Kernow Oils - Lubricant Solutions

Oils

Total Nevastane EP 150 - Mineral gear oils - 127591

Total Nevastane EP 150 - Mineral gear oils - 127591

 

Mineral gear oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
  • NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
  • NEVASTANE EP formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

  • The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE EP oils are NSF H1 registered:
  1. NEVASTANE EP 100: No 127081
  2. NEVASTANE EP 150 : No 123563
  3. NEVASTANE EP 220: No 123523
  4. NEVASTANE EP 320: No 123143
  5. NEVASTANE EP 460: No 123564
  6. NEVASTANE EP 680: No 135815
  7. NEVASTANE EP 1000: No 123561
  • NEVASTANE EP oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • NEVASTANE EP oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Superior protection against high loads.
  • Adapted to a wide range of applications.

 

Pack sizes available - 5 US Gallons, 20L

Discover More +
Total Nevastane EP 220 - Mineral gear oils - 127593

Total Nevastane EP 220 - Mineral gear oils - 127593

 

Mineral gear oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
  • NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
  • NEVASTANE EP formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

  • The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE EP oils are NSF H1 registered:
  1. NEVASTANE EP 100: No 127081
  2. NEVASTANE EP 150 : No 123563
  3. NEVASTANE EP 220: No 123523
  4. NEVASTANE EP 320: No 123143
  5. NEVASTANE EP 460: No 123564
  6. NEVASTANE EP 680: No 135815
  7. NEVASTANE EP 1000: No 123561
  • NEVASTANE EP oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • NEVASTANE EP oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Superior protection against high loads.
  • Adapted to a wide range of applications.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane EP 460 - Mineral gear oils - 127601

Total Nevastane EP 460 - Mineral gear oils - 127601

 

Mineral gear oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
  • NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
  • NEVASTANE EP formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

  • The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE EP oils are NSF H1 registered:
  1. NEVASTANE EP 100: No 127081
  2. NEVASTANE EP 150 : No 123563
  3. NEVASTANE EP 220: No 123523
  4. NEVASTANE EP 320: No 123143
  5. NEVASTANE EP 460: No 123564
  6. NEVASTANE EP 680: No 135815
  7. NEVASTANE EP 1000: No 123561
  • NEVASTANE EP oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • NEVASTANE EP oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Superior protection against high loads.
  • Adapted to a wide range of applications.

 

Pack sizes available - 5 US Gallons

Discover More +
Total Nevastane EP 320 - Mineral gear oils - 134002

Total Nevastane EP 320 - Mineral gear oils - 134002

 

Mineral gear oils, suitable for incidental food contact.

 

Applications:

  • NEVASTANE EP oils are recommended for the lubrication of gear reducers, plain and roller bearings with high loads in the food processing industries.
  • NEVASTANE EP oils are also suitable for the lubrication of numerous applications in the food industry such as chains and conveyor belts.
  • NEVASTANE EP formulation is based on white mineral oil and high performance additives provides excellent extreme-pressure, anti-wear and anti-oxidant properties.

 

Specifications:

  • The formulation of NEVASTANE EP oils complies with the FDA chapter 21 CFR, 178.3570.
  • NEVASTANE EP oils are NSF H1 registered:
  1. NEVASTANE EP 100: No 127081
  2. NEVASTANE EP 150 : No 123563
  3. NEVASTANE EP 220: No 123523
  4. NEVASTANE EP 320: No 123143
  5. NEVASTANE EP 460: No 123564
  6. NEVASTANE EP 680: No 135815
  7. NEVASTANE EP 1000: No 123561
  • NEVASTANE EP oils are Kosher and ISO 21469 certified.
  • International specification: ISO 6743-4 CKC.
  • NEVASTANE EP oils are biostable products, they do not promote the development of bacteria and mould.

 

Advantages:

  • NEVASTANE EP oils are recommended for use where incidental contact with food may occur. Using maintenance lubricants which have been registered H1 with NSF minimises your critical control points as required by HACCP.
  • Superior protection against high loads.
  • Adapted to a wide range of applications.

 

Pack sizes available - 5 US Gallons, 55 US Gallons

Discover More +
Total Finavestan A 520 B - Medicinal White Oils - 153640

Total Finavestan A 520 B - Medicinal White Oils - 153640

 

Applications:

FINAVESTAN white oils are used in a variety of applications that require high purity and high performance, in particular:
  • Polymer: plasticizer & external lubricant for the polystyrene, polyethylene, polypropylene; catalyst carrier and pigment dispersant.
  • Pharmaceuticals: laxatives, creams and ointments, capsule lubricant.
  • Paper: cut and slit lubricant.
  • Dust binder, defoamer, furniture polishes.
The application is subject to the applicable laws and regulations in each country.
  • CAS number: 8042-47-5
  • EINECS number: 232-455-8
  • INCI number (EU): Paraffinum Liquidum

 

Specifications:

 

FINAVESTAN white oils meet the requirements of the following specifications:
  • European Pharmacopoeia, most recent edition
  • US Pharmacopoeia, most recent edition
  • US FDA, 21 CFR 178.3620(a), White Mineral Oil
  • European Regulation 2011/10/CE relating to plastic materials and articles intended to come into contact with foodstuffs.
  • FINAVESTAN white oils are NSF H1 registered, suitable for incidental food contact.

 

Advantages:

  • FINAVESTAN white oils are obtained from petroleum through several important refining stages that guaranty their extremely high purity.
  • FINAVESTAN are transparent and colourless oils. They are also odourless and tasteless.
  • As medicinal grades, FINAVESTAN white oils meet the requirements of the cosmetic, pharmaceutical and food-related industry subject to the regulations in each country.

 

Pack sizes available - 208L drums

Discover More +
Castrol Optileb GT 150 - Synthetic NSF H1 gear lubricant - 3575

Castrol Optileb GT 150 - Synthetic NSF H1 gear lubricant - 3575

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:

  • Please observe the viscosity guidelines specified by the manufacturer.
  • Good compatibility with conventional sealing materials.
  • As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 17kg can, 208ltr barrel

Discover More +
Castrol Optileb GT 320 - Synthetic NSF H1 gear lubricant - 3576

Castrol Optileb GT 320 - Synthetic NSF H1 gear lubricant - 3576

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:

  • Please observe the viscosity guidelines specified by the manufacturer.
  • Good compatibility with conventional sealing materials.
  • As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 20ltr, 208ltr barrel

Discover More +
Castrol Optileb GT 220 - Synthetic NSF H1 gear lubricant - 3596

Castrol Optileb GT 220 - Synthetic NSF H1 gear lubricant - 3596

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:
Please observe the viscosity guidelines specified by the manufacturer.
Good compatibility with conventional sealing materials.
As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 20ltr

Discover More +
Castrol Optileb GT 460 - Synthetic NSF H1 gear lubricant - 3598

Castrol Optileb GT 460 - Synthetic NSF H1 gear lubricant - 3598

 

Optileb™ GT are gear oils with NSF H1 authorisation, especially developed to meet the special requirements of the food and beverage industries. They are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion. Optileb GT gear oils exceed the requirements of DIN 51517 part 3 CLP.

 

Application

  • For the special requirements of the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging.
  • For the lubrication of spur, angular and worm gear units.
  • For the lubrication of gear motors in stirring machines, turners, packaging machines etc.
  • For the lubrication of chain variators, rolling and sliding bearings, pumps and closed circulating systems.

 

 

User benefits include:

  • Odourless, tasteless and colourless
  • High load-carrying capacity
  • Excellent wear, oxidation and corrosion protection
  • Good water separation ability
  • No foam formation
  • Neutral to non-ferrous metals
  • Excellent viscosity/temperature behaviour
  • Miscible with mineral oil based fluids
  • Disposal of used product as with mineral oils

 

Additional Information:
Please observe the viscosity guidelines specified by the manufacturer.
Good compatibility with conventional sealing materials.
As OPTILEB GT is miscible with mineral oils, no large-scale cleaning and flushing is necessary during switchover of products.

 

Pack sizes available - 20ltr

Discover More +
Castrol Optileb GT 100 - Food Grade Gear Oil - 3599

Castrol Optileb GT 100 - Food Grade Gear Oil - 3599

 

Castrol Optileb® GT gear oils are in conformity and even exceed the requirements of DIN 51517 Part 3 CLP. USDA. H1 / NSF Approved certificate no. 134148.
Castrol Optileb® GT oils are based on synthetic oils and contain carefully selected additives to prevent wear, oxidation and corrosion.

 

Application

Castrol Optileb® GT oils are gear oils with USDA H1 authorisation, especially developed to meet the special requirements in the food and beverage industries where there may be direct exposure of the lubricated part to the edible product or its packaging. They are used for spur, angular and worm gears, for gear motors of stirring machines, turners, packaging machines etc, for chain variators, for rolling and sliding bearings and for pumps and closed circulating systems.


Advantages

  • Optitec technology - Physiologically safe, USDA H1 authorised, odourless, tasteless and colourless
  • Excellent viscosity/temperature behaviour - Wide temperature range
  • Neutral to non-ferrous metals - Can be used in all gearbox designs
  • Good water separation ability & No foam formation - Increased oil life
  • Miscible with mineral oil, Disposal like mineral oil - No compatibility problems
  • Excellent wear, oxidation and corrosion protection & high load carrying capacity - Improved oil and component life

 

Pack sizes available - 20L

Discover More +