranteed GMO free and made without animal products. It is a mixture of vegetable oils and food additives which are included in the positive list of the European directive 95/2/CE.
  • FINATUROL HT meets the international laws concerning food processing aids. Its use is subjected to the applicable laws and regulations in each country.
  • It may be used in direct contact with food according to USA FDA CFR 182-184
  • FINATUROL HT complies with 1829/2003/CE and regulations related to the labeling of GMO (GMO free).
  • FINATUROL HT is free of food allergens in compliance with 2000/13/CE and 2003/89/CE.

 

Advantages:

  • Due to its excellent resistance to oxidation, FINATUROL HT prevents deposit formation, thus reducing the cleaning frequency. It extends the life of the equipments and of the mould coating.
  • FINATUROL HT allows to significantly reduce oil consumption (up to 40%) in comparison to conventional demoulding agents ( vegetable or white mineral oils).
  • Due to its specific formula, FINATUROL HT does not change the taste nor the odor of the finished product.
  • FINATUROL HT is a homogeneous liquid which doesn’t require pre-heating. Its viscosity allows the customer to use it in a spraying system without heating it.

 

Pack sizes available - 208ltr drums

Discover More +
Total Nevastane SH 32 - Compressors, pneumatic and hydraulic oils - 190483

Total Nevastane SH 32 - Compressors, pneumatic and hydraulic oils - 190483

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

The formulation of NEVASTANE SH oils complies with the FDA chapter 21 CFR, 178.3570.

NEVASTANE SH oils are NSF H1 registered:

  • NEVASTANE SH 32: No 147292
  • NEVASTANE SH 46: No 147293
  • NEVASTANE SH 68: No 147294
  • NEVASTANE SH 100: No 147295

NEVASTANE SH oils are Kosher, Halal and ISO 21469 certified.

International specification: ISO 6743-4 HV.

 

Advantages:

  • NEVASTANE SH oils are recommended for use where incidental food contact is possible. That prevents contamination issues as required by the HACCP system.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 20ltr

Discover More +
Total Nevastane SH 46 - Compressors, pneumatic and hydraulic oils - 190486

Total Nevastane SH 46 - Compressors, pneumatic and hydraulic oils - 190486

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

The formulation of NEVASTANE SH oils complies with the FDA chapter 21 CFR, 178.3570.

NEVASTANE SH oils are NSF H1 registered:

  • NEVASTANE SH 32: No 147292
  • NEVASTANE SH 46: No 147293
  • NEVASTANE SH 68: No 147294
  • NEVASTANE SH 100: No 147295

NEVASTANE SH oils are Kosher, Halal and ISO 21469 certified.

International specification: ISO 6743-4 HV.

 

Advantages:

  • NEVASTANE SH oils are recommended for use where incidental food contact is possible. That prevents contamination issues as required by the HACCP system.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 20ltr

Discover More +
Total Nevastane SH 68 - Compressors, pneumatic and hydraulic oils - 190540

Total Nevastane SH 68 - Compressors, pneumatic and hydraulic oils - 190540

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

The formulation of NEVASTANE SH oils complies with the FDA chapter 21 CFR, 178.3570.

NEVASTANE SH oils are NSF H1 registered:

  • NEVASTANE SH 32: No 147292
  • NEVASTANE SH 46: No 147293
  • NEVASTANE SH 68: No 147294
  • NEVASTANE SH 100: No 147295

NEVASTANE SH oils are Kosher, Halal and ISO 21469 certified.

International specification: ISO 6743-4 HV.

 

Advantages:

  • NEVASTANE SH oils are recommended for use where incidental food contact is possible. That prevents contamination issues as required by the HACCP system.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 20ltr

Discover More +
Total Nevastane SH 100 - Compressors, pneumatic and hydraulic oils - 190543

Total Nevastane SH 100 - Compressors, pneumatic and hydraulic oils - 190543

 

Synthetic (PAO) oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE SH oils are recommended in the food processing industries for the lubrication of air compressors, vacuum pumps and hydraulic systems especially operating at low temperatures.
  • NEVASTANE SH formulation, 100% synthetic, based on PAO, provides superior protection and longer service life to the lubricated equipments.

 

Specifications:

The formulation of NEVASTANE SH oils complies with the FDA chapter 21 CFR, 178.3570.

NEVASTANE SH oils are NSF H1 registered:

  • NEVASTANE SH 32: No 147292
  • NEVASTANE SH 46: No 147293
  • NEVASTANE SH 68: No 147294
  • NEVASTANE SH 100: No 147295

NEVASTANE SH oils are Kosher, Halal and ISO 21469 certified.

International specification: ISO 6743-4 HV.

 

Advantages:

  • NEVASTANE SH oils are recommended for use where incidental food contact is possible. That prevents contamination issues as required by the HACCP system.
  • 100% synthetic formulation.
  • Wide temperature range.
  • Significant extensions of oil drain intervals.

 

Pack sizes available - 20ltr

Discover More +
Total Lunaria SH 68 - Compressor Oil - 157423

Total Lunaria SH 68 - Compressor Oil - 157423

 

Full-synthetic PAO based oil for ammonia (R 717) refrigerating compressors.

 

Applications:

  • Lubrication of refrigerating compressors (reciprocating and screw) using ammonia as a refrigerant.
  • PAO (polyalphaolefin) base oils to improve oil drain interval and ensure good performances even at very low temperature.
  • Field of application : evaporator temperature down to -50°C.

 

Specifications:

  • APV, BOCK, J&E HALL, GRAM, GRASSO, HOWDEN, SABROE.
  • NSF-H1 registered - certificate number: 139826: LUNARIA SH 46, 139827: LUNARIA SH 68

 

Advantages:

  • High resistance to oxidation in the presence of ammonia. Synthetic base oils and additivation system specially selected to avoid the formation of black sludges (reaction between oil and ammonia).
  • Low pour point, eliminating the risk of any residual lubricant freezing in the evaporator, thereby providing excellent heat exchange.
  • Very high flash point given the low volatility of LUNARIA SH oils: oil consumption is reduced by 30 to 50% compared with conventional oils.
  • Good compatibility with common elastomers (chloroprene, NBR….).

 

Pack sizes available - 20ltr

Discover More +
Total Orites DS 125 - Synthetic Polyalkyleneglycol Lubricant - 112639

Total Orites DS 125 - Synthetic Polyalkyleneglycol Lubricant - 112639

 

Synthetic lubricant of type Polyalkyleneglycol (PAG) with inherent anti-wear properties.

 

Applications:

  • « Once through » lubrication of Ethylene (hyper-)compressors.
  • Meets the food-grade polyethylene production requirements.

 

Specifications:

  • ISO 6743-3, DGC class (Gases with high solubility in mineral oil that reduce viscosity).
  • Recommended by SULZER-BURCKHARDT.

 

Advantages:

  • Highly increased lifetime of packings.
  • High oil film resitance towards Ethylene and good lubricity.
  • Outstanding viscosity / pressure behaviour.
  • Good behaviour in Polyethylene.
  • Does not contains any anti-oxidant that could interfere with the process.
  • Food-grade approval of the end-product which is colour- and odourless.

 

Pack sizes available - 200kg

Discover More +